The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevy/GMC Suburbans & Panels Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-25-2016, 10:18 AM   #1
vectorit
What?
 
vectorit's Avatar
 
Join Date: Jun 2007
Location: Southern California
Posts: 7,617
67-72 Suburban OE seats

This thread is only for OE seats for 67-72 Suburbans.
There are often questions pertaining to type of benches, and what type of brackets and hold downs were used.
So I thought that this should be a sticky thread, and for reference only when it comes to the Original Equipment seating of the 67-72 Suburban.

This includes brackets, and upholstery that were Original to the 67-72 Chevrolet and GMC Suburbans.

Often FAQ's

Will a 1972 bench seat work in my 1967 Suburban - Yes
All 67-72 benches will interchange.

Are the brackets reproduced, who makes them? - At this time 02/2016 no one is making brackets.

Are the hold down brackets reproduced, who makes them? - Yes, these can be found from various vendors. But be sure to include Blazers in your search, since often times they are sold only as Blazer brackets.
__________________
Chris
1968 K20 Suburban
1972 K10 LWB PU

Last edited by vectorit; 02-25-2016 at 10:41 AM.
vectorit is offline   Reply With Quote
Old 02-25-2016, 10:22 AM   #2
vectorit
What?
 
vectorit's Avatar
 
Join Date: Jun 2007
Location: Southern California
Posts: 7,617
Re: 67-72 Suburban OE seats

3rd row
Attached Images
     
__________________
Chris
1968 K20 Suburban
1972 K10 LWB PU

Last edited by vectorit; 02-25-2016 at 10:35 AM.
vectorit is offline   Reply With Quote
Old 02-25-2016, 10:26 AM   #3
vectorit
What?
 
vectorit's Avatar
 
Join Date: Jun 2007
Location: Southern California
Posts: 7,617
Re: 67-72 Suburban OE seats

3rd row underside. Your 67-72 Suburban should have come with the steel cross beam that has the holes and captured nuts for the hold downs. Here are a couple pictures of what they look like from the fender well.
Attached Images
   
__________________
Chris
1968 K20 Suburban
1972 K10 LWB PU
vectorit is offline   Reply With Quote
Old 02-25-2016, 10:29 AM   #4
vectorit
What?
 
vectorit's Avatar
 
Join Date: Jun 2007
Location: Southern California
Posts: 7,617
Re: 67-72 Suburban OE seats

Side view of 2nd row 3/4 bench.
Attached Images
 
__________________
Chris
1968 K20 Suburban
1972 K10 LWB PU
vectorit is offline   Reply With Quote
Old 02-25-2016, 10:31 AM   #5
vectorit
What?
 
vectorit's Avatar
 
Join Date: Jun 2007
Location: Southern California
Posts: 7,617
Re: 67-72 Suburban OE seats

2nd row bench.
Notice the short rear brackets, as compared to the full size on the 3rd bench.
Attached Images
 
__________________
Chris
1968 K20 Suburban
1972 K10 LWB PU
vectorit is offline   Reply With Quote
Old 12-10-2016, 10:09 AM   #6
iriereggaeman
Registered User
 
iriereggaeman's Avatar
 
Join Date: Oct 2016
Location: Lake Mary, FL
Posts: 139
Re: 67-72 Suburban OE seats

VectorIT - I recently purchased a '72 Suburban. I'm wanting to put in a 3rd row seat. 1st and 2nd row seats are from early 2000's Tahoe. While getting my brain wrapped around what my options might be, I noticed the floor behind the second row is wood. I assumed it was replaced after the original floor rusted out. I see in one of your photos wood as well. Now I'm second guessing my assumption. Is the wood something original from the factory!?
iriereggaeman is offline   Reply With Quote
Old 02-25-2016, 12:06 PM   #7
CG
BlahBlahBlah
 
Join Date: Feb 2002
Location: Monroe, Wa.
Posts: 19,719
Re: 67-72 Suburban OE seats

Nice write up with great pictures ... thanks!!!
__________________
… … … … … … … … ... … … … … … … … … … … …

Monroe Swap meet May 18-19.
Mike has the same spots for the NW guys he's had forever.
Lunch time BBQ at the spaces.
If you have stuff to sell bring it along.

If you have a question PM stllookn (Mike) here via the board.


https://67-72chevytrucks.com/vboard/...d.php?t=851291
CG is offline   Reply With Quote
Old 02-25-2016, 02:50 PM   #8
vectorit
What?
 
vectorit's Avatar
 
Join Date: Jun 2007
Location: Southern California
Posts: 7,617
Re: 67-72 Suburban OE seats

Front seat brackets (Thanks to Keith aka Lolife99).
Attached Images
     
__________________
Chris
1968 K20 Suburban
1972 K10 LWB PU
vectorit is offline   Reply With Quote
Old 02-26-2016, 05:13 AM   #9
rjsdad
Registered User
 
rjsdad's Avatar
 
Join Date: May 2011
Location: St. Paul, Ore.
Posts: 145
Re: 67-72 Suburban OE seats

So I can change out my 2nd row seat for my 1st row? My 1st row is kinda breaking down on the sides where I get in.
rjsdad is offline   Reply With Quote
Old 02-26-2016, 12:17 PM   #10
vectorit
What?
 
vectorit's Avatar
 
Join Date: Jun 2007
Location: Southern California
Posts: 7,617
Re: 67-72 Suburban OE seats

Quote:
Originally Posted by rjsdad View Post
So I can change out my 2nd row seat for my 1st row? My 1st row is kinda breaking down on the sides where I get in.
I have never seen a full bench 2nd row converted to 1st row.
I suppose anything is possible though.
__________________
Chris
1968 K20 Suburban
1972 K10 LWB PU
vectorit is offline   Reply With Quote
Old 02-26-2016, 08:15 AM   #11
Bigdav160
Registered User
 
Bigdav160's Avatar
 
Join Date: Apr 2011
Location: Klein Texas
Posts: 3,852
Re: 67-72 Suburban OE seats

I can only speak of my '72. The front and rear seat frames are totally different. The front bench seat is mostly rectangular tubing with real upholstery style springs.

The rear seat is made from round tubing with large square mesh wires for the foam support.

You could probably swap them but it would take fabrication (welding) to make the sliders fit.

I didn't think to take pictures when I had mine all apart.
__________________
My Classics:
'72 K20 Suburban + '65 Dodge Town Wagon
'72 Corvette Roadster +'67 Corvette Roadster
'73 Z-28 Camaro
'63 Ford SWB Uni Pickup
'50 Ford Coupe
Bigdav160 is offline   Reply With Quote
Old 02-26-2016, 12:20 PM   #12
vectorit
What?
 
vectorit's Avatar
 
Join Date: Jun 2007
Location: Southern California
Posts: 7,617
Re: 67-72 Suburban OE seats

Quote:
Originally Posted by Bigdav160 View Post
I can only speak of my '72. The front and rear seat frames are totally different. The front bench seat is mostly rectangular tubing with real upholstery style springs.

The rear seat is made from round tubing with large square mesh wires for the foam support.

You could probably swap them but it would take fabrication (welding) to make the sliders fit.

I didn't think to take pictures when I had mine all apart.
I am running 1970 seat frames that have been covered in 67-68 style, and they are different than the 67-68 from what I have noticed.
When I was rebuilding my 1st row bench that had broken springs, I found that 67-68 springs were different from the 69-70 and 71-72.
__________________
Chris
1968 K20 Suburban
1972 K10 LWB PU
vectorit is offline   Reply With Quote
Old 02-26-2016, 01:22 PM   #13
Classic Bowties
Always on the hunt...
 
Join Date: Sep 2006
Location: Portland, OR.
Posts: 5,531
Re: 67-72 Suburban OE seats

We just added some detailed 71 suburban 2nd and 3rd row (RPO A80 center and rear seat) pictures in post #10/11 of the below linked thread. Originally pulled the seats out and took the pictures for that thread but they probably could of been added here for future reference. Mel

Thread link: http://67-72chevytrucks.com/vboard/s...=1#post7500296
Classic Bowties is offline   Reply With Quote
Old 02-26-2016, 01:28 PM   #14
vectorit
What?
 
vectorit's Avatar
 
Join Date: Jun 2007
Location: Southern California
Posts: 7,617
Re: 67-72 Suburban OE seats

Quote:
Originally Posted by Classic Bowties View Post
We just added some detailed 71 suburban 2nd and 3rd row (RPO A80 center and rear seat) pictures in post #10/11 of the below linked thread. Originally pulled the seats out and took the pictures for that thread but they probably could of been added here for future reference. Mel

Thread link: http://67-72chevytrucks.com/vboard/s...=1#post7500296
Thank you very much Mel, this is exactly what this thread is for.
__________________
Chris
1968 K20 Suburban
1972 K10 LWB PU
vectorit is offline   Reply With Quote
Old 03-10-2016, 11:19 PM   #15
sbrban
Registered User
 
Join Date: Sep 2002
Location: Iowa
Posts: 236
Re: 67-72 Suburban OE seats

Seat height is different between 1st and 2nd row seats as well.
__________________
you never have too many suburbans....
sbrban is offline   Reply With Quote
Old 05-03-2016, 03:06 PM   #16
magicoolbus
Registered User
 
magicoolbus's Avatar
 
Join Date: Jul 2010
Location: Mesa, AZ
Posts: 513
Re: 67-72 Suburban OE seats

Nice work Chris. Often a confusing topic.
__________________
JB from AZ
1969 Chevy Sub K10
1957 Chevy 3200
1962 VW Beetle
1957 Willys CJ5
magicoolbus is offline   Reply With Quote
Old 05-08-2016, 01:00 PM   #17
RedRoad
Registered User
 
RedRoad's Avatar
 
Join Date: Jan 2015
Location: Los Angeles California
Posts: 927
Re: 67-72 Suburban OE seats

Not sure if you want to include this question in this suburban specific thread, if not go ahead and make its own topic.

I finally found my set of utility buckets but was wondering what the difference might be between the panel version vs. the blazer version. Any differences in earlier ones from 60s era?

I know there is a difference between the backing plates where 64(?) and earlier had two vertical lines and 65 up had tic tac toe pattern.

Here are some pics of the ones I have and know they will not work in a 60s suburban due to difference in floor compared to a panel. They may work in the second row with a little work but have not tried it.

Any info appreciated.

Thanks
Attached Images
    
RedRoad is offline   Reply With Quote
Old 07-29-2016, 11:39 PM   #18
SIXTY9CST
Registered User
 
Join Date: Aug 2011
Location: Fairfield,Ca.
Posts: 27
Re: 67-72 Suburban OE seats

Hey guys,

I have a 1968 Suburban C10. I didn't come with a third row and it did come with a full sized second row.

My question is: Will the full width second row brackets work with a third row suburban seat or a blazer back seat to make it into a 2nd row short seat?

Thanks
SIXTY9CST is offline   Reply With Quote
Old 07-30-2016, 10:16 AM   #19
vectorit
What?
 
vectorit's Avatar
 
Join Date: Jun 2007
Location: Southern California
Posts: 7,617
Re: 67-72 Suburban OE seats

No, the 2nd and 3rd bench brackets are different.
__________________
Chris
1968 K20 Suburban
1972 K10 LWB PU
vectorit is offline   Reply With Quote
Old 10-08-2016, 05:34 PM   #20
04ls1gto
Registered User
 
Join Date: Aug 2014
Location: Portsmouth ri
Posts: 363
Re: 67-72 Suburban OE seats

I just picked up a 71 c10 suburban. What I believe is the 3rd row seat was not bolted down. First question is what size bolts are they supposed to be? Also are there some sort of hold downs for the front of the seat?
04ls1gto is offline   Reply With Quote
Old 10-08-2016, 06:19 PM   #21
WannaBe68
Registered User
 
WannaBe68's Avatar
 
Join Date: Jun 2016
Location: Texas!
Posts: 430
Re: 67-72 Suburban OE seats

I hadn't noticed this tread before until 04ls1gto posted - thanks! I think this is the right spot for my question.

The factory seat cover for my 3rd row bench was removed and accidentally thrown away Cars Inc says they have the original materials for these seats and can make reproductions...including having the irons to make the scroll marks in the vinyl. (Joe Zidzik at Cars Inc is who I have been emailing with)

My question is - I have to mail the front and 2nd row seat covers to Cars Inc before they can make the reproduction covers. If Cars Inc makes 2 of the same covers from the one original pattern of my 2nd row seat I send them...will that extra cover fit the 3rd row? In other words - are the 3rd and 2nd row bench seats the same? My 2nd and 3rd row seats both measure about 50" wide...

Thanks!

Last edited by WannaBe68; 10-08-2016 at 06:25 PM.
WannaBe68 is offline   Reply With Quote
Old 11-12-2016, 08:28 PM   #22
LuckyScott
Registered User
 
LuckyScott's Avatar
 
Join Date: Jun 2010
Location: Anaheim, Calif.
Posts: 361
Re: 67-72 Suburban OE seats

"My question is: Will the full width second row brackets work with a third row suburban seat or a blazer back seat to make it into a 2nd row short seat?"

I just got done measuring the brackets. It looks like the full width second seat brackets may fit a blazer seat and might be able to be used for the second seat.
The third seat uses different brackets, of course.

If I am wrong, please go ahead and correct me, as I have not done the install yet.
I bought a second row seat and it did not fit. It is the same width as a regular second seat. So, I as still looking for a second seat. I have a third seat installed, but just tried to install the narrow second seat and found out it is not a narrow seat.
LuckyScott is offline   Reply With Quote
Old 01-25-2017, 10:59 PM   #23
Jens Jimmy
Account Suspended
 
Join Date: Dec 2016
Location: Springdale, AR
Posts: 834
Re: 67-72 Suburban OE seats

The second and third row are different. The second row is shorter, to allow a passenger to get in the third (back) door and get to the rear or third seat. The third seat is longer. I hope that helps
Jens Jimmy is offline   Reply With Quote
Old 01-25-2017, 11:39 PM   #24
WannaBe68
Registered User
 
WannaBe68's Avatar
 
Join Date: Jun 2016
Location: Texas!
Posts: 430
Re: 67-72 Suburban OE seats

Quote:
Originally Posted by Jens Jimmy View Post
The second and third row are different. The second row is shorter, to allow a passenger to get in the third (back) door and get to the rear or third seat. The third seat is longer. I hope that helps
Are you sure about this? Both my 2nd row and the 3rd row seats both measured at about 50". 2nd row is off center, but the 3rd row fits between the wheel wells- Hers's a rough drawing -
Attached Images
File Type: pdf 2016_07_29_13_43_21.pdf (9.1 KB, 537 views)
WannaBe68 is offline   Reply With Quote
Old 09-19-2019, 07:17 PM   #25
adzints7
Junior Member
 
Join Date: Mar 2015
Location: San Clemente, CA
Posts: 86
Re: 67-72 Suburban OE seats

My apologies if this is covered, I scanned and could not find the answer directly: will a truck bench seat fit work for the front bench in a 1972 suburban? I understand the upholstery will not cover the back, but is the rest the same? Will I need to find suburban brackets and slides or did the truck and suburban use the same? I have swivel bucket seats out of a Monte Carlo and I am thinking of using those as a second or third row and have them turn inwards...but I need to find a bench for the front!
adzints7 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:36 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com