|
04-21-2013, 06:12 PM
|
#1 |
|
All around good guy
Join Date: May 2009
Location: Pendleton Oregon
Posts: 131
|
Heater Core Question
Swapping out an older heater core with a new efficient one. For those who swapped them out before what did you use to secure the heater core to the heater unit? The newer design does not work with the older mounts.
|
|
|
|
04-21-2013, 07:41 PM
|
#2 |
|
What?
Join Date: Jun 2007
Location: Southern California
Posts: 7,617
|
Re: Heater Core Question
I just took some metal banding and bent it to fit, then drilled the mounting holes in the band. (I used the banding that is used for heavy freight packing).
__________________
Chris 1968 K20 Suburban 1972 K10 LWB PU |
|
|
|
|
04-21-2013, 08:20 PM
|
#3 |
|
All around good guy
Join Date: May 2009
Location: Pendleton Oregon
Posts: 131
|
Re: Heater Core Question
Thanks Chris, I figured I was going to have to fab a solution.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
