The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The pre 1947 Chevrolet & GMC Truck Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-17-2019, 04:55 PM   #1
inked5150
Registered User
 
Join Date: Jun 2017
Location: Allen
Posts: 2
47 on s10 frame wheel backspacing/offset question??

hello all this is my first post, hoping to get some info on what offset and back spacing i need for my build

i have a 2wd single cab long bed s10 with a 6 link set up in the bag

im going to run a 20x8 or 20x9 in the front and a 20x11 or 20x12 in the rear
has anyone else used a simular set up?

rear end measures 54.5 inch from mounting surface to mounting surface

front is a michigan metal works A arm set up with +2 with 14 corvette c7 rotors
measures 59.5 mounting surface to mounting surface

does anyone know the inner fender to inner fender measurement on the front and back of the 47-53?


thanks in advance for any help.

ill post some pics as soon as i figure out how lol
inked5150 is offline   Reply With Quote
Old 05-18-2019, 12:48 AM   #2
joedoh
Senior Member
 
joedoh's Avatar
 
Join Date: May 2007
Location: Doodah Kansas
Posts: 7,746
Re: 47 on s10 frame wheel backspacing/offset question??

welcome.

1. you are in the pre 47 forum. you will want to post in the 47-59 forum going forward. http://67-72chevytrucks.com/vboard/f...splay.php?f=13

if you post a project thread, please be sure to do it in the 47-59 "project and build" section and not the 47-59 main forum

http://67-72chevytrucks.com/vboard/f...play.php?f=205

2. I used 20x8 and 20x9 on my last AD S10 swap. in the front I used 20x8 with 4 inch backspace, in the back I used 20x9, these are the offsets I ordered.



this is what it looked like



in the back I could have gone another inch wider on the rim with the same 3.5 backspace. the front also had good clearance but I wasnt bagged and needed turning ability with tucked wheels.

that is important because with the 4" wider track width, if you ordered the same 4" backspace on 8" wide, you would need to lift the truck for the wheels to clear the fenders in order to turn sharply. if you wanted it to look like mine, you would need that extra two inches back, so that would be a 6" backspace 8" wide wheel on the front.
Attached Images
 
__________________
the mass of men live lives of quiet desperation


if there is a problem, I can have it.

new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393
joedoh is offline   Reply With Quote
Old 05-27-2019, 01:47 PM   #3
inked5150
Registered User
 
Join Date: Jun 2017
Location: Allen
Posts: 2
Re: 47 on s10 frame wheel backspacing/offset question??

oh oops defiantly a noob mistake. thanks for the reply
should i move this thread to there?
inked5150 is offline   Reply With Quote
Old 05-27-2019, 02:18 PM   #4
joedoh
Senior Member
 
joedoh's Avatar
 
Join Date: May 2007
Location: Doodah Kansas
Posts: 7,746
Re: 47 on s10 frame wheel backspacing/offset question??

Quote:
Originally Posted by inked5150 View Post
oh oops defiantly a noob mistake. thanks for the reply
should i move this thread to there?
i dont think mods actually move threads, so just post over there for anything else!
__________________
the mass of men live lives of quiet desperation


if there is a problem, I can have it.

new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393
joedoh is offline   Reply With Quote
Old 06-04-2019, 07:18 PM   #5
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,242
Re: 47 on s10 frame wheel backspacing/offset question??

Joe is one of the most knowledgeable and common sense S-10 swap guy around. Follow what he says. That especially goes with the big rims
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:51 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com