detent cable connection in trany? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

WORNBRAKES · 03-22-2003, 02:17 PM

How does the cable rod hook to valve inside the pan? The rod came out with the cable when I was changing it. I pulled the pan, but I am not finding an eye or hole for the rod to go into.
Does anyone have an ilistration of how the rod hooks up? My manuals dont cover it.
Thanks,
Mario

WORNBRAKES · 03-22-2003, 03:21 PM

Oh yea,
It is a 350 trany with mech kickdown.

bigjimzlll · 03-22-2003, 06:27 PM

its a pain in the butt...theres a hole in the tranny part that the s hooky thing on the detent slides in...

WORNBRAKES · 03-22-2003, 09:13 PM

I found it. Bill, you are right. It is a big pain in the but. The tab with the hole for the detent rod was broken off. After I had it jimi riged ( the wrong way) and the pan and x-member installed, I found the broken tab in the bottom of my oil pail.
Needless to say, I need to find one and tear it all apart again.
Does anyone have a core laying around that they can rob one off of?
Thanks,
Mario

Longhorn Man · 03-23-2003, 01:51 AM

I went through this a month ago...real PITA.

03-22-2003, 02:17 PM	#1
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	detent cable connection in trany? How does the cable rod hook to valve inside the pan? The rod came out with the cable when I was changing it. I pulled the pan, but I am not finding an eye or hole for the rod to go into. Does anyone have an ilistration of how the rod hooks up? My manuals dont cover it. Thanks, Mario __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

03-22-2003, 03:21 PM	#2
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Oh yea, It is a 350 trany with mech kickdown. __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

03-22-2003, 06:27 PM	#3
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	its a pain in the butt...theres a hole in the tranny part that the s hooky thing on the detent slides in... __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

03-22-2003, 09:13 PM	#4
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	I found it. Bill, you are right. It is a big pain in the but. The tab with the hole for the detent rod was broken off. After I had it jimi riged ( the wrong way) and the pan and x-member installed, I found the broken tab in the bottom of my oil pail. Needless to say, I need to find one and tear it all apart again. Does anyone have a core laying around that they can rob one off of? Thanks, Mario __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

03-23-2003, 01:51 AM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	I went through this a month ago...real PITA.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.