Are 3927019 the correct sway bar bushings? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ghackett1** · 05-13-2023, 01:57 AM

For a stock 68 C10 pickup? My front bushings are shot and need replacing.

H A M M · 05-13-2023, 08:19 AM

My GM catalog says its good back to at least '73, but part interchange on both Napa and O'Reilly show that it is good back to '68.

**ghackett1** · 05-13-2023, 10:57 AM

Ok copy, thank you.
I’m digging and seem to see a set for .081 and a set for 1.08 so I’m still a bit uncertain.

H A M M · 05-13-2023, 11:54 AM

GM shows them as a 1" ID, 2" high. That part number still comes up in the GM electronic catalog.

**ghackett1** · 05-13-2023, 02:14 PM

Thx, yep I ordered an energy suspension urethane set complete with brackets, I got the 1 1/16”, they should be fine and better than the factory rubber.

05-13-2023, 01:57 AM	#1
ghackett1 68 C10 Longbed Join Date: Sep 2006 Location: Naples, Florida Posts: 520	Are 3927019 the correct sway bar bushings? For a stock 68 C10 pickup? My front bushings are shot and need replacing. Last edited by ghackett1; 05-13-2023 at 02:42 AM.

05-13-2023, 08:19 AM	#2
H A M M Registered User Join Date: Jul 2019 Location: Green Bay, WI Posts: 7	Re: Are 3927019 the correct sway bar bushings? My GM catalog says its good back to at least '73, but part interchange on both Napa and O'Reilly show that it is good back to '68. __________________ -Scott "If it jams, force it. If it breaks, it needed replacing anyways." Build log coming........eventually.

05-13-2023, 10:57 AM	#3
ghackett1 68 C10 Longbed Join Date: Sep 2006 Location: Naples, Florida Posts: 520	Re: Are 3927019 the correct sway bar bushings? Ok copy, thank you. I’m digging and seem to see a set for .081 and a set for 1.08 so I’m still a bit uncertain.

05-13-2023, 11:54 AM	#4
H A M M Registered User Join Date: Jul 2019 Location: Green Bay, WI Posts: 7	Re: Are 3927019 the correct sway bar bushings? GM shows them as a 1" ID, 2" high. That part number still comes up in the GM electronic catalog. __________________ -Scott "If it jams, force it. If it breaks, it needed replacing anyways." Build log coming........eventually.

05-13-2023, 02:14 PM	#5
ghackett1 68 C10 Longbed Join Date: Sep 2006 Location: Naples, Florida Posts: 520	Re: Are 3927019 the correct sway bar bushings? Thx, yep I ordered an energy suspension urethane set complete with brackets, I got the 1 1/16”, they should be fine and better than the factory rubber.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.