|
05-04-2003, 04:25 PM
|
#1 |
|
senior member
Join Date: Feb 2003
Location: fort macleod alberta
Posts: 2,770
|
Wipers?'s
if you can believe it we had snow this mornin in MAY thats not the bad part the bad part is that my wipers have never worked properly and i always had to push the knob in then they would wipe put there was no intermittent or anything there is a wire up under the dash that if imove slightly they work fine but this morning i tried to move the snow with my wipers and the wouldnt move then i went and brushed the snow and ice off them then when i tried to wipe there was nothing except for a thumping sound. now I am wondering if I possibly have burnt out the motor or what the hell anyhelp would be good thanks
__________________
69 GMC bagged |
|
|
|
05-04-2003, 11:20 PM
|
#2 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
You may have brokem a linkage or broke the internals of the motor.
|
|
|
|
|
05-04-2003, 11:36 PM
|
#3 |
|
senior member
Join Date: Feb 2003
Location: fort macleod alberta
Posts: 2,770
|
now they work but very slowly
__________________
69 GMC bagged |
|
|
|
|
05-05-2003, 12:13 AM
|
#4 |
|
Registered User
Join Date: Feb 2003
Location: Mesquite, Tx
Posts: 396
|
i had a similar problem when we had our last ice storm. look in the cowl panel out side the truck. i had a chunk of ice on the crank of the wiper motor. it would not move until i grabbed the wiper and started pushing it manually. then it would only move slow. after seeing what the problem was i just got some warm water and dumped it in the cowl and once the ice started to melt, the wipers started working again.
__________________
GM 330HP/350, Magnuson 122HH, Tremec TKO 5spd |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
