59 frame swap question... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

texascowboy593 · 07-09-2006, 12:55 AM

After reviewing our options, me and my build buddy think a newer frame is in order. The question is, which frame is the best for a 59 swb stepside?

1) S-10 pickup frame
2) S-10 Blazer frame
3) Full size Blazer frame

All the above would be mid 80's. Were not too sure about our welding abilities for putting in a 79ish camaro subframe like ive seen done before so the frame swap is our best bet... Any input will be appreciated! Thx, J

texascowboy593 · 07-09-2006, 06:44 PM

Frame swap has been answered. I picked up a 81-82 blazer frame (Ithink that's what he said) for $150 today. It had a 59 apache on it at one time. I guess my next step is to start the "official build thread"...

Jebb1978 · 07-09-2006, 07:14 PM

Cool! You weren't messing around I guess.

5Mike7 · 07-10-2006, 07:30 PM

Hey,

If you get a chance, could you measure outside to outside on your Blazer frame, just infront or behind the motor mounts?

Thanks

dwcsr · 07-10-2006, 08:13 PM

The frame tapers at that point. It should be close to 30.5" rearward of the mount tapering to 28.5" in front of the mount with 29.5" across the motor mounts. I put a 75 C10 IFS into my 58 thats the only reason I know.

Igotachevyor2 · 07-10-2006, 09:12 PM

so whats the good and bad about doing this swap i measured my blazer wheel base and remember it being shorter than my 58 ? how much trouble is putting the 59 body parts on this frame?

texascowboy593 · 07-11-2006, 04:37 PM

I hope to have answers soon. I'm not the expert on swaps but my buddy putting it together knows how. Im going up there tomm. (an hour away) and Ill see what I can get out of him as far as answers...

Igotachevyor2 · 07-12-2006, 08:38 PM

cool thanks i had talked my self out of the swap since i couldnt find any info on it but if you know something i am listening and may rethink the idea looking forward to what your friend has to say

07-09-2006, 12:55 AM	#1
texascowboy593 Registered User Join Date: Dec 2004 Location: Southeast Tx Posts: 1,302	59 frame swap question... After reviewing our options, me and my build buddy think a newer frame is in order. The question is, which frame is the best for a 59 swb stepside? 1) S-10 pickup frame 2) S-10 Blazer frame 3) Full size Blazer frame All the above would be mid 80's. Were not too sure about our welding abilities for putting in a 79ish camaro subframe like ive seen done before so the frame swap is our best bet... Any input will be appreciated! Thx, J __________________ "The rays of light thru the Shiner Bock bottle make me wanna turn the key and put down the throttle...and get lost down 35" - Jason Boland www.YouTube.com/user/593Films - Watch My Videos! 1977 Silverado K10 2014 Dodge Durango (Wife-mobile) 2008 Dodge Ram Lone Star Edition (Daily driver)

07-09-2006, 06:44 PM	#2
texascowboy593 Registered User Join Date: Dec 2004 Location: Southeast Tx Posts: 1,302	Re: 59 frame swap question... Frame swap has been answered. I picked up a 81-82 blazer frame (Ithink that's what he said) for $150 today. It had a 59 apache on it at one time. I guess my next step is to start the "official build thread"... Attached Images __________________ "The rays of light thru the Shiner Bock bottle make me wanna turn the key and put down the throttle...and get lost down 35" - Jason Boland www.YouTube.com/user/593Films - Watch My Videos! 1977 Silverado K10 2014 Dodge Durango (Wife-mobile) 2008 Dodge Ram Lone Star Edition (Daily driver)

07-09-2006, 07:14 PM	#3
Jebb1978 Senior Member Join Date: Aug 2005 Location: Mesa,Az Posts: 3,713	Re: 59 frame swap question... Cool! You weren't messing around I guess. __________________ 1959 GMC project

07-10-2006, 07:30 PM	#4
5Mike7 Senior Member Join Date: Apr 2005 Location: Oakdale,Ca Posts: 283	Re: 59 frame swap question... Hey, If you get a chance, could you measure outside to outside on your Blazer frame, just infront or behind the motor mounts? Thanks

07-10-2006, 08:13 PM	#5
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,134	Re: 59 frame swap question... The frame tapers at that point. It should be close to 30.5" rearward of the mount tapering to 28.5" in front of the mount with 29.5" across the motor mounts. I put a 75 C10 IFS into my 58 thats the only reason I know.

07-10-2006, 09:12 PM	#6
Igotachevyor2 Apache Club Join Date: Jan 2006 Location: Goodlettsville,Tn. Posts: 1,294	Re: 59 frame swap question... so whats the good and bad about doing this swap i measured my blazer wheel base and remember it being shorter than my 58 ? how much trouble is putting the 59 body parts on this frame? __________________ 58 CHEVY APACHE I 74 CHEVY C-10 I 78 K-10 donor truck I 89 SONOMA My Trucks Apache Sitting Idle MySpace Project Dad's Truck (74 C-10 to K-10 conversion) .

07-11-2006, 04:37 PM	#7
texascowboy593 Registered User Join Date: Dec 2004 Location: Southeast Tx Posts: 1,302	Re: 59 frame swap question... I hope to have answers soon. I'm not the expert on swaps but my buddy putting it together knows how. Im going up there tomm. (an hour away) and Ill see what I can get out of him as far as answers... __________________ "The rays of light thru the Shiner Bock bottle make me wanna turn the key and put down the throttle...and get lost down 35" - Jason Boland www.YouTube.com/user/593Films - Watch My Videos! 1977 Silverado K10 2014 Dodge Durango (Wife-mobile) 2008 Dodge Ram Lone Star Edition (Daily driver)

07-12-2006, 08:38 PM	#8
Igotachevyor2 Apache Club Join Date: Jan 2006 Location: Goodlettsville,Tn. Posts: 1,294	Re: 59 frame swap question... cool thanks i had talked my self out of the swap since i couldnt find any info on it but if you know something i am listening and may rethink the idea looking forward to what your friend has to say __________________ 58 CHEVY APACHE I 74 CHEVY C-10 I 78 K-10 donor truck I 89 SONOMA My Trucks Apache Sitting Idle MySpace Project Dad's Truck (74 C-10 to K-10 conversion) .



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.