The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board > 67-72 Chevrolet & GMC Pickups Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-30-2011, 05:28 PM   #1
Graham57a
Registered User
 
Graham57a's Avatar
 
Join Date: Aug 2010
Location: Asheville, North Carolina
Posts: 1,838
72 Cheyenne Super Plain Jane

I have been working on this project for a while. I have been meaning to get around to posting a thread on my build but haven't had the time. I have had this truck for about 7 years now. I am only 17 years old so I haven't had the ability to do anything on this project until the past year. I know that it is originally a 1970 GMC, not a 72 Cheyenne Super. I personally think that the old GMC's look like Dodges and I was born and raised a Chevy guy so I will be converting the front end and a few other small things to make it a 72 Cheyenne Super. Here are some pictures of the truck from when I first began to where it is now
Attached Images
     

Last edited by Graham57a; 04-30-2011 at 07:24 PM.
Graham57a is offline   Reply With Quote
Old 04-30-2011, 05:37 PM   #2
Graham57a
Registered User
 
Graham57a's Avatar
 
Join Date: Aug 2010
Location: Asheville, North Carolina
Posts: 1,838
Re: 72 Cheyenne Super First Project

Here is some pictures of the interior before and after I took everything out of it. I found it surprisingly simple to take one of these trucks apart. I had it down to a frame, motor, trans, and rear end in about a day.
Attached Images
    
Graham57a is offline   Reply With Quote
Old 04-30-2011, 05:45 PM   #3
Graham57a
Registered User
 
Graham57a's Avatar
 
Join Date: Aug 2010
Location: Asheville, North Carolina
Posts: 1,838
Re: 72 Cheyenne Super First Project

Sent the cab, the bed, and hood to the media blaster to get stripped. Pulled the motor and trans out for a rattle can restoration, and started sand blasting the frame. At first I was going to use a little sand blaster and strip the frame and just rattle can it but I decided that I would much rather get the frame powder coated and do it right so I don't have to take the hole thin apart ten years from now to redo the frame.
Attached Images
    
Graham57a is offline   Reply With Quote
Old 04-30-2011, 05:50 PM   #4
Graham57a
Registered User
 
Graham57a's Avatar
 
Join Date: Aug 2010
Location: Asheville, North Carolina
Posts: 1,838
Re: 72 Cheyenne Super First Project

Its amazing what a few cans of spray paint and some elbow grease can do
Attached Images
   

Last edited by Graham57a; 04-30-2011 at 05:52 PM.
Graham57a is offline   Reply With Quote
Old 04-30-2011, 05:57 PM   #5
Graham57a
Registered User
 
Graham57a's Avatar
 
Join Date: Aug 2010
Location: Asheville, North Carolina
Posts: 1,838
Re: 72 Cheyenne Super First Project

Replaced the cab corners and rocker panels. I recently did some patch work on the floor board and just finished the C notch on the frame but I don't have any picture yet
Attached Images
    
Graham57a is offline   Reply With Quote
Old 04-30-2011, 07:04 PM   #6
Graham57a
Registered User
 
Graham57a's Avatar
 
Join Date: Aug 2010
Location: Asheville, North Carolina
Posts: 1,838
Re: 72 Cheyenne Super First Project

Found a picture of the truck before anything was done to it
Attached Images
 
Graham57a is offline   Reply With Quote
Old 05-01-2011, 12:57 PM   #7
FRENCHBLUE72
PROJECT 7DEUCE
 
FRENCHBLUE72's Avatar
 
Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,589
Re: 72 Cheyenne Super First Project

Nice work. I take it you guys blasted the cab or did you use some sort of paint stripper?
__________________
GO BIG GREEN GO DUCKS



MEMBER #6377

72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free.

Project "7DEUCE"

check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665



Tim Powell..R.I.P EastSideLowlife..... R.I.P..
FRENCHBLUE72 is offline   Reply With Quote
Old 05-01-2011, 01:06 PM   #8
Graham57a
Registered User
 
Graham57a's Avatar
 
Join Date: Aug 2010
Location: Asheville, North Carolina
Posts: 1,838
Re: 72 Cheyenne Super First Project

Thank you, we had the cab media blasted along with the rest of the body. Its way easier to just have the hole thing blasted rather then dealing with paint stripper. Plus there is a media blaster about five shops down from where I am at.
Graham57a is offline   Reply With Quote
Old 05-01-2011, 02:27 PM   #9
red69ss
Burnouts are therapeutic
 
red69ss's Avatar
 
Join Date: Jun 2007
Location: lancaster, south carolina
Posts: 851
Re: 72 Cheyenne Super First Project

nice start keep up the progress , I'm the guy that bought those fenders from you.
__________________
1969 CHEVELLE SS
1972 C10 ALMOST DAILY DRIVER
1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE)
1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR)

"My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield

"The difference between genius and stupidity is that genius has its limits." - Einstein
red69ss is offline   Reply With Quote
Old 05-01-2011, 07:03 PM   #10
Graham57a
Registered User
 
Graham57a's Avatar
 
Join Date: Aug 2010
Location: Asheville, North Carolina
Posts: 1,838
Re: 72 Cheyenne Super First Project

Oh sweet, hope those worked out for you. I still have that grill if anyone is interested.
Graham57a is offline   Reply With Quote
Old 05-01-2011, 08:29 PM   #11
Graham57a
Registered User
 
Graham57a's Avatar
 
Join Date: Aug 2010
Location: Asheville, North Carolina
Posts: 1,838
Re: 72 Cheyenne Super First Project

Does anyone have a radiator support for a 1972 Chevy that they would be willing to part with? I also need a really clean grill and grill surround. Post a reply if you have anything or know of anyone who does. Thank you

Last edited by Graham57a; 05-01-2011 at 08:30 PM.
Graham57a is offline   Reply With Quote
Old 05-01-2011, 08:40 PM   #12
FRENCHBLUE72
PROJECT 7DEUCE
 
FRENCHBLUE72's Avatar
 
Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,589
Re: 72 Cheyenne Super First Project

I have 2 of them but Im sure shipping would cost a fortune.
__________________
GO BIG GREEN GO DUCKS



MEMBER #6377

72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free.

Project "7DEUCE"

check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665



Tim Powell..R.I.P EastSideLowlife..... R.I.P..
FRENCHBLUE72 is offline   Reply With Quote
Old 05-01-2011, 09:29 PM   #13
Graham57a
Registered User
 
Graham57a's Avatar
 
Join Date: Aug 2010
Location: Asheville, North Carolina
Posts: 1,838
Re: 72 Cheyenne Super First Project

Yea, I found a few radiator supports out here but everything is rusted out. And all of the grill surrounds that I have seen are dented and banged up. I really don't want to have to buy a reproduction rad support but I might just get the grill
Graham57a is offline   Reply With Quote
Old 05-01-2011, 09:40 PM   #14
71swb4x4
Senior Member
 
71swb4x4's Avatar
 
Join Date: Nov 2003
Location: Brookings, SD
Posts: 10,497
Re: 72 Cheyenne Super First Project

I am sure you already know this, but those fenders will not work with 69-72 Chevy grills. I see you mention the core support but not the fenders, but you may already have the fenders you need.
Just thought I would point it out in case you didn't already know.
__________________
Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.
71swb4x4 is offline   Reply With Quote
Old 05-01-2011, 09:56 PM   #15
Graham57a
Registered User
 
Graham57a's Avatar
 
Join Date: Aug 2010
Location: Asheville, North Carolina
Posts: 1,838
Re: 72 Cheyenne Super First Project

Yea I already sold the old fenders and replaced them with the correct kind. Thank you tho, that would be a crappy mistake to make. Haha
Posted via Mobile Device
Graham57a is offline   Reply With Quote
Old 05-02-2011, 12:18 PM   #16
gcburdic
Restoration Virgin!
 
gcburdic's Avatar
 
Join Date: Jan 2008
Location: Huntersville, NC
Posts: 8,298
Re: 72 Cheyenne Super First Project

Hey Graham....I actually came to the shop where your truck was before it went to media blasters and dealt with your Dad last year...I bought the GMC rad support and told red69ss about those fenders....glad to see ya on the boards...I live just south of ya in Cornelius....let me know if you need any help....I'd be willing to head up and turn some wrenches with you and your Dad
__________________
Geoff with a G
1968 Chevy C10 SWB The Mistress

1972 Custom Deluxe C20 Suburban A Suburban Named Isabella

1966 Ford Mustang Mama's High School Graduation Present
gcburdic is offline   Reply With Quote
Old 05-02-2011, 02:14 PM   #17
Graham57a
Registered User
 
Graham57a's Avatar
 
Join Date: Aug 2010
Location: Asheville, North Carolina
Posts: 1,838
Re: 72 Cheyenne Super First Project

Awesome!! Thanks for checking out my build. I will let you know if I need any help
Graham57a is offline   Reply With Quote
Old 05-02-2011, 08:58 PM   #18
Graham57a
Registered User
 
Graham57a's Avatar
 
Join Date: Aug 2010
Location: Asheville, North Carolina
Posts: 1,838
Re: 72 Cheyenne Super First Project

Took some more pictures of the project today. All of the body is sitting in the paint booth at the shop waiting to get painted and the c notch in the frame is almost done. Ordered some parts from the truck shop today and got a core support from Jerry in Tennessee, he is a great guy to deal with.
Attached Images
     
Graham57a is offline   Reply With Quote
Old 05-02-2011, 09:01 PM   #19
Graham57a
Registered User
 
Graham57a's Avatar
 
Join Date: Aug 2010
Location: Asheville, North Carolina
Posts: 1,838
Re: 72 Cheyenne Super First Project

Some more pictures
Attached Images
     

Last edited by Graham57a; 05-02-2011 at 09:08 PM.
Graham57a is offline   Reply With Quote
Old 05-02-2011, 09:42 PM   #20
Graham57a
Registered User
 
Graham57a's Avatar
 
Join Date: Aug 2010
Location: Asheville, North Carolina
Posts: 1,838
Re: 72 Cheyenne Super First Project

Some parts I had laying around in my closet. Rebuilt tilt column, original door panels with repro inserts, original visors, houndstooth seat cover, and a ton of little small things.
Attached Images
    
Graham57a is offline   Reply With Quote
Old 05-02-2011, 10:12 PM   #21
Graham57a
Registered User
 
Graham57a's Avatar
 
Join Date: Aug 2010
Location: Asheville, North Carolina
Posts: 1,838
Re: 72 Cheyenne Super First Project

Forgot about these under my bed
Attached Images
  
Graham57a is offline   Reply With Quote
Old 05-02-2011, 11:47 PM   #22
VA72C10
VA72C10
 
VA72C10's Avatar
 
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
Re: 72 Cheyenne Super First Project

You've gathered some nice parts for this build!!!

Body and frame are looking good too!
__________________
Looking for a 67-72 swb or blazer project in or around VA.
VA72C10 is offline   Reply With Quote
Old 05-03-2011, 09:02 AM   #23
gcburdic
Restoration Virgin!
 
gcburdic's Avatar
 
Join Date: Jan 2008
Location: Huntersville, NC
Posts: 8,298
Re: 72 Cheyenne Super First Project

Isn't cool when you find stuff you bought and stashed away for your project
__________________
Geoff with a G
1968 Chevy C10 SWB The Mistress

1972 Custom Deluxe C20 Suburban A Suburban Named Isabella

1966 Ford Mustang Mama's High School Graduation Present
gcburdic is offline   Reply With Quote
Old 05-03-2011, 09:07 AM   #24
Graham57a
Registered User
 
Graham57a's Avatar
 
Join Date: Aug 2010
Location: Asheville, North Carolina
Posts: 1,838
Re: 72 Cheyenne Super First Project

Thank you. When I was about 8 years old, my dad ran an automotive repair shop and he worked on a truck for a guy named Kevin Bradley who owns a custom hot rod shop in rio dell, california called kreations. I remember watching my dad work on that truck, a 72 c-10 painted copper orange, slammed and completely custom, and telling my dad that I wanted a truck like that when I grew up. Ever since then, my dad has been buying parts trucks, gathering little things here and there, and getting me things to make my build easier. My grandpa also owns a wrecking yard in northern california and he is a hoarder when it comes to early chevy parts.
Graham57a is offline   Reply With Quote
Old 05-03-2011, 09:09 AM   #25
Graham57a
Registered User
 
Graham57a's Avatar
 
Join Date: Aug 2010
Location: Asheville, North Carolina
Posts: 1,838
Re: 72 Cheyenne Super First Project

Quote:
Originally Posted by gcburdic View Post
Isn't cool when you find stuff you bought and stashed away for your project
I love it, haha. My dad is a camaro guy and my basement is filled with NOS parts from an old chevy dealership that we bought out the inventory of. So my entire house is full of parts of every shape and size for everything you can think of. I find new parts all the time
Graham57a is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:48 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com