In need of - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**dennislbrooks** · 07-24-2005, 04:47 PM

a pair of 71-87 disc backing plates --- ship to zip 75022

tomatocity · 07-24-2005, 05:45 PM

I was looking for the same and discovererd they ar enot cheap and most of them at junk yards are bent because they were set down without wheels. Let me know what you find. Tim

Jakes-66-K10 · 07-24-2005, 07:18 PM

I was looking for some a while back, I know American Classic and Early Classic both sell new dust shields. I was fortunate to find some in a junkyard that were in decent shape though.

**dennislbrooks** · 07-24-2005, 07:56 PM

but had to fish for them anyway. Someone posted that GM parts still sells them for the 73-87 at $15 bucks a piece. I will check tomorrow but sounds too good to be true. I am headed for the Fredericksburg, TX swap meet next weekend and will keep an eye open. I also pick up cheap 73-87 spindles when I find them. If I could figure out how to make thebacking plates I would but probably would be cheaper at $30 a piece. haha

**dennislbrooks** · 07-25-2005, 11:36 AM

The GM part # is 1450493738 73-87 2wd at a prices of $42.33 each -- makes the $29.99 look better from aftermarket.

flip66 · 07-25-2005, 11:53 AM

might be able to find a pair at pick a part on old 75 in dallas they have a bunch of 73-87 and I mean a bunch. They keep them off the ground so most of the time the plats are good.

unforgiven_shame · 07-25-2005, 12:13 PM

I have the disc brake set up, spindle,plates,calipers, disc off a 72 model already off the truck if that helps anyone.. 100.00 for it all

thejoker · 07-25-2005, 12:30 PM

I have a 79 I'm parting out. I'll look this evening and see the condition. If there good how does $15 plus ride sound? If I have them I'll get you a pic to see them before deciding.

**dennislbrooks** · 07-25-2005, 02:05 PM

PM me if you have them

07-24-2005, 04:47 PM	#1
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,764	In need of a pair of 71-87 disc backing plates --- ship to zip 75022

07-24-2005, 05:45 PM	#2
tomatocity Registered User Join Date: Jun 2005 Location: Sacramento CA Posts: 1,255	I was looking for the same and discovererd they ar enot cheap and most of them at junk yards are bent because they were set down without wheels. Let me know what you find. Tim __________________ Got bored, sold everthing. Got bored, looking for a 1960-66 C-10. Want to build my last truck.

07-24-2005, 07:56 PM	#4
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,764	yea I know it but had to fish for them anyway. Someone posted that GM parts still sells them for the 73-87 at $15 bucks a piece. I will check tomorrow but sounds too good to be true. I am headed for the Fredericksburg, TX swap meet next weekend and will keep an eye open. I also pick up cheap 73-87 spindles when I find them. If I could figure out how to make thebacking plates I would but probably would be cheaper at $30 a piece. haha

07-25-2005, 11:36 AM	#5
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,764	ouch---vendors do not look The GM part # is 1450493738 73-87 2wd at a prices of $42.33 each -- makes the $29.99 look better from aftermarket.

07-25-2005, 11:53 AM	#6
flip66 Registered User Join Date: Jan 2004 Location: Garland TX Dallas area Posts: 658	might be able to find a pair at pick a part on old 75 in dallas they have a bunch of 73-87 and I mean a bunch. They keep them off the ground so most of the time the plats are good. __________________ 1998 Pontiac Grad Prix GTP 1969 C10 396 TH400 3.08 posi Last edited by flip66; 07-25-2005 at 11:59 AM.

07-24-2005, 07:18 PM	#3
Jakes-66-K10 Registered User Join Date: Aug 2004 Location: Idaho Posts: 640	I was looking for some a while back, I know American Classic and Early Classic both sell new dust shields. I was fortunate to find some in a junkyard that were in decent shape though.

07-25-2005, 12:13 PM	#7
unforgiven_shame Registered User Join Date: Jun 2005 Location: hillsboro,texas Posts: 10	I have the disc brake set up, spindle,plates,calipers, disc off a 72 model already off the truck if that helps anyone.. 100.00 for it all

07-25-2005, 12:30 PM	#8
thejoker Registered User Join Date: Jun 2005 Location: Gulfport Mississippi Posts: 364	I have a 79 I'm parting out. I'll look this evening and see the condition. If there good how does $15 plus ride sound? If I have them I'll get you a pic to see them before deciding.

07-25-2005, 02:05 PM	#9
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,764	yes PM me if you have them



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.