GEN III C10 Full Air ride build - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bmfpeterson · 10-27-2010, 11:45 AM

dude whats up! you do anything on your truck lately? I haven't done Shi*...... but im going to start back up ordering parts next week carb ignition starter alternator. I want to start it by the end of the year... I say we race to start our trucks hhhhhhmmmmmmm? jk ill probably lose!

softballnrd27 · 10-30-2010, 06:39 PM

What year are your headers for? Are they for the newer trucks with the 4.8/5.3/6.0 motors or for our year?
Posted via Mobile Device

breeze85cten · 10-31-2010, 11:58 PM

Quote:

Originally Posted by bmfpeterson

dude whats up! you do anything on your truck lately? I haven't done Shi*...... but im going to start back up ordering parts next week carb ignition starter alternator. I want to start it by the end of the year... I say we race to start our trucks hhhhhhmmmmmmm? jk ill probably lose!

Hahaha I am down to race!!! Hopefully I will have mine running by december! I have been working on the harness and I built the fuse block to power the sucker and just today finished putting the harness together on the truck with the wire loom and routed it to all the sensors so just a little more and it will be cranking over!

breeze85cten · 10-31-2010, 11:59 PM

Quote:

Originally Posted by softballnrd27

What year are your headers for? Are they for the newer trucks with the 4.8/5.3/6.0 motors or for our year?
Posted via Mobile Device

The headers are for the 4.8/5.3l/6.0 they are pacesetter headers. bought them off texas speed and performance. had to do alot of frame rail notching to make them fit.

bmfpeterson · 11-01-2010, 12:54 PM

damn well I dont want to race anymore! hahahaha

breeze85cten · 11-21-2010, 03:36 PM

I finally had enough time to finish the harness and route it to all the sensors and wire loom it! The engine harness is ready and just fired her up today for the first time!!! Sounds awesome with the big cam. Of course the video doesnt do it justice. At first I couldnt get oil pressure for the life of me so I went thought it might be the pick up tube being pinched but changed it and it wasnt it then went to my last resort which was change the oil pump but after I did that it still was the same no pressure! This whole time I was turning the engine over with the starter and no spark plugs to build pressure but it wasnt enought so I ended up pooring oil down the oil sensor hole and then went to actually start it and it had oil pressure within 3 seconds!! Thank god. So all I had to do was prime it through the oils sensor hole!! Hope you guys like it.

breeze85cten · 11-21-2010, 10:36 PM

hope video works its on you tube

breeze85cten · 11-21-2010, 10:40 PM

YouTube - '85 C10 Bagged LSX

menace121978 · 11-21-2010, 10:42 PM

music to my ears!! sounds and looks great man!

breeze85cten · 11-22-2010, 11:43 PM

Thanks! I love the sound when it lopes and moves the trucks back and forth!

WillieloRidez · 11-23-2010, 11:13 AM

Lookin great man!

bmfpeterson · 11-29-2010, 01:02 PM

awesome so I guess I lose the race hahahahaha

Devillusion · 12-13-2010, 08:22 PM

very nice....

bmfpeterson · 12-14-2010, 11:25 AM

Quote:

Originally Posted by Devillusion

very nice....

I know some people in Killarney. They own the pleasant valley golf resort I believe it is near Brandon? funny

Devillusion · 12-14-2010, 11:28 AM

Quote:

Originally Posted by bmfpeterson

I know some people in Killarney. They own the pleasant valley golf resort I believe it is near Brandon? funny

What is even funnier is that I grew up in Killarney....lol. Cool. I don't know the current owners but yeah, I'm only an hour away from there now. Do you ever come up here?

bmfpeterson · 12-14-2010, 04:26 PM

Quote:

Originally Posted by Devillusion

What is even funnier is that I grew up in Killarney....lol. Cool. I don't know the current owners but yeah, I'm only an hour away from there now. Do you ever come up here?

I wish! it's been years since Ive been up. Last time I was there we took a fishing trip out of flin flon. pretty cool!
The family's name is Hall that own it really good people. Ive had some good times there on that lake. and lots of beers! lol

Devillusion · 12-14-2010, 04:34 PM

Quote:

Originally Posted by bmfpeterson

I wish! it's been years since Ive been up. Last time I was there we took a fishing trip out of flin flon. pretty cool!
The family's name is Hall that own it really good people. Ive had some good times there on that lake. and lots of beers! lol

Ya, been fishing up in Sturgeon Landing....crazy fishing up there. There are a few "Halls" from around there. Have to give me a shout if you ever come up again....at least stop by for a beer!

bmfpeterson · 12-14-2010, 07:20 PM

Quote:

Originally Posted by Devillusion

Ya, been fishing up in Sturgeon Landing....crazy fishing up there. There are a few "Halls" from around there. Have to give me a shout if you ever come up again....at least stop by for a beer!

No doubt buddy! if I head that way Im looking you up! your green truck looks pretty damn nice!

Sorry for jacking your thread matt.........

breeze85cten · 01-28-2011, 01:42 AM

Man I haven't posted on my own build thread forever! Well heres an update. I have been driving my truck breaking her in for a dyno tune which should be happening soon. Also been making sure everything is running good and it is. Ran into a weird noise coming from tranny, squealing sound, which 300 bucks later found out it was just my stupid crank case vent tubes routed wrong. Pulled tranny and had a new TC sent cause thought it might have been a spun bearing. Sucked but glad I fixed it. Runs great just needs to be tuned to get the best HP to the wheels. It still is a load of fun. I will try and get a nice break stand on here soon when I get a chance and more pics!

breeze85cten · 01-28-2011, 01:48 AM

Forgot I had some pics of my front put together, has the cowl hood which I swapped for a stock hood because I never was a fan of the cowl hood look. Love my new hood and will get some pics of it soon but suck since its purple! Paint will come soon. Also took my phantom grill and made it into a normal billet grill which is my favorite grill setup on these trucks.

breeze85cten · 01-28-2011, 01:51 AM

heres a couple

franky69c10 · 01-28-2011, 03:44 AM

Look'n good

so u did ur own harness was it hard and maybe u can help me with my harness when I get my 5.3
Posted via Mobile Device

breeze85cten · 01-28-2011, 11:10 PM

If the harness is for that black c10 I am down!! I did work my own harness but with all the help from lt1swap.com This guy has all the information you need to work your own harness if you want to save a 1000 bucks. It takes lots of time but I did it that way because my harness was cut in a couple places and to save money of course. The whole time i was worried about it not being right but it fired right up. Let me know if you have any more questions, since you in AZ that makes it easier. I was at the pavillions last weekend when barrett jackson was here too. Truck was sitting on the ground there for a couple of hours, might start taking it more.

73gmc454 · 01-29-2011, 01:00 AM

Looks great keep goin !

breeze85cten · 02-10-2011, 12:29 AM

Got the dyno on my ride finally and hit my goal! 304 horses to the wheels!!! Thats out of a baby 4.8l! Sounds mean as hell too! I will try and figure out how to post my dyno sheet. I am horrible when it comes to little crap like that. Now I am sure I can beat any rich kid rolling around in his parents mustang or charger! No offense!

10-27-2010, 11:45 AM	#51
bmfpeterson Registered User Join Date: Jul 2008 Location: Queen Creek, AZ Posts: 538	Re: GEN III C10 Full Air ride build dude whats up! you do anything on your truck lately? I haven't done Shi*...... but im going to start back up ordering parts next week carb ignition starter alternator. I want to start it by the end of the year... I say we race to start our trucks hhhhhhmmmmmmm? jk ill probably lose!

10-30-2010, 06:39 PM	#52
softballnrd27 Always a work in progress Join Date: Jun 2007 Location: Harker Heights, TX Posts: 1,599	Re: GEN III C10 Full Air ride build What year are your headers for? Are they for the newer trucks with the 4.8/5.3/6.0 motors or for our year? Posted via Mobile Device __________________ USMC Retired Never trust a man who can't laugh at his own fart! 2010 Silverado Crew Cab 73 SWB 5.3/4l80e Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=695168

11-01-2010, 12:54 PM	#55
bmfpeterson Registered User Join Date: Jul 2008 Location: Queen Creek, AZ Posts: 538	Re: GEN III C10 Full Air ride build damn well I dont want to race anymore! hahahaha

11-21-2010, 03:36 PM	#56
breeze85cten Registered User Join Date: Jul 2010 Location: Gilbert, AZ Posts: 162	Re: GEN III C10 Full Air ride build I finally had enough time to finish the harness and route it to all the sensors and wire loom it! The engine harness is ready and just fired her up today for the first time!!! Sounds awesome with the big cam. Of course the video doesnt do it justice. At first I couldnt get oil pressure for the life of me so I went thought it might be the pick up tube being pinched but changed it and it wasnt it then went to my last resort which was change the oil pump but after I did that it still was the same no pressure! This whole time I was turning the engine over with the starter and no spark plugs to build pressure but it wasnt enought so I ended up pooring oil down the oil sensor hole and then went to actually start it and it had oil pressure within 3 seconds!! Thank god. So all I had to do was prime it through the oils sensor hole!! Hope you guys like it.

11-21-2010, 10:36 PM	#57
breeze85cten Registered User Join Date: Jul 2010 Location: Gilbert, AZ Posts: 162	Re: GEN III C10 Full Air ride build hope video works its on you tube Last edited by breeze85cten; 11-21-2010 at 10:39 PM.

11-21-2010, 10:42 PM	#59
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: GEN III C10 Full Air ride build music to my ears!! sounds and looks great man! __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

11-22-2010, 11:43 PM	#60
breeze85cten Registered User Join Date: Jul 2010 Location: Gilbert, AZ Posts: 162	Re: GEN III C10 Full Air ride build Thanks! I love the sound when it lopes and moves the trucks back and forth!

11-23-2010, 11:13 AM	#61
WillieloRidez Registered User Join Date: Feb 2010 Location: Wichita Kansas Posts: 667	Re: GEN III C10 Full Air ride build Lookin great man! __________________ WillieloRidez Drive em in Drag em out! Projects: 1956 Chevrolet 210 2dr post 58 chevrolet 2dr delray 58 chevrolet belair 4dr hardtop 1965 Chevelle big block 4spd 88 crewcab 1/2 ton long bed aka STRETCH Lt1-4l60e http://67-72chevytrucks.com/vboard/s...d.php?t=388445

11-29-2010, 01:02 PM	#62
bmfpeterson Registered User Join Date: Jul 2008 Location: Queen Creek, AZ Posts: 538	Re: GEN III C10 Full Air ride build awesome so I guess I lose the race hahahahaha

12-13-2010, 08:22 PM	#63
Devillusion Registered User Join Date: Jan 2010 Location: Brandon, Manitoba, Canada Posts: 782	Re: GEN III C10 Full Air ride build very nice.... __________________ 1967 K30 4x4/12v Cummins/getrag/D60/D70/355s 1967 GMC suburban 4x4/LS swap 5.3/4500/205/10 bolt/14 bolt full floater 1963 C10 reg cab long box 1970 Chevelle 1968 Biscayne 2dr post "...there is no excuse for what I am about to do, but dangit....it's gonna be fun!"

01-28-2011, 01:42 AM	#69
breeze85cten Registered User Join Date: Jul 2010 Location: Gilbert, AZ Posts: 162	Re: GEN III C10 Full Air ride build Man I haven't posted on my own build thread forever! Well heres an update. I have been driving my truck breaking her in for a dyno tune which should be happening soon. Also been making sure everything is running good and it is. Ran into a weird noise coming from tranny, squealing sound, which 300 bucks later found out it was just my stupid crank case vent tubes routed wrong. Pulled tranny and had a new TC sent cause thought it might have been a spun bearing. Sucked but glad I fixed it. Runs great just needs to be tuned to get the best HP to the wheels. It still is a load of fun. I will try and get a nice break stand on here soon when I get a chance and more pics!

01-28-2011, 01:48 AM	#70
breeze85cten Registered User Join Date: Jul 2010 Location: Gilbert, AZ Posts: 162	Re: GEN III C10 Full Air ride build Forgot I had some pics of my front put together, has the cowl hood which I swapped for a stock hood because I never was a fan of the cowl hood look. Love my new hood and will get some pics of it soon but suck since its purple! Paint will come soon. Also took my phantom grill and made it into a normal billet grill which is my favorite grill setup on these trucks. Last edited by breeze85cten; 01-28-2011 at 01:49 AM.

01-28-2011, 01:51 AM	#71
breeze85cten Registered User Join Date: Jul 2010 Location: Gilbert, AZ Posts: 162	Re: GEN III C10 Full Air ride build heres a couple Attached Images

01-28-2011, 03:44 AM	#72
franky69c10 chevy runs deep Join Date: Mar 2006 Location: PHOENIX AZ Posts: 1,074	Re: GEN III C10 Full Air ride build Look'n good so u did ur own harness was it hard and maybe u can help me with my harness when I get my 5.3 Posted via Mobile Device __________________ RAIDER NATION 1969 c10 swb soon 2 b on the road... My LWB is a SWB now http://67-72chevytrucks.com/vboard/s...d.php?t=498241

01-28-2011, 11:10 PM	#73
breeze85cten Registered User Join Date: Jul 2010 Location: Gilbert, AZ Posts: 162	Re: GEN III C10 Full Air ride build If the harness is for that black c10 I am down!! I did work my own harness but with all the help from lt1swap.com This guy has all the information you need to work your own harness if you want to save a 1000 bucks. It takes lots of time but I did it that way because my harness was cut in a couple places and to save money of course. The whole time i was worried about it not being right but it fired right up. Let me know if you have any more questions, since you in AZ that makes it easier. I was at the pavillions last weekend when barrett jackson was here too. Truck was sitting on the ground there for a couple of hours, might start taking it more.



Register or Log In To remove these advertisements.

01-29-2011, 01:00 AM	#74
73gmc454 Registered User Join Date: Dec 2010 Location: louisville ohio Posts: 375	Re: GEN III C10 Full Air ride build Looks great keep goin !

02-10-2011, 12:29 AM	#75
breeze85cten Registered User Join Date: Jul 2010 Location: Gilbert, AZ Posts: 162	Re: GEN III C10 Full Air ride build Got the dyno on my ride finally and hit my goal! 304 horses to the wheels!!! Thats out of a baby 4.8l! Sounds mean as hell too! I will try and figure out how to post my dyno sheet. I am horrible when it comes to little crap like that. Now I am sure I can beat any rich kid rolling around in his parents mustang or charger! No offense!

Register or Log In To remove these advertisements.