The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-07-2019, 11:08 PM   #1
Big Blue
Registered User
 
Big Blue's Avatar
 
Join Date: Feb 2005
Location: Northeast--Bethlehem, Pennslyvania
Posts: 620
bench seat slider tracks

Looking to purchase a set of bench seat slider tracks, I do not know what year I have now. Look at the pictures and you may be able to tell what year I need. I have one set but need another because I am putting in buckets from another vehicle. (not Chevy or GM). So I am making a seat bracket to put the seats on.

Thanks, John
Attached Images
  
__________________
Big Blue ( John )
79 Chevy Pick up.....My Dailey


STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.
Big Blue is online now   Reply With Quote
Old 02-08-2019, 06:14 AM   #2
TKCR
Senior Member
 
TKCR's Avatar
 
Join Date: Oct 2014
Location: Ohio
Posts: 4,146
Re: bench seat slider tracks

Well I have seen a lot of tracks, but your going to have to show the whole track. But only showing what you have shown, I would say one track is a truck. The other track might be a Suburban. But there is no way of saying what year, without seeing the whole track.
In the pic, left to right:
73-76
77-80
81-87
These are all trucks. Suburbans mounts are almost indentical, except for the angle of the mount to the floor, like your 2nd pic.
Attached Images
 
TKCR is offline   Reply With Quote
Old 02-08-2019, 10:04 AM   #3
Big Blue
Registered User
 
Big Blue's Avatar
 
Join Date: Feb 2005
Location: Northeast--Bethlehem, Pennslyvania
Posts: 620
Re: bench seat slider tracks

Thanks TKCR, I think the ones in the middle are the ones I need. 77 to 80. What are you asking for the set? Will you take Money Order?
Thank again, John
__________________
Big Blue ( John )
79 Chevy Pick up.....My Dailey


STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.
Big Blue is online now   Reply With Quote
Old 02-08-2019, 08:19 PM   #4
TKCR
Senior Member
 
TKCR's Avatar
 
Join Date: Oct 2014
Location: Ohio
Posts: 4,146
Re: bench seat slider tracks

Quote:
Originally Posted by Big Blue View Post
Thanks TKCR, I think the ones in the middle are the ones I need. 77 to 80. What are you asking for the set? Will you take Money Order?
Thank again, John
Sending a PM.
TKCR is offline   Reply With Quote
Old 02-09-2019, 08:35 AM   #5
Hammered 77
Registered User
 
Hammered 77's Avatar
 
Join Date: Dec 2012
Location: Pendleton, Indiana
Posts: 157
Re: bench seat slider tracks

TK, is there any difference in functional quality in the three set that you've seen?

Thanks
Rick
Hammered 77 is offline   Reply With Quote
Old 02-09-2019, 09:03 AM   #6
TKCR
Senior Member
 
TKCR's Avatar
 
Join Date: Oct 2014
Location: Ohio
Posts: 4,146
Re: bench seat slider tracks

Quote:
Originally Posted by Hammered 77 View Post
TK, is there any difference in functional quality in the three set that you've seen?

Thanks
Rick
No, they are all function pretty much the same. The only thing you need you to be aware of, is that the tracks must match the frame of the seat, for it to bolt up. All 3 of these tracks will bolt directly to the floor of any 73-87 cab.
For an example: You cannot use 77-80 tracks on a 73-76 or even a 81-87 frame. They won't fit, or bolt up. So the tracks must match the seat frame.
If your doing modifications, like Big Blue is, it won't matter.
TKCR is offline   Reply With Quote
Old 02-09-2019, 05:32 PM   #7
Big Blue
Registered User
 
Big Blue's Avatar
 
Join Date: Feb 2005
Location: Northeast--Bethlehem, Pennslyvania
Posts: 620
Re: bench seat slider tracks

TKCR, I will take the ones in the middle on the price you stated plus shipping. What is the Total cost then? I will send a money order, Please send your address.

Thanks Again John
__________________
Big Blue ( John )
79 Chevy Pick up.....My Dailey


STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.
Big Blue is online now   Reply With Quote
Old 02-10-2019, 10:59 AM   #8
TKCR
Senior Member
 
TKCR's Avatar
 
Join Date: Oct 2014
Location: Ohio
Posts: 4,146
Re: bench seat slider tracks

Quote:
Originally Posted by Big Blue View Post
TKCR, I will take the ones in the middle on the price you stated plus shipping. What is the Total cost then? I will send a money order, Please send your address.

Thanks Again John
Sending PM for address & total cost.
The ones in the photo above, are long gone. That pic was taken awhile ago. I don't have any that have been sandblasted yet, so this is all I have available. They will need to be sandblasted, if you want then to look better.
Attached Images
 
TKCR is offline   Reply With Quote
Old 02-10-2019, 12:04 PM   #9
Big Blue
Registered User
 
Big Blue's Avatar
 
Join Date: Feb 2005
Location: Northeast--Bethlehem, Pennslyvania
Posts: 620
Re: bench seat slider tracks

I'll take the one in to second picture then.
John
__________________
Big Blue ( John )
79 Chevy Pick up.....My Dailey


STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.
Big Blue is online now   Reply With Quote
Old 02-10-2019, 12:10 PM   #10
TKCR
Senior Member
 
TKCR's Avatar
 
Join Date: Oct 2014
Location: Ohio
Posts: 4,146
Re: bench seat slider tracks

Quote:
Originally Posted by Big Blue View Post
I'll take the one in to second picture then.
John
This set? They are for the 77-80. These are the just like the second set in the pic of post #2.
Attached Images
 

Last edited by TKCR; 02-10-2019 at 04:03 PM.
TKCR is offline   Reply With Quote
Old 02-10-2019, 10:30 PM   #11
Big Blue
Registered User
 
Big Blue's Avatar
 
Join Date: Feb 2005
Location: Northeast--Bethlehem, Pennslyvania
Posts: 620
Re: bench seat slider tracks

YES, DEM BE DA ONES.
Will send out money order out tomorrow evening.

John
__________________
Big Blue ( John )
79 Chevy Pick up.....My Dailey


STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.
Big Blue is online now   Reply With Quote
Old 02-13-2019, 07:24 PM   #12
Big Blue
Registered User
 
Big Blue's Avatar
 
Join Date: Feb 2005
Location: Northeast--Bethlehem, Pennslyvania
Posts: 620
Re: bench seat slider tracks

Sent you a PM, Money order sent today.

John
__________________
Big Blue ( John )
79 Chevy Pick up.....My Dailey


STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.
Big Blue is online now   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:38 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com