The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-15-2018, 08:10 AM   #1
parrisc19844x4_468
Registered User
 
parrisc19844x4_468's Avatar
 
Join Date: Oct 2010
Location: Town of Summit, WI
Posts: 322
78 GMC Steering column

thanks for any help in advance. I disassembled my steering column to replace the bearing and some other warn parts. I need help to understand how to line up the lock tumbler and the starter linkage to the starter switch. I have it close but wont get to the position to engage the starter. Help
__________________
2017 Silverado LTZ 6.2
1984 Scottsdale K10 - 468 700r 4x4 lwb
1978 GMC Sierra Grande K15 350 Soond to be 406 th350 4x4 swb
1968 GMC 20 305 V6 good ole wood hauler.

Good Fences make good neighbors

Last edited by parrisc19844x4_468; 07-15-2018 at 08:12 AM. Reason: add pics
parrisc19844x4_468 is offline   Reply With Quote
Old 07-15-2018, 09:12 AM   #2
mikentosh
Registered User
 
mikentosh's Avatar
 
Join Date: Sep 2013
Location: San Jose, CA
Posts: 406
Re: 78 GMC Steering column

i Just did this yesterday morning and I will say it is one of the more frustrating things to do. First question is are you working on a tilt or non-tilt column?

On a non-tilt I think the two places it can be off are misalignment between the actuator rack and the gear that the ignition tumbler slides in to. When it’s put together the rack has to be on the right tooth of the gear or you won’t get full exension of the key (either it won’t go into ACC position or it won’t turn all the way to start).

The second place is down at the ignition switch. The switch has oval holes which allows for minor adjustment up or down to correctly engage. There isn’t a lot of adjustment here.
mikentosh is offline   Reply With Quote
Old 07-16-2018, 10:22 AM   #3
parrisc19844x4_468
Registered User
 
parrisc19844x4_468's Avatar
 
Join Date: Oct 2010
Location: Town of Summit, WI
Posts: 322
Re: 78 GMC Steering column

Thanks Mike, its a non-tilt , automatic.

Yes, I understand that the aligment has to be right there is where I am stuck. on. I am going to try to get some decent pictures this morning yet.

I am not sure that I even have actuator rack in the right position before I slide the housing into the rack, when I do it pushed the actuator rack down, should I be holding the actuator rack from sliding down to the on position?
__________________
2017 Silverado LTZ 6.2
1984 Scottsdale K10 - 468 700r 4x4 lwb
1978 GMC Sierra Grande K15 350 Soond to be 406 th350 4x4 swb
1968 GMC 20 305 V6 good ole wood hauler.

Good Fences make good neighbors
parrisc19844x4_468 is offline   Reply With Quote
Old 07-16-2018, 12:01 PM   #4
parrisc19844x4_468
Registered User
 
parrisc19844x4_468's Avatar
 
Join Date: Oct 2010
Location: Town of Summit, WI
Posts: 322
Re: 78 GMC Steering column

Got it Mike, thanks.

The trick is to set the gear so the flat portion is facing the top, pull the
actuator rack all the way out, the housing with the gear should slide freely over the actuator. That worked for me anyway.
__________________
2017 Silverado LTZ 6.2
1984 Scottsdale K10 - 468 700r 4x4 lwb
1978 GMC Sierra Grande K15 350 Soond to be 406 th350 4x4 swb
1968 GMC 20 305 V6 good ole wood hauler.

Good Fences make good neighbors
parrisc19844x4_468 is offline   Reply With Quote
Old 07-16-2018, 03:03 PM   #5
mikentosh
Registered User
 
mikentosh's Avatar
 
Join Date: Sep 2013
Location: San Jose, CA
Posts: 406
Re: 78 GMC Steering column

Glad you got it. Its quite tough to describe...easier with pictures. I found its best to have the section of the column containing the key separated from the rest of the column, then get the gear and the rack lined up correctly (on the right tooth), then gently install the ignition key tumbler into that section and onto the gear (which will hold the gear from moving and the rack locked place), then you can slide that section back down over top of the column.
mikentosh is offline   Reply With Quote
Reply

Bookmarks

Tags
column, gmc, steering

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:26 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com