The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-11-2017, 07:46 PM   #1
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
Talking Today's score!

I went and picked these parts up today for the Ramp Rat.
New dash pad used tilt wheel and heater box assembly.
All for $135.00

I need some help on the tilt though. Does it look like a truck are is it a van that has been modified? The guy I got it from says its factory truck.
Attached Images
    
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 01-11-2017, 07:50 PM   #2
70cst
Senior Member
 
70cst's Avatar
 
Join Date: Feb 2001
Location: New Madison, Ohio
Posts: 21,337
Re: Today's score!

One word on your score ...
Attached Images
 
__________________
A husband can be right...or...A husband can be happy.

67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk.

1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc

JOHN 17:3...The better side of "LIFE"


Remember: Everyday is a good day...Some are just gooder!
70cst is offline   Reply With Quote
Old 01-11-2017, 07:52 PM   #3
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
Question Re: Today's score!

Here are some measurements on it.
Over all length is like 38" 1-2 pictures. That's end of shaft to the steering wheel end.
3-4 pictures bottom bearing to bottom of top collar 26".
Anybody see anything that would say it's not a truck. Doesn't really matter but would like to know for sure one way are the other.
Also need to know how to get the 4 way switch out and replace it with a good working one.

Attached Images
    
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 01-11-2017, 08:03 PM   #4
leddzepp
Moderator
 
leddzepp's Avatar
 
Join Date: May 2007
Location: Southern Cal
Posts: 19,972
Re: Today's score!

Van column. The length of the steering shaft gives it away.
__________________
1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed.

1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck.


RIP ElJay
RIP 67ChevyRedneck
RIP Grumpy Old Man
leddzepp is offline   Reply With Quote
Old 01-11-2017, 08:05 PM   #5
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
Talking Re: Today's score!

Quote:
Originally Posted by leddzepp View Post
Van column. The length of the steering shaft gives it away.
That's what I thought also. Oh well it's still a good deal and it will bolt in I hope with no problems.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 01-11-2017, 08:10 PM   #6
leddzepp
Moderator
 
leddzepp's Avatar
 
Join Date: May 2007
Location: Southern Cal
Posts: 19,972
Re: Today's score!

It will work perfectly, just need to collapse the lower steering shaft a bit
__________________
1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed.

1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck.


RIP ElJay
RIP 67ChevyRedneck
RIP Grumpy Old Man
leddzepp is offline   Reply With Quote
Old 01-11-2017, 08:17 PM   #7
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
Thumbs up Re: Today's score!

Yea I'm trying to find the info now. I found a post by 'dmec' on this and wondering if he is still around. I want to replace the upper collar for a floor shifter one.


http://67-72chevytrucks.com/vboard/s...d.php?t=155403
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 01-11-2017, 08:21 PM   #8
Boog
laying low
 
Boog's Avatar
 
Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 12,888
Re: Today's score!

It will take some work Andy but it should make you a good one. Good deal on the package price too.
If I'm not mistaken there is info on the van tilts up in the faq.
__________________
Boog
69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver
primer is finer
91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said.

I stand for the flag and kneel at the cross
Boog is offline   Reply With Quote
Old 01-11-2017, 08:27 PM   #9
71swb4x4
Senior Member
 
71swb4x4's Avatar
 
Join Date: Nov 2003
Location: Brookings, SD
Posts: 10,497
Re: Today's score!

It's red, that's probably why it was such a good deal. We all know red is an awful color.





__________________
Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.
71swb4x4 is offline   Reply With Quote
Old 01-11-2017, 09:13 PM   #10
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
Thumbs up Re: Today's score!

Quote:
Originally Posted by Boog View Post
It will take some work Andy but it should make you a good one. Good deal on the package price too.
If I'm not mistaken there is info on the van tilts up in the faq.
Yea I think I found the info I needed. I'll try and post pictures as I go when I start on it. Tomorrow I have to go pick up 2 clusters I bought for $20.00 but they are just plain clusters no bottom gauges. But both work. So I get two good speedo and fuel gauges out of them.
I'm waiting on the gasket's for the heater box also so until it get here I'm just going to clean it up and paint it black I think.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 01-11-2017, 09:39 PM   #11
LockDoc
The Older Generation

 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,270
Re: Today's score!

-
Another thing you will have to do is to cut a new slot for the NSS. The van is about half way up the tube and the Pickup is down at the bottom....

LockDoc
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles

(My Dually Pickup Project Thread)

http://67-72chevytrucks.com/vboard/s...d.php?t=829820

-
LockDoc is offline   Reply With Quote
Old 01-11-2017, 09:50 PM   #12
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
Thumbs up Re: Today's score!

Quote:
Originally Posted by Boog View Post
It will take some work Andy but it should make you a good one. Good deal on the package price too.
If I'm not mistaken there is info on the van tilts up in the faq.
Quote:
Originally Posted by LockDoc View Post
-
Another thing you will have to do is to cut a new slot for the NSS. The van is about half way up the tube and the Pickup is down at the bottom....

LockDoc

It's a 4 speed LockDoc!
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 01-11-2017, 10:18 PM   #13
hugger6933
Registered User
 
Join Date: Oct 2008
Location: Marianna Arkansas
Posts: 7,257
Re: Today's score!

Andy I got a van tilt and the shifter retention pin was wallowed out. I made it into a look alike factory floor shift tilt by grinding the "knot" where the shifter was off and filling with short hair fiber strand. The other holes I welded up and body worked it all out and it turned out awesome. Since it was "messed up" I got it for $30 it changed over to a floor shift a lot easier than I had expected.
One more thing I did was to place the shifter in park and then welded the shifter arm to the housing before cutting off the shifter tab at the bottom, That was to keep everything in place and to prevent any future headaches. Oh by the way great snags on the parts. Jim
hugger6933 is offline   Reply With Quote
Old 01-12-2017, 09:20 AM   #14
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
Question Re: Today's score!

Quote:
Originally Posted by hugger6933 View Post
Andy I got a van tilt and the shifter retention pin was wallowed out. I made it into a look alike factory floor shift tilt by grinding the "knot" where the shifter was off and filling with short hair fiber strand. The other holes I welded up and body worked it all out and it turned out awesome. Since it was "messed up" I got it for $30 it changed over to a floor shift a lot easier than I had expected.
One more thing I did was to place the shifter in park and then welded the shifter arm to the housing before cutting off the shifter tab at the bottom, That was to keep everything in place and to prevent any future headaches. Oh by the way great snags on the parts. Jim
Ok yea I saw a post about JB welding the holes up and grinding it back down smooth. Anybody tell me what to they did with this though?
I have a small wire feeder welder that I could use to weld it but!
The rusty part is bare metal and it sticks up under the column indicator.

Can some one tell me how to get the outter covers off also.
Attached Images
 
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 01-13-2017, 12:13 AM   #15
James the III
Registered User
 
Join Date: Nov 2016
Location: lowell ma
Posts: 750
Re: Today's score!

Quote:
Originally Posted by LockDoc View Post
-
Another thing you will have to do is to cut a new slot for the NSS. The van is about half way up the tube and the Pickup is down at the bottom....

LockDoc
Is this a clearance issue( with dash,etc) or just the wires not being long enough?
James the III is offline   Reply With Quote
Old 01-13-2017, 08:07 AM   #16
Katrina/10
Registered User
 
Katrina/10's Avatar
 
Join Date: Oct 2010
Location: Ocean Springs, MS
Posts: 1,746
Re: Today's score!

The top outer cover is a steel sleeve that is pressed on the aluminum casting. To get it off you have to remove the tilt and turn levers, hazard knob, and tap it up from the bottom.
__________________
Gary

1971 Chevrolet C/10
1951 GMC 100
1977 GMC C15
1955 Chevrolet 3100
Katrina/10 is offline   Reply With Quote
Old 01-13-2017, 08:40 AM   #17
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,761
Re: Today's score!

Good deal Andy

Quote:
Originally Posted by James the III View Post
Is this a clearance issue( with dash,etc) or just the wires not being long enough?
I've used van tilts with NSS in factory position. Yes, the wiring is short, so you need to make up extensions with a male and a female connector at each end. the other thing that is needed is swap the brake push rod to the opposite side of the brake peddle
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is offline   Reply With Quote
Old 01-13-2017, 06:55 PM   #18
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
Thumbs up Re: Today's score!

I guess I have to get the old steering out and knock the sleeve down to make it all fit. That may be awhile. I have to get the column fixed up enough to install it. I need to take it a part and clean it good and grease the bearings good before installing it.

Anybody have any good pictures and notes for this?
I think I'll order the tilt wheel turn signal with hazaed button and take it a part to clean it up.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 01-13-2017, 07:05 PM   #19
57larry
Registered User
 
Join Date: Nov 2007
Location: Indianapolis
Posts: 1,160
Re: Today's score!

it's a van column, but a good deal and not hard to use
57larry is offline   Reply With Quote
Old 01-14-2017, 07:34 PM   #20
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
Thumbs up Re: Today's score!

Another day another score! Picked up a bench seat and electric washer out of a Chevy truck for $100.00.
The seat has the arm rest in it and the one in my 71 was nice so I hope this one will seat good to.
The seat will need to be cleaned good and the old took out. I need a couple of days to do it and the next few weeks are going to be full. So that's on hold for awhile.

Got the jug mounted & wired but need the water hoses to complete.

For the guy's who want to do this mod a little info on wiring.
The pump is hot all the time. Run the red wire from pump to 12 volts. I placed a 20 amp fuse inline with it also. Run the ground to the dash switch and plug it to the inside wire on the switch. When you push the wiper button in the pump is activated.
The switch has 3 wires connected to it with a plastic holder. 2 wires are side by side the inside one is the one you want.
Attached Images
    
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 01-14-2017, 07:52 PM   #21
TwoFiftyShifter
Registered User
 
Join Date: Nov 2008
Location: Gwinnett GA
Posts: 1,803
Re: Today's score!

I just put an 88-94 bench in my 71.

I love it. Very. Comfortable. Width is perfect.
__________________
1982 K10 SWB
1987 V20 - Sold - Doh!
TwoFiftyShifter is offline   Reply With Quote
Old 01-14-2017, 08:23 PM   #22
70LonghornCST
Moderator
 
70LonghornCST's Avatar
 
Join Date: Jun 2008
Location: Modesto, CA
Posts: 5,775
Re: Today's score!

Great score! Here's the LINK to make it work for you. Good luck, and congratulations!
__________________
2018 Chevy Crew Cab
2006 Impala SS
1965 Plymouth Sport Fury
1970 Chevy Longhorn
  • Bucket Seats
  • Shoulder Belts
  • Front Tow Hooks
  • Factory Air
  • Factory Speedwarning, Tach & Vaccum
  • Factory Tilt
  • CST Package
  • AM/FM Radio
  • Bumper Guards
Richard

70 Longhorn CST Build

Adding an AM/FM Decal
70LonghornCST is offline   Reply With Quote
Old 01-14-2017, 08:33 PM   #23
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
Talking Re: Today's score!

Now to find some wiper arm nozzles like on my 71.
The Rat is getting a make over one piece at a time!





__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 01-22-2017, 09:55 PM   #24
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
Thumbs up Re: Today's score!

I bought this off E bay this morning. The old one wouldn't work and I took it apart and the worm gear was broke in to peices.
Attached Images
 
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:32 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com