Scrapyards - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1972trucks · 02-13-2011, 02:29 AM

It makes me so mad when you find something in a scrapyard and they rather crush it than sell it to someone. I found a solid 72 2wd blazer today with posi and a 4speed tilt in it and i cant buy a thing off of it. The guy openly told me he paid scrap price for it and i offered him $1500 cash for it and he wouldnt take it. I was wondering how to tell the difference in a truck and blazer door, they didnt have the screws below the vent windows.

67chevy1series · 02-13-2011, 04:18 AM

well that is awkward..... blazer doors dont have a top window chanel trucks do.....i am not sure if that what you wanted to know...

**leddzepp** · 02-13-2011, 04:23 AM

I am confused...did you find the Blazer in a scrapyard? Or did another guy find it, and is now trying to resell it?

dixietruck71 · 02-13-2011, 06:39 AM

sounds like a scrap yard crushed another one and he was their to whitness the murder. dont quite get the door thing though

cdowns · 02-13-2011, 07:09 AM

more scrapyards than not will not sell complete vehicles due to the laws on car dealerships and liability issues(lawyers) as any dimwit can sue for anything nowadays

Tx Firefighter · 02-13-2011, 07:58 AM

I swear, around here all the junkyards sell dope and use the junk cars as a front.

There is a very big junkyard near me. They have two strippers that work the counter inside the office. When I say stripper, I mean titty dancer. Both of them drive new Corvettes parked right out front. I walked in one time and told them I needed a 5 on 5 bolt pattern wheel to use for my spare tire. They told me they didn't have any of them. I could see a dozen of them from the front fence. Still, "we don't have any".

They must be selling the dope or something because it's not car parts they're selling.

**special-K** · 02-13-2011, 09:01 AM

I hate the mentality with so many boneyards that makes them more focused on a one shot scrap deal than providing needed parts to many (the original reason junk yards exist),which will provide the fools with more income. it does seems like a crack head mentality...very short sighted. none of my yards have pole huggers,though

**72 tigger** · 02-13-2011, 10:03 AM

I think he's asking if Blazers had the screw below the vent window like the 72 trucks did.

63chevyll · 02-13-2011, 10:37 AM

Well let's remember there is a difference between scrap yards and junk yards....
Posted via Mobile Device

teeitup · 02-13-2011, 11:35 AM

Blazer doors have a reinforcement plate around door latch, you can see if when you open door. Sorry I don't have a pic of one.

**special-K** · 02-13-2011, 11:57 AM

Quote:

Originally Posted by 63chevyll

Well let's remember there is a difference between scrap yards and junk yards....
Posted via Mobile Device

There is a difference. True,I was talking about junkyards too eager to send whole vehicles to the scrapper. But,the scrap yard I go to sells anything they have there. I bought a blue porcelin bath tub that was immaculate for $30 that they probably paid $3 for. I ended up deciding it was too much hassle getting it upstairs in the house I bought it for and took it back for $3. My neighbor bought a whole '72 truck someone hauled in that had some great options. After getting what he wanted he hauled it right back and scraped it again. This is an example of a smart business man who knows how to make money

ChevLoRay · 02-13-2011, 12:38 PM

Texas has a "line" which defines what can be sold intact, and what has to be scrapped. If it is behind the line, the title goes to the State. Kinda hard to sell a complete vehicle w/o a title...in Texas, if it is in a salvage yard.

RichardJ · 02-13-2011, 01:41 PM

Calif has similar laws. A wrecking yard has so many hours to turn the title into the DMV. It's a guess, but I think they have 72 hours. The state can at any time enter a wrecking yard and check every car to see if it has been cleared with the DMV.
In many, many decades past, many wrecking yards operated almost like chop shops. They would take in cars without titles, not knowing or caring if they were stolen. I'm sure they were all too honest to steal cars themselves.

Before the Salvage laws came into effect, a car could be sold by submitting paper work to the DMV as "Resurrected Junk". The DMV would issue a clean title to the new owner. This had to be done before the car left the yard. Today it would be given a "Salvage" title, but it is much more difficult and I'm not sure of the process. Dealing with the DMV is even more aggravating for wrecking yards than it is for you.

Many wrecking yards also have used car licenses. If they plan on reselling a car when they take it in, then the paper work is handled just like a used car lot would.

**special-K** · 02-13-2011, 02:11 PM

I still don't see how any of these laws would keep a scrap yard from selling a rear axle or steering column.

1972trucks · 02-13-2011, 05:45 PM

ok the question with the doors was the screw and i went back and noticed the latch was the same as a truck so they was not blazer doors, they was cut down truck doors. The blazer is getting crushed tommorow i went back today and tried again and it was no luck. But if in anybody around alabama is looking for a 2wd 72 blazer frame pull a part in birmingham has one but the body is trash. I asked about the frame they want $388 for the frame front and rear end but the posi has been pulled out of the rear.

02-13-2011, 02:29 AM	#1
1972trucks Registered User Join Date: Apr 2010 Location: alabama Posts: 111	Scrapyards It makes me so mad when you find something in a scrapyard and they rather crush it than sell it to someone. I found a solid 72 2wd blazer today with posi and a 4speed tilt in it and i cant buy a thing off of it. The guy openly told me he paid scrap price for it and i offered him $1500 cash for it and he wouldnt take it. I was wondering how to tell the difference in a truck and blazer door, they didnt have the screws below the vent windows.

02-13-2011, 04:18 AM	#2
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Scrapyards well that is awkward..... blazer doors dont have a top window chanel trucks do.....i am not sure if that what you wanted to know...

02-13-2011, 04:23 AM	#3
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,979	Re: Scrapyards I am confused...did you find the Blazer in a scrapyard? Or did another guy find it, and is now trying to resell it? __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

02-13-2011, 06:39 AM	#4
dixietruck71 Registered User Join Date: Dec 2010 Location: ravensdale washington Posts: 111	Re: Scrapyards sounds like a scrap yard crushed another one and he was their to whitness the murder. dont quite get the door thing though __________________ 71 gme Sierra Grande lwb. 68 Rambler American 2 door 75 jeep cj5

02-13-2011, 07:09 AM	#5
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Scrapyards more scrapyards than not will not sell complete vehicles due to the laws on car dealerships and liability issues(lawyers) as any dimwit can sue for anything nowadays __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

02-13-2011, 07:58 AM	#6
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Scrapyards I swear, around here all the junkyards sell dope and use the junk cars as a front. There is a very big junkyard near me. They have two strippers that work the counter inside the office. When I say stripper, I mean titty dancer. Both of them drive new Corvettes parked right out front. I walked in one time and told them I needed a 5 on 5 bolt pattern wheel to use for my spare tire. They told me they didn't have any of them. I could see a dozen of them from the front fence. Still, "we don't have any". They must be selling the dope or something because it's not car parts they're selling. __________________ I'm on the Instagram- @Gearhead_Kevin

02-13-2011, 09:01 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Scrapyards I hate the mentality with so many boneyards that makes them more focused on a one shot scrap deal than providing needed parts to many (the original reason junk yards exist),which will provide the fools with more income. it does seems like a crack head mentality...very short sighted. none of my yards have pole huggers,though __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-13-2011, 10:03 AM	#8
72 tigger Senior Member Join Date: Apr 2008 Location: Berne IN Posts: 3,203	Re: Scrapyards I think he's asking if Blazers had the screw below the vent window like the 72 trucks did.

02-13-2011, 10:37 AM	#9
63chevyll gets board easy....... Join Date: Mar 2009 Location: Colorado Springs Posts: 717	Re: Scrapyards Well let's remember there is a difference between scrap yards and junk yards.... Posted via Mobile Device

02-13-2011, 11:35 AM	#10
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Scrapyards Blazer doors have a reinforcement plate around door latch, you can see if when you open door. Sorry I don't have a pic of one. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 02-13-2011 at 12:00 PM.

02-13-2011, 12:38 PM	#12
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: Scrapyards Texas has a "line" which defines what can be sold intact, and what has to be scrapped. If it is behind the line, the title goes to the State. Kinda hard to sell a complete vehicle w/o a title...in Texas, if it is in a salvage yard. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

02-13-2011, 01:41 PM	#13
RichardJ Registered User Join Date: Apr 2010 Location: So Cal Posts: 1,409	Re: Scrapyards Calif has similar laws. A wrecking yard has so many hours to turn the title into the DMV. It's a guess, but I think they have 72 hours. The state can at any time enter a wrecking yard and check every car to see if it has been cleared with the DMV. In many, many decades past, many wrecking yards operated almost like chop shops. They would take in cars without titles, not knowing or caring if they were stolen. I'm sure they were all too honest to steal cars themselves. Before the Salvage laws came into effect, a car could be sold by submitting paper work to the DMV as "Resurrected Junk". The DMV would issue a clean title to the new owner. This had to be done before the car left the yard. Today it would be given a "Salvage" title, but it is much more difficult and I'm not sure of the process. Dealing with the DMV is even more aggravating for wrecking yards than it is for you. Many wrecking yards also have used car licenses. If they plan on reselling a car when they take it in, then the paper work is handled just like a used car lot would. __________________ '67 GMC 2500, 292, 4spd, AC

02-13-2011, 02:11 PM	#14
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Scrapyards I still don't see how any of these laws would keep a scrap yard from selling a rear axle or steering column. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-13-2011, 05:45 PM	#15
1972trucks Registered User Join Date: Apr 2010 Location: alabama Posts: 111	Re: Scrapyards ok the question with the doors was the screw and i went back and noticed the latch was the same as a truck so they was not blazer doors, they was cut down truck doors. The blazer is getting crushed tommorow i went back today and tried again and it was no luck. But if in anybody around alabama is looking for a 2wd 72 blazer frame pull a part in birmingham has one but the body is trash. I asked about the frame they want $388 for the frame front and rear end but the posi has been pulled out of the rear.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.