47-55.1 Specialty Power Window kit - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**8man** · 01-11-2019, 04:24 PM

Got my Specialty Power Window kit test fit in the door. I wanted to see what had to be done so I could do any patches or repair after it was test fit.

It went in ok, but there is a bolt head that sits on the inside of the door about 10" down from the bottom of the window, when rolled up.

Has anyone installed this kit, and if so, what did you do to camoflauge that bolt in the middle of the door?

Thanks.

mr48chev · 01-11-2019, 08:23 PM

Swapping the hex head for a round head machine screw would help an maybe using one that uses an allen wrench would make it easier to tighten. Paint it the same color as the door and it might not show up too much.

**8man** · 01-11-2019, 11:08 PM

Thanks. That's probably what I'll have to do.

01-11-2019, 04:24 PM	#1
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,260	Specialty Power Window kit Got my Specialty Power Window kit test fit in the door. I wanted to see what had to be done so I could do any patches or repair after it was test fit. It went in ok, but there is a bolt head that sits on the inside of the door about 10" down from the bottom of the window, when rolled up. Has anyone installed this kit, and if so, what did you do to camoflauge that bolt in the middle of the door? Thanks. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

01-11-2019, 08:23 PM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,261	Re: Specialty Power Window kit Swapping the hex head for a round head machine screw would help an maybe using one that uses an allen wrench would make it easier to tighten. Paint it the same color as the door and it might not show up too much. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

01-11-2019, 11:08 PM	#3
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,260	Re: Specialty Power Window kit Thanks. That's probably what I'll have to do. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.