Salvage yard parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cantburn · 02-02-2006, 12:33 PM

I have set up agreements with several salvage yards I frequent. These yards have several older chevy and GMC pickups as well as a couple newer suburbans etc. There are some trim pieces left in these, dash pieces, seat belts etc., as well as what you would normally find in a wreck. They are on the way home from the fire dept. I will look through these if there is a need from someone who does not have access to a yard. I will do this for a nominal fee and will depend on the part but it will be done mainly as a service for some of you out there that don't have the resources. Chip

cantburn · 02-02-2006, 12:35 PM

I am going there Saturday and write down a list of vehicles on site and what these vehicle have as far as parts that may be utilized. I will copy a list of needs and set up delivery scenarios to zip codes. Chip

cantburn · 02-02-2006, 12:36 PM

I will also have a digital camera with me and take pictues of a needed part to see if that is the right one and condition.....

cantburn · 02-02-2006, 01:10 PM

Last but not least, if you don't wish to post the needs on this page...PM me or my E-Mail is ParrotHeadParts@aol.com

**53burb** · 02-03-2006, 03:01 AM

I would be interested in a decent, blue 60/40 bench seat from an early nineties GM truck.

cantburn · 02-03-2006, 08:38 AM

I'll start the search Burb....If I find one I'll get the info to you.

Kurt L · 02-04-2006, 04:18 PM

i'm looking for a good floor mat that came original in 91 with 5spd shifter.

alpha_male0203 · 02-04-2006, 05:57 PM

I am looking for a door that is from a 95 96 97 that is with power options.
I can't find any around here. Have couple more places to try. Looking for prices that you can get them for. Also i am looking for no dents ,paint dont matter, minor scratches, Dont need mirror will take though, also will window, and all the inerds (sorry for the spelling), I think you get it thanks

cantburn · 02-04-2006, 06:30 PM

Ok, the list is made and waiting on the weather to clear or it will be a mud bath at the yard....

partsman9606 · 02-04-2006, 07:36 PM

hey cantburn how about a overhead console for like a tahoe or burban like the one you have???

cantburn · 02-06-2006, 06:27 AM

PM sent

partsman9606 · 02-07-2006, 10:11 PM

how much for the grille???

ronsk10 · 02-08-2006, 03:59 AM

I need a 1 piece rear slider window for a 94. Thanks Ron

cantburn · 02-08-2006, 09:04 AM

look for it today

454_72_4X4 · 02-08-2006, 02:00 PM

Hey Chip,
If ya happen to run across any of those trucks that still has the door switch for the dome light, I could use a couple of 'em. No need for a special trip to the yard but if ya think of it when you're there...
Thanks;
454

alpha_male0203 · 02-11-2006, 06:07 PM

Any luck with the door. thanks man

phantom dually · 02-11-2006, 08:11 PM

Quote:

Originally Posted by 454_72_4X4

Hey Chip,
If ya happen to run across any of those trucks that still has the door switch for the dome light, I could use a couple of 'em. No need for a special trip to the yard but if ya think of it when you're there...
Thanks;
454

these can be found at the dealer for around $4 each.

*1969owner* · 02-11-2006, 08:41 PM

i need a 69 tailgate...fleetside

veedublu · 02-11-2006, 11:18 PM

I'll pay good money for a solid bench from an '88 to '94. Not interested in 60/40's, bucket seats, or work truck seats... looking for a solid bench, with or without headrests, with or without the fold-down armrest, and must be in good condition (not torn, not greasy, etc). If you run across something like this and are willing to ship, I'll make it worth your while. This goes for anyone who might have one of these

Thanks

John

cantburn · 02-12-2006, 12:30 AM

PM's sent to Veedublu and 1969owner

**bigunde** · 02-12-2006, 09:56 AM

Still waiting on specific info on that 4l60e

cantburn · 02-13-2006, 01:42 AM

Bigunde..what condition do you want the trans in....I have found them with a price range from $350.00 to $650.00 plus shipping. I am unsure of the condition of the 350.00 just the difference in salvage yards maybe.It is still a work in progress.

cantburn · 02-14-2006, 06:16 PM

Alpha here is a few pics of the door.....also found a decent 60/40 bench in blue...chip

cantburn · 02-14-2006, 06:17 PM

Here are pics of the bench.

454_72_4X4 · 02-14-2006, 07:00 PM

I could use that door handle trim piece you're holding up in the last "door" pic! Actully I need one for both sides and the little tweeter speaker cover for the passenger side.

02-02-2006, 12:33 PM	#1
cantburn ParrotHead Parts Join Date: Mar 2005 Location: Port St Lucie, Florida Posts: 218	Salvage yard parts I have set up agreements with several salvage yards I frequent. These yards have several older chevy and GMC pickups as well as a couple newer suburbans etc. There are some trim pieces left in these, dash pieces, seat belts etc., as well as what you would normally find in a wreck. They are on the way home from the fire dept. I will look through these if there is a need from someone who does not have access to a yard. I will do this for a nominal fee and will depend on the part but it will be done mainly as a service for some of you out there that don't have the resources. Chip Attached Images Last edited by cantburn; 02-07-2006 at 08:04 PM.

02-02-2006, 12:35 PM	#2
cantburn ParrotHead Parts Join Date: Mar 2005 Location: Port St Lucie, Florida Posts: 218	Re: Salvage yard parts I am going there Saturday and write down a list of vehicles on site and what these vehicle have as far as parts that may be utilized. I will copy a list of needs and set up delivery scenarios to zip codes. Chip

02-02-2006, 12:36 PM	#3
cantburn ParrotHead Parts Join Date: Mar 2005 Location: Port St Lucie, Florida Posts: 218	Re: Salvage yard parts I will also have a digital camera with me and take pictues of a needed part to see if that is the right one and condition.....

02-02-2006, 01:10 PM	#4
cantburn ParrotHead Parts Join Date: Mar 2005 Location: Port St Lucie, Florida Posts: 218	Re: Salvage yard parts Last but not least, if you don't wish to post the needs on this page...PM me or my E-Mail is ParrotHeadParts@aol.com Last edited by cantburn; 02-08-2006 at 01:52 PM.

02-03-2006, 03:01 AM	#5
53burb Registered User Join Date: May 2004 Location: Queen Creek, AZ Posts: 1,004	Re: Salvage yard parts I would be interested in a decent, blue 60/40 bench seat from an early nineties GM truck.

02-03-2006, 08:38 AM	#6
cantburn ParrotHead Parts Join Date: Mar 2005 Location: Port St Lucie, Florida Posts: 218	Re: Salvage yard parts I'll start the search Burb....If I find one I'll get the info to you.

02-04-2006, 04:18 PM	#7
Kurt L Senior Member Join Date: May 2003 Location: ne florida Posts: 2,665	Re: Salvage yard parts i'm looking for a good floor mat that came original in 91 with 5spd shifter.

02-04-2006, 05:57 PM	#8
alpha_male0203 95 extended cab sportside Join Date: Jul 2004 Location: Clinton, Iowa western. Posts: 895	Re: Salvage yard parts I am looking for a door that is from a 95 96 97 that is with power options. I can't find any around here. Have couple more places to try. Looking for prices that you can get them for. Also i am looking for no dents ,paint dont matter, minor scratches, Dont need mirror will take though, also will window, and all the inerds (sorry for the spelling), I think you get it thanks __________________ 95 Chevy k 1500 00 Chevy Silverado 1500 07 cobalt Old ladies car]

02-04-2006, 06:30 PM	#9
cantburn ParrotHead Parts Join Date: Mar 2005 Location: Port St Lucie, Florida Posts: 218	Re: Salvage yard parts Ok, the list is made and waiting on the weather to clear or it will be a mud bath at the yard.... __________________ "I Love the Smell of a Salvage Yard in the Morning" 1992 GMC K1500; The best projects are those still in progress. (Paypal verified 100% positive feedback);

02-04-2006, 07:36 PM	#10
partsman9606 a country boy can survive Join Date: Jul 2005 Location: Yulee, Fla Posts: 95	Re: Salvage yard parts hey cantburn how about a overhead console for like a tahoe or burban like the one you have??? __________________ 1991 c/1500 lowered 2/4, 6inch cowl hood 1988 c/1500 plain(girlfriends truck) 1999 chevy tahoe z71

02-06-2006, 06:27 AM	#11
cantburn ParrotHead Parts Join Date: Mar 2005 Location: Port St Lucie, Florida Posts: 218	Re: Salvage yard parts PM sent __________________ "I Love the Smell of a Salvage Yard in the Morning" 1992 GMC K1500; The best projects are those still in progress. (Paypal verified 100% positive feedback);

02-07-2006, 10:11 PM	#12
partsman9606 a country boy can survive Join Date: Jul 2005 Location: Yulee, Fla Posts: 95	Re: Salvage yard parts how much for the grille??? __________________ 1991 c/1500 lowered 2/4, 6inch cowl hood 1988 c/1500 plain(girlfriends truck) 1999 chevy tahoe z71

02-08-2006, 03:59 AM	#13
ronsk10 Registered User Join Date: Jun 2003 Location: Scotland Neck NC Posts: 316	Re: Salvage yard parts I need a 1 piece rear slider window for a 94. Thanks Ron

02-08-2006, 09:04 AM	#14
cantburn ParrotHead Parts Join Date: Mar 2005 Location: Port St Lucie, Florida Posts: 218	Re: Salvage yard parts look for it today __________________ "I Love the Smell of a Salvage Yard in the Morning" 1992 GMC K1500; The best projects are those still in progress. (Paypal verified 100% positive feedback);

02-08-2006, 02:00 PM	#15
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Re: Salvage yard parts Hey Chip, If ya happen to run across any of those trucks that still has the door switch for the dome light, I could use a couple of 'em. No need for a special trip to the yard but if ya think of it when you're there... Thanks; 454 __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey



Register or Log In To remove these advertisements.

02-11-2006, 06:07 PM	#16
alpha_male0203 95 extended cab sportside Join Date: Jul 2004 Location: Clinton, Iowa western. Posts: 895	Re: Salvage yard parts Any luck with the door. thanks man __________________ 95 Chevy k 1500 00 Chevy Silverado 1500 07 cobalt Old ladies car]

02-11-2006, 08:41 PM	#18
1969owner Account Suspended Join Date: Dec 2005 Location: martin georgia Posts: 568	Re: Salvage yard parts i need a 69 tailgate...fleetside

02-11-2006, 11:18 PM	#19
veedublu Registered User Join Date: Jul 2001 Location: Colorado Springs Posts: 159	Re: Salvage yard parts I'll pay good money for a solid bench from an '88 to '94. Not interested in 60/40's, bucket seats, or work truck seats... looking for a solid bench, with or without headrests, with or without the fold-down armrest, and must be in good condition (not torn, not greasy, etc). If you run across something like this and are willing to ship, I'll make it worth your while. This goes for anyone who might have one of these Thanks John __________________ 1976 K20 my dad bought new - longbed stepside, just turned 50k miles

02-12-2006, 12:30 AM	#20
cantburn ParrotHead Parts Join Date: Mar 2005 Location: Port St Lucie, Florida Posts: 218	Re: Salvage yard parts PM's sent to Veedublu and 1969owner __________________ "I Love the Smell of a Salvage Yard in the Morning" 1992 GMC K1500; The best projects are those still in progress. (Paypal verified 100% positive feedback);

02-12-2006, 09:56 AM	#21
bigunde Rusty Rockerfeller Join Date: May 2003 Location: South Georgia Posts: 1,631	Re: Salvage yard parts Still waiting on specific info on that 4l60e

02-13-2006, 01:42 AM	#22
cantburn ParrotHead Parts Join Date: Mar 2005 Location: Port St Lucie, Florida Posts: 218	Re: Salvage yard parts Bigunde..what condition do you want the trans in....I have found them with a price range from $350.00 to $650.00 plus shipping. I am unsure of the condition of the 350.00 just the difference in salvage yards maybe.It is still a work in progress. __________________ "I Love the Smell of a Salvage Yard in the Morning" 1992 GMC K1500; The best projects are those still in progress. (Paypal verified 100% positive feedback);

02-14-2006, 06:16 PM	#23
cantburn ParrotHead Parts Join Date: Mar 2005 Location: Port St Lucie, Florida Posts: 218	Re: Salvage yard parts Alpha here is a few pics of the door.....also found a decent 60/40 bench in blue...chip Attached Images __________________ "I Love the Smell of a Salvage Yard in the Morning" 1992 GMC K1500; The best projects are those still in progress. (Paypal verified 100% positive feedback);

02-14-2006, 06:17 PM	#24
cantburn ParrotHead Parts Join Date: Mar 2005 Location: Port St Lucie, Florida Posts: 218	Re: Salvage yard parts Here are pics of the bench. Attached Images __________________ "I Love the Smell of a Salvage Yard in the Morning" 1992 GMC K1500; The best projects are those still in progress. (Paypal verified 100% positive feedback);

02-14-2006, 07:00 PM	#25
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Re: Salvage yard parts I could use that door handle trim piece you're holding up in the last "door" pic! Actully I need one for both sides and the little tweeter speaker cover for the passenger side. __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

Register or Log In To remove these advertisements.