The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Electrical

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-28-2017, 11:15 PM   #1
dmjlambert
Senior Member
 
dmjlambert's Avatar
 
Join Date: Apr 2016
Location: Cypress, TX
Posts: 619
fuse panel detailed description or diagram

I have searched but not found this. Has anybody made a picture or diagram of the fuse panel for 67-72 that describes in detail what each fuse is for and whether it is always hot or switched at the ignition, and what the terminals are for and whether they are always hot or switched? I can't really make sense of most the labels that are printed on the fuse panel, and if I manage to figure one out, I can't retain that in my memory for the next time a few weeks or months later, when I go try to figure the next thing out. So, looking for some sort of detailed reference guide. There are some I understand such as IGN UNFUSED.
dmjlambert is online now   Reply With Quote
Old 06-29-2017, 04:45 PM   #2
VetteVet
Msgt USAF Ret
 
VetteVet's Avatar
 
Join Date: Jan 2005
Location: Kalamazoo, Michigan
Posts: 7,791
Re: fuse panel detailed description or diagram

I think it would be better to trace the wiring harness from the battery positive post to the fuse box for a better understanding of how the system works.

Positive current electricity begins at the battery Plus post with the large cable to the starter solenoid. In addition there is a fusible link from there to a junction on the right fender to protect the key off electrical circuit.

From the junction a 12 gauge red wire continues across the top of the radiator and down below the left headlight to the main junction of the positive power wires.

Shown below are the points I have mentioned. The main junction includes wires from the battery, the alternator, the regulator, and the main cab feed wire to the firewall junction block.



Name:  ammetershunt.jpg
Views: 211
Size:  36.3 KB







This is the firewall junction block showing the 12 gauge red power wire for the cab. Notice the large purple wire for the starter solenoid and the cloth covered wire which is the resistance wire for the ignition coil.

Name:  Firewallterminal 1.jpg
Views: 208
Size:  89.2 KB

The green and blue wires are the temperature sender and the oil sender wires respectively.

Next we get into the cab and follow the large red wire up the left side of the diagram. Notice it joins three other wires which are the power feeds for the horn relay the, the ignition switch, the headlight switch and the fuse panel.
All these are full time key off power wires.

Name:  Copy of Cab-1web.jpg
Views: 205
Size:  115.0 KB


Remember the large red wire is key off power to the fuse panel and it powers the things which do not require the key to be on to operate.
The stop lights
The hazard light flasher
The dome light
The parking lights.
The cigar lighter terminal.
The backup lights fuse.
The radio terminal.
Here's a view of the wiring for the fuse panel. It's the same one shown above.

Name:  Copy of Cab-1web.jpg
Views: 205
Size:  115.0 KB

Notice the large red wire from the junction.

The main attachment point feeds the fuses for the items mentioned just above which do not require key on power. The primary output wire for these items is the orange wire, which feeds the stop/taillight fuse, the dome light fuse, and the headlight switch, for the parking and dash cluster lights.

The dash cluster lights are fed from the headlight switch through the variable resistor in the headlight switch, back to the fuse panel via a green wire, to the Pnl Lts fuse.

I think that's all for the key off fuses.


Looking at the diagram for the key and headlight switches we see a 12 gauge brown wire and a 12 gauge pink wire on the key switch. The brown wire is the accessory wire and it goes to the fuse panel to feed the wiper fuse, the turn signal flasher, and the heater, AC fuse.
(NOTE)- 1967 trucks did not have an accessory key switch and no brown wire.

The pink wire from the key switch goes to the junction In the denter of the diagram and tees off for the fuse panel and the ignition coil + terminal.
The pink wire at the fuse pane feeds the IGN Unfused terminals and the cluster feed fuse.

Here is a diagram of the key switch and the headlight switch.

Name:  Cab-2-web.jpg
Views: 214
Size:  104.5 KB



And here is a fuse panel with the fuses and terminals labeled. They can vary
slightly.

Name:  fuse box.jpg
Views: 249
Size:  69.0 KB

I'm sure I've missed something so if you have any questions let me know.
__________________
VetteVet

metallic green 67 stepside
74 corvette convertible
1965 Harley sportster
1995 Harley wide glide

Growing old is hell, but it beats the alternative.

Last edited by VetteVet; 06-29-2017 at 04:53 PM.
VetteVet is offline   Reply With Quote
Old 06-29-2017, 09:20 PM   #3
dmjlambert
Senior Member
 
dmjlambert's Avatar
 
Join Date: Apr 2016
Location: Cypress, TX
Posts: 619
Re: fuse panel detailed description or diagram

Thanks, great info. I'm going to read the heck out of this and study.
dmjlambert is online now   Reply With Quote
Old 06-29-2017, 11:11 PM   #4
68c10airstream
Senior Member
 
68c10airstream's Avatar
 
Join Date: Mar 2013
Location: Marquette michigan
Posts: 720
Re: fuse panel detailed description or diagram

DMJLAMBERT, you are in the best of hands with VETTEVET, patient, tons of info, kinda like one stop shopping for free!! Enjoy
68c10airstream is offline   Reply With Quote
Old 07-31-2017, 11:52 PM   #5
dmjlambert
Senior Member
 
dmjlambert's Avatar
 
Join Date: Apr 2016
Location: Cypress, TX
Posts: 619
Re: fuse panel detailed description or diagram

OK, so I searched and figured out nobody has done this before, perhaps nobody was interested other than me. I guess I'm a visual person. I mapped it out.

Switched and dimmed for dash lights means this section has 0 to full current depending on the headlight switch and dimmer position.

Return from fuel level sensor means this is attached to the ground side of the fuel gauge, and the wire that plugs into it supplies ground through the float's variable resistor. This doesn't really belong on a fuse panel, as it is only a connector, but perhaps it was considered convenient.

Always On means this always has battery voltage regardless of position of ignition switch.

Accessory means this has battery voltage in accessory and on positions of ignition switch.

Key On means this has battery voltage in on position of ignition switch, but not in accessory position.

Name:  67-72 chevy truck fuse box.jpg
Views: 117
Size:  58.3 KB

Last edited by dmjlambert; 08-01-2017 at 12:06 AM.
dmjlambert is online now   Reply With Quote
Old 08-02-2017, 11:19 AM   #6
lsversaw
Junior Member
 
lsversaw's Avatar
 
Join Date: Aug 2013
Location: McPherson, KS
Posts: 77
Re: fuse panel detailed description or diagram

Thanks for your effort, dmjlambert. The fuse panel labels have always been cryptic to me, too. Now it's clear to me that each of the 4 powered section has at least one open terminal for add-ons. Nice.
__________________
Radio restorations
AM/FM/Bluetooth/USB/smartphone conversions
Every modern radio feature in your original radio!
scott@versaw.net
lsversaw is offline   Reply With Quote
Old 08-02-2017, 12:58 PM   #7
Andy4639
Orignal Goof member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 15,759
Lightbulb Re: fuse panel detailed description or diagram

I added this fuse block into my 71.
It sits to the right of the column. It gives me plenty of fusible space for extra's. I tied it into the fused connection on the main block.





__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Reply

Bookmarks

Tags
diagram, fuse panel

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:01 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 1997-2013 67-72chevytrucks.com