The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Electrical

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-12-2017, 10:40 AM   #1
ShinyC10
Registered User
 
Join Date: Jun 2012
Location: Houston, TX
Posts: 208
Unhappy Right turn signal HONKS!!!

So I've had this problem for awhile now and can't remember if it started when I replaced my turn signal lever on my 1986 p/u. Everytime I signal right, my horn goes off. Left signal is okay though. Ive posted about this before I believe but maybe some new ideas might help. I've looked at just about all the wires in the turn signal/horn circuits and haven't found a bad wire.only place I haven't checked is in the steering column. I have the steering wheel off just to have it out of the way but don't really know what to look for in there that might be causing an issue. I took a test light to the long skinny plug on the side of the column and shows right when the turn signal gets flipped the horn spikes in voltage. Any ideas? Can't get it inspected till this is fixed
ShinyC10 is offline   Reply With Quote
Old 08-13-2017, 10:29 AM   #2
damnyankee36
Registered User
 
Join Date: Sep 2002
Location: Alamogordo, NM
Posts: 253
Re: Right turn signal HONKS!!!

That's a weird one. Does the horn honk every time the signals flash or is it constant anytime the lever is flipped?

What wire is it that you get voltage when the lever is flipped? IIRC, the only wire that triggers the horn at that location is the black wire which gets grounded by horn switch. Could it be that this wire is getting pinched to ground somehow at the turn signal switch/lever area?
damnyankee36 is offline   Reply With Quote
Old 08-13-2017, 05:13 PM   #3
ShinyC10
Registered User
 
Join Date: Jun 2012
Location: Houston, TX
Posts: 208
Re: Right turn signal HONKS!!!

Quote:
Originally Posted by damnyankee36 View Post
That's a weird one. Does the horn honk every time the signals flash or is it constant anytime the lever is flipped?

What wire is it that you get voltage when the lever is flipped? IIRC, the only wire that triggers the horn at that location is the black wire which gets grounded by horn switch. Could it be that this wire is getting pinched to ground somehow at the turn signal switch/lever area?


The horn honks only when the signal flashes. And it's the black wire that gets voltage when the signal turns on. That's the horn wire I'm assuming
ShinyC10 is offline   Reply With Quote
Old 08-13-2017, 06:41 PM   #4
damnyankee36
Registered User
 
Join Date: Sep 2002
Location: Alamogordo, NM
Posts: 253
Re: Right turn signal HONKS!!!

Yes, that's the horn wire. However, it should show voltage when the horn is NOT honking. When the horn honks, that wire is grounded by the horn switch which drops the voltage to zero. When the horn switch is opened then the wire will show voltage. That's because the power is coming from the horn relay coil. It has constant voltage applied to the other end of the coil.
damnyankee36 is offline   Reply With Quote
Old 08-13-2017, 06:44 PM   #5
damnyankee36
Registered User
 
Join Date: Sep 2002
Location: Alamogordo, NM
Posts: 253
Re: Right turn signal HONKS!!!

Something is grounding that wire every time the turn signal flashes. Don't know how. Everything on the turn signal circuits operate by switching power not grounds. Hmmm...
damnyankee36 is offline   Reply With Quote
Old 08-14-2017, 01:02 PM   #6
ShinyC10
Registered User
 
Join Date: Jun 2012
Location: Houston, TX
Posts: 208
Re: Right turn signal HONKS!!!

Quote:
Originally Posted by damnyankee36 View Post
Something is grounding that wire every time the turn signal flashes. Don't know how. Everything on the turn signal circuits operate by switching power not grounds. Hmmm...

How do you take off the metal plate that is located underneath the plastic gas cap in the steering column. I've been stuck on that part for the past day so I haven't been able to check the wires inside.
ShinyC10 is offline   Reply With Quote
Old 08-14-2017, 03:00 PM   #7
scoot_mcgrute
Registered User
 
Join Date: Apr 2004
Location: Tigard, Or
Posts: 365
Re: Right turn signal HONKS!!!

Quote:
Originally Posted by ShinyC10 View Post
How do you take off the metal plate that is located underneath the plastic gas cap in the steering column. I've been stuck on that part for the past day so I haven't been able to check the wires inside.
You will need a Lock Plate removal tool like this one to get the snap ring out

http://www.speedwaymotors.com/Perfor...4aAhn9EALw_wcB
__________________
1966 Army Truck
http://67-72chevytrucks.com/vboard/s...d.php?t=691778
scoot_mcgrute is online now   Reply With Quote
Old 08-14-2017, 04:27 PM   #8
damnyankee36
Registered User
 
Join Date: Sep 2002
Location: Alamogordo, NM
Posts: 253
Re: Right turn signal HONKS!!!

AutoZone has them to buy or loan.
damnyankee36 is offline   Reply With Quote
Old 08-14-2017, 04:52 PM   #9
gmachinz
Senior Member
 
Join Date: Jun 2011
Location: Des Moines, IA.
Posts: 3,520
Re: Right turn signal HONKS!!!

That would be an awesome prank-I'll have to remember this....lol. Sorry I'm no help here ��
__________________
Specializing in building electrical harnesses and cooling systems

HARNESSWORX

"An army may march great distances without distress, if it marches through country where the enemy is not."

-Sun Tzu: The Art of War
gmachinz is offline   Reply With Quote
Old 08-14-2017, 04:58 PM   #10
damnyankee36
Registered User
 
Join Date: Sep 2002
Location: Alamogordo, NM
Posts: 253
Re: Right turn signal HONKS!!!

No, I'm serious! They have a loaner tool program. You buy the tool and return it like a typical part when you're done. Or, you can just keep it.
damnyankee36 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:36 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 1997-2013 67-72chevytrucks.com