The 1947 - Present Chevrolet & GMC Truck Message Board Network

Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Electrical


Thread Tools Display Modes
Old 03-28-2019, 07:53 PM   #1
"Tail Gate Best Seat In House"
GOPAPA's Avatar
Join Date: Oct 2007
Location: Nampa Idaho
Posts: 5,326
Question about this headlight /parking hook up

7" Crystal Headlight w/ 10 Amber LED

LED has 3 Wire Hookups, White = Ground, Black = 12V+Function# 1, Red = 12V+Function # 2

Halogen has Red Green Black wires

First I would run a battery test to see which wires are to be for bright beam and which ones are for low beam and then hook them to the head light switch accordingly

• 3-wire, dual function 12V LED turn signals
1. Turn Signal wire
2. Parking (Running) Light wire
3. Ground wire
• Parking (Running) light stays on when headlight is on
• Easy-to-install!
• LED Turn signal has its own compartment integrated into the reflector
• Clear turn signal lens integrated into headlight lens
• LED bulbs are clear when off and amber when illuminated

The Amber 10 light is also a two system hook up and one is turn signals and the other is parking lights

My question is this ,,if I run one of the amber light hook ups to the turn signals and the other hook up to another switch ..will it work ? if both are turned on together?
Unless You are the Lead Dog ,, the Scenery Never Changes

Last edited by GOPAPA; 03-28-2019 at 08:03 PM.
GOPAPA is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 03:18 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
Copyright 1997-2013