What can be said about the 4-speed New Process NV833 overdrive manual transmission? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**aotte1** · 12-19-2015, 11:57 PM

Looks nice, good luck with it. My '86 stepper came with one originally, and below are a couple of photos. I believe the shifter, boot, and knob to be original. Only thing I changed was the speedo cable seal, otherwise original. Have changed and upgraded the engine a little over time. No power shifting, however, works great once in gear and getting on it (400 HP/400Ft-LBS @ 5600RPM). The overdrive is very nice, with 3.73 gears. I like the 3.73 gears for first too, you can go slow in first if needed.

Keith Seymore · 12-22-2015, 11:25 AM

Quote:

Originally Posted by aotte1

My '86 stepper came with one originally, and below are a couple of photos. I believe the shifter, boot, and knob to be original.

Correct - your shifter, boot and knob are original (appearing) for '86 and '87.

K

12-19-2015, 11:57 PM	#1
aotte1 Senior Member Join Date: Oct 2013 Location: lousiville Ky Posts: 2,637	Re: What can be said about the 4-speed New Process NV833 overdrive manual transmissio Looks nice, good luck with it. My '86 stepper came with one originally, and below are a couple of photos. I believe the shifter, boot, and knob to be original. Only thing I changed was the speedo cable seal, otherwise original. Have changed and upgraded the engine a little over time. No power shifting, however, works great once in gear and getting on it (400 HP/400Ft-LBS @ 5600RPM). The overdrive is very nice, with 3.73 gears. I like the 3.73 gears for first too, you can go slow in first if needed. Attached Images Last edited by aotte1; 12-20-2015 at 12:08 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.