1991 Crew Cab Short Bed Build - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Dieselwrencher** · 10-03-2016, 06:58 PM

It wears black nicely though!

**N2TRUX** · 10-05-2016, 08:12 AM

Quote:

Originally Posted by carboncrew

Thanks Ken, I appreciate that.

I forgot how much black sucks to keep clean though! lol

Arizona should thank me. All I have to do is pull it out of the garage...guaranteed rain.

If you ever get tired of keeping it clean....just saying.

carboncrew · 12-12-2016, 01:45 PM

Stay tuned...this might get interesting!

MTCK · 12-12-2016, 01:46 PM

Going to add a little horsepower? That's always a good thing.

OutlawDrifter · 12-12-2016, 05:51 PM

LS1 will leave you missing the low end torque of a gen 1 SBC.

COS399 · 12-12-2016, 08:10 PM

Nice

carboncrew · 12-13-2016, 10:04 AM

Quote:

Originally Posted by OutlawDrifter

LS1 will leave you missing the low end torque of a gen 1 SBC.

Really, stock the Z06 has double the horsepower and probably over 100ft/lbs more torque. Torque curve seems pretty flat too.

I hope I'm happy with it.

carboncrew · 12-13-2016, 10:09 AM

Quote:

Originally Posted by MTCK

Going to add a little horsepower? That's always a good thing.

Should be a little more horsepower. I kinda know myself and I'm pretty sure I can't just put a stock motor in here.

Quote:

Originally Posted by COS399

Nice

Thank you sir

OutlawDrifter · 12-13-2016, 11:00 AM

Quote:

Originally Posted by carboncrew

Really, stock the Z06 has double the horsepower and probably over 100ft/lbs more torque. Torque curve seems pretty flat too.

I hope I'm happy with it.

While the peak numbers look good, look at where the torque curve starts. The LS/LQ platforms prefer to be spun hard, more revs. The off idle torque is not the same. I can legitimately give you a comparison in the case of my Z28. The TPI 350 was a torque monster, but the 6.0 spins to 7k effortlessly and makes 425rwhp. Makes for 2 different cars.

MTCK · 12-13-2016, 11:54 AM

Wait a tick are you using an LS6 or LS7? What's the transmission plan? Gear it right you'll be fine. Or since you can't leave well enough alone, cram a little air down its throat. Should be fun!

lt1wrangler · 12-14-2016, 10:46 PM

Hurry up and figure out headers lol, Im pulling my hair out to get a set ill be happy with

carboncrew · 02-16-2017, 10:15 AM

dang....links not working...hold please (photobucket has been blocked at work...I will fix this after work, unless someone knows what little words and brackets you need to make these work...SOB)

%5BURL=http://s9.photobucket.com/user/CarbonCrew/media/98403F72-8C21-4EF1-B724-A5EFEA4C8EFF_zpsfspbpgck.jpg.html%5D%5BIMG%5Dhttp://i9.photobucket.com/albums/a59/CarbonCrew/98403F72-8C21-4EF1-B724-A5EFEA4C8EFF_zpsfspbpgck.jpg%5B/IMG%5D%5B/URL%5D

%5BURL=http://s9.photobucket.com/user/CarbonCrew/media/36D80BA2-D13D-4B81-8F22-AFED7F6EC9E4_zpsbejkyixs.jpg.html%5D%5BIMG%5Dhttp://i9.photobucket.com/albums/a59/CarbonCrew/36D80BA2-D13D-4B81-8F22-AFED7F6EC9E4_zpsbejkyixs.jpg%5B/IMG%5D%5B/URL%5D

%5BURL=http://s9.photobucket.com/user/CarbonCrew/media/43952877-DAB5-4344-A5BB-274E8F45603C_zpsf69smnjs.jpg.html%5D%5BIMG%5Dhttp://i9.photobucket.com/albums/a59/CarbonCrew/43952877-DAB5-4344-A5BB-274E8F45603C_zpsf69smnjs.jpg%5B/IMG%5D%5B/URL%5D

%5BURL=http://s9.photobucket.com/user/CarbonCrew/media/73B4A930-8B50-42E1-9F04-9977A37A5D15_zpszmhcja5z.jpeg.html%5D%5BIMG%5Dhttp://i9.photobucket.com/albums/a59/CarbonCrew/73B4A930-8B50-42E1-9F04-9977A37A5D15_zpszmhcja5z.jpeg%5B/IMG%5D%5B/URL%5D

%5BURL=http://s9.photobucket.com/user/CarbonCrew/media/7FE9F6F9-CE69-4E9A-9723-15390D743812_zps7v3owf3f.jpg.html%5D%5BIMG%5Dhttp://i9.photobucket.com/albums/a59/CarbonCrew/7FE9F6F9-CE69-4E9A-9723-15390D743812_zps7v3owf3f.jpg%5B/IMG%5D%5B/URL%5D

%5BURL=http://s9.photobucket.com/user/CarbonCrew/media/F7522F05-DF4F-4A17-9457-A794F79B9CEB_zpsrrqkwxbt.jpg.html%5D%5BIMG%5Dhttp://i9.photobucket.com/albums/a59/CarbonCrew/F7522F05-DF4F-4A17-9457-A794F79B9CEB_zpsrrqkwxbt.jpg%5B/IMG%5D%5B/URL%5D

aggie91 · 02-16-2017, 11:00 AM

looks like you need to replace %5 at each spot with [ and the %5D at each spot with ]

Hope that helps...

carboncrew · 02-16-2017, 11:05 AM

Thanks aggie91.....I think that did the trick!

So I've been gathering some of the parts I need. Not much excitement....yet

aggie91 · 02-16-2017, 11:14 AM

Nice, glad that worked and my description made sense...

carboncrew · 04-24-2017, 12:08 PM

OK....like usual, get working and don't want to stop for pictures.

(warning: pics blurry - my camera phone sucks)

Started teardown on Friday night...

Dang thats a lot of wires from TBI motor!

Getting rid of a bunch of it...then loom it all

Saturday was fittin Slosh Tubz filler panels, wiring, pull apart the dash for the Dakot Digital guages etc...

Sunday, putting the motor!, trans, t-case, driveline and dash back together

carboncrew · 04-24-2017, 12:10 PM

A before and after

Huge thanks to Shawn (TREND AUTO) and his crew. Thanks isn't enough brother

**nlped** · 04-24-2017, 12:16 PM

Awesome. This is already one of favorites, but now... top of the list.

MTCK · 04-24-2017, 12:58 PM

Cool, tell us about the motor / transmission combo.

carboncrew · 04-24-2017, 01:24 PM

Quote:

Originally Posted by MTCK

Cool, tell us about the motor / transmission combo.

Kind of changed plans...For now the motor is staying the way it came out of the corvette. It was resealed, and 'wearables' changed out and that's it. The corvette was very healthy and had only 25K miles so I'm just going to see how I like it. The trans is a fully built 4l65e and my 'old' 241C transfer case. Keeping this trans meant keeping my 241C which saves me time and money.

MTCK · 04-24-2017, 03:30 PM

Should be fun to drive! I giggled for a month after swapping my worn out 350 for the L29. Looks like an LS6.

COS399 · 04-24-2017, 07:09 PM

That looks so SWEET!!!

Let me know when you will be up here so that I can see it in person.

Low Elco · 04-25-2017, 12:27 PM

I was following on IG, nice work and a lot of it in a short time! Is Trend in the same complex with Tre5 and Ikandy?

carboncrew · 04-25-2017, 01:05 PM

Quote:

Originally Posted by COS399

That looks so SWEET!!!

Let me know when you will be up here so that I can see it in person.

I will do. Some time in July hopefully.

Quote:

Originally Posted by Low Elco

I was following on IG, nice work and a lot of it in a short time! Is Trend in the same complex with Tre5 and Ikandy?

Yeah it was some long days for sure. Shawn's been my buddy for 20+ years so I knew what I was getting myself into. When that guy is ready to work you better be ready!

Yes Ikandy, Trend and Tre are neighbors...all friends, work together and I think ALL turn out insane cars in their own respects.

Wwes · 04-27-2017, 12:09 AM

Nice build. want to sell your tbi harness? looking for one.

10-03-2016, 06:58 PM	#226
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,134	Re: 1991 Crew Cab Short Bed Build It wears black nicely though! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

12-12-2016, 01:45 PM	#228
carboncrew Registered User Join Date: Apr 2011 Location: Arizona Posts: 446	Re: 1991 Crew Cab Short Bed Build Stay tuned...this might get interesting! __________________ ________________ My very own build My tailgating ambulance

12-12-2016, 01:46 PM	#229
MTCK Registered User Join Date: Dec 2009 Location: Fairbanks, AK Posts: 1,830	Re: 1991 Crew Cab Short Bed Build Going to add a little horsepower? That's always a good thing. __________________ -Marcus 1991 V3500 L29 454 4L80E NP205 D60/14 Bolt 4.56's 1984 K30 292 TH400 NP205 D60/14 Bolt 4.56's flat bed 7'6" Meyer Plow 2022 Silverado 3500 L8T Project Daily Driver Project Heavy Hauler Project Plow Truck

12-12-2016, 05:51 PM	#230
OutlawDrifter Registered User Join Date: Aug 2012 Location: Northeast KS Posts: 1,775	Re: 1991 Crew Cab Short Bed Build LS1 will leave you missing the low end torque of a gen 1 SBC. __________________ 1999 GMC Suburban K2500 SLT, 454/4L80E 1991 Z/28, 6.0L/T56 1949 GMC 250, S10 Frame, 6.0L/4L80E Instagram @aceshighspeedshop

12-12-2016, 08:10 PM	#231
COS399 Registered User Join Date: Dec 2013 Location: Northern, MT Posts: 569	Re: 1991 Crew Cab Short Bed Build Nice __________________ 1987 GMC R2500 SC 454 T400 1988 Chevy R30 CC DRW 12 valve Cummins NV4500 GearVendors

12-13-2016, 11:54 AM	#235
MTCK Registered User Join Date: Dec 2009 Location: Fairbanks, AK Posts: 1,830	Re: 1991 Crew Cab Short Bed Build Wait a tick are you using an LS6 or LS7? What's the transmission plan? Gear it right you'll be fine. Or since you can't leave well enough alone, cram a little air down its throat. Should be fun! __________________ -Marcus 1991 V3500 L29 454 4L80E NP205 D60/14 Bolt 4.56's 1984 K30 292 TH400 NP205 D60/14 Bolt 4.56's flat bed 7'6" Meyer Plow 2022 Silverado 3500 L8T Project Daily Driver Project Heavy Hauler Project Plow Truck

12-14-2016, 10:46 PM	#236
lt1wrangler Registered User Join Date: Mar 2011 Location: richmond ky Posts: 102	Re: 1991 Crew Cab Short Bed Build Hurry up and figure out headers lol, Im pulling my hair out to get a set ill be happy with

02-16-2017, 10:15 AM	#237
carboncrew Registered User Join Date: Apr 2011 Location: Arizona Posts: 446	Re: 1991 Crew Cab Short Bed Build dang....links not working...hold please (photobucket has been blocked at work...I will fix this after work, unless someone knows what little words and brackets you need to make these work...SOB) %5BURL=http://s9.photobucket.com/user/CarbonCrew/media/98403F72-8C21-4EF1-B724-A5EFEA4C8EFF_zpsfspbpgck.jpg.html%5D%5BIMG%5Dhttp://i9.photobucket.com/albums/a59/CarbonCrew/98403F72-8C21-4EF1-B724-A5EFEA4C8EFF_zpsfspbpgck.jpg%5B/IMG%5D%5B/URL%5D %5BURL=http://s9.photobucket.com/user/CarbonCrew/media/36D80BA2-D13D-4B81-8F22-AFED7F6EC9E4_zpsbejkyixs.jpg.html%5D%5BIMG%5Dhttp://i9.photobucket.com/albums/a59/CarbonCrew/36D80BA2-D13D-4B81-8F22-AFED7F6EC9E4_zpsbejkyixs.jpg%5B/IMG%5D%5B/URL%5D %5BURL=http://s9.photobucket.com/user/CarbonCrew/media/43952877-DAB5-4344-A5BB-274E8F45603C_zpsf69smnjs.jpg.html%5D%5BIMG%5Dhttp://i9.photobucket.com/albums/a59/CarbonCrew/43952877-DAB5-4344-A5BB-274E8F45603C_zpsf69smnjs.jpg%5B/IMG%5D%5B/URL%5D %5BURL=http://s9.photobucket.com/user/CarbonCrew/media/73B4A930-8B50-42E1-9F04-9977A37A5D15_zpszmhcja5z.jpeg.html%5D%5BIMG%5Dhttp://i9.photobucket.com/albums/a59/CarbonCrew/73B4A930-8B50-42E1-9F04-9977A37A5D15_zpszmhcja5z.jpeg%5B/IMG%5D%5B/URL%5D %5BURL=http://s9.photobucket.com/user/CarbonCrew/media/7FE9F6F9-CE69-4E9A-9723-15390D743812_zps7v3owf3f.jpg.html%5D%5BIMG%5Dhttp://i9.photobucket.com/albums/a59/CarbonCrew/7FE9F6F9-CE69-4E9A-9723-15390D743812_zps7v3owf3f.jpg%5B/IMG%5D%5B/URL%5D %5BURL=http://s9.photobucket.com/user/CarbonCrew/media/F7522F05-DF4F-4A17-9457-A794F79B9CEB_zpsrrqkwxbt.jpg.html%5D%5BIMG%5Dhttp://i9.photobucket.com/albums/a59/CarbonCrew/F7522F05-DF4F-4A17-9457-A794F79B9CEB_zpsrrqkwxbt.jpg%5B/IMG%5D%5B/URL%5D __________________ ________________ My very own build My tailgating ambulance Last edited by carboncrew; 02-16-2017 at 10:32 AM.

02-16-2017, 11:00 AM	#238
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: 1991 Crew Cab Short Bed Build looks like you need to replace %5 at each spot with [ and the %5D at each spot with ] Hope that helps... __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

02-16-2017, 11:05 AM	#239
carboncrew Registered User Join Date: Apr 2011 Location: Arizona Posts: 446	Re: 1991 Crew Cab Short Bed Build Thanks aggie91.....I think that did the trick! So I've been gathering some of the parts I need. Not much excitement....yet __________________ ________________ My very own build My tailgating ambulance Last edited by carboncrew; 02-16-2017 at 11:32 AM.

02-16-2017, 11:14 AM	#240
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: 1991 Crew Cab Short Bed Build Nice, glad that worked and my description made sense... __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

04-24-2017, 12:08 PM	#241
carboncrew Registered User Join Date: Apr 2011 Location: Arizona Posts: 446	Re: 1991 Crew Cab Short Bed Build OK....like usual, get working and don't want to stop for pictures. (warning: pics blurry - my camera phone sucks) Started teardown on Friday night... Dang thats a lot of wires from TBI motor! Getting rid of a bunch of it...then loom it all Saturday was fittin Slosh Tubz filler panels, wiring, pull apart the dash for the Dakot Digital guages etc... Sunday, putting the motor!, trans, t-case, driveline and dash back together __________________ ________________ My very own build My tailgating ambulance Last edited by carboncrew; 04-24-2017 at 03:16 PM.

04-24-2017, 12:10 PM	#242
carboncrew Registered User Join Date: Apr 2011 Location: Arizona Posts: 446	Re: 1991 Crew Cab Short Bed Build A before and after Huge thanks to Shawn (TREND AUTO) and his crew. Thanks isn't enough brother __________________ ________________ My very own build My tailgating ambulance

04-24-2017, 12:16 PM	#243
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,147	Re: 1991 Crew Cab Short Bed Build Awesome. This is already one of favorites, but now... top of the list. __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

04-24-2017, 12:58 PM	#244
MTCK Registered User Join Date: Dec 2009 Location: Fairbanks, AK Posts: 1,830	Re: 1991 Crew Cab Short Bed Build Cool, tell us about the motor / transmission combo. __________________ -Marcus 1991 V3500 L29 454 4L80E NP205 D60/14 Bolt 4.56's 1984 K30 292 TH400 NP205 D60/14 Bolt 4.56's flat bed 7'6" Meyer Plow 2022 Silverado 3500 L8T Project Daily Driver Project Heavy Hauler Project Plow Truck



Register or Log In To remove these advertisements.

04-24-2017, 03:30 PM	#246
MTCK Registered User Join Date: Dec 2009 Location: Fairbanks, AK Posts: 1,830	Re: 1991 Crew Cab Short Bed Build Should be fun to drive! I giggled for a month after swapping my worn out 350 for the L29. Looks like an LS6. __________________ -Marcus 1991 V3500 L29 454 4L80E NP205 D60/14 Bolt 4.56's 1984 K30 292 TH400 NP205 D60/14 Bolt 4.56's flat bed 7'6" Meyer Plow 2022 Silverado 3500 L8T Project Daily Driver Project Heavy Hauler Project Plow Truck

04-24-2017, 07:09 PM	#247
COS399 Registered User Join Date: Dec 2013 Location: Northern, MT Posts: 569	Re: 1991 Crew Cab Short Bed Build That looks so SWEET!!! Let me know when you will be up here so that I can see it in person. __________________ 1987 GMC R2500 SC 454 T400 1988 Chevy R30 CC DRW 12 valve Cummins NV4500 GearVendors

04-25-2017, 12:27 PM	#248
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: 1991 Crew Cab Short Bed Build I was following on IG, nice work and a lot of it in a short time! Is Trend in the same complex with Tre5 and Ikandy? __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

04-27-2017, 12:09 AM	#250
Wwes Registered User Join Date: Apr 2017 Location: FL Posts: 144	Re: 1991 Crew Cab Short Bed Build Nice build. want to sell your tbi harness? looking for one.

Register or Log In To remove these advertisements.