The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-14-2019, 09:37 PM   #1
Red66C10
Registered User
 
Join Date: Jun 2018
Location: Port Byron IL
Posts: 29
Ball Joint Taper

Got a 66 C10 and want to know what the taper is on these ball joints Upper and lower.

I have a 7 degree reamer and don't know if that will work for both upper and lower? Will it work for the steering joints too?
Red66C10 is offline   Reply With Quote
Old 03-19-2019, 06:49 AM   #2
PGSigns
Senior Member
 
PGSigns's Avatar
 
Join Date: Jan 2011
Location: Hayes Va
Posts: 3,938
Re: Ball Joint Taper

What are you trying to do? What do you need to ream?
Jimmy
__________________
60 to 66 Chevy and GMC window decals
http://67-72chevytrucks.com/vboard/s...d.php?t=661131
Good friends, good food and a hotrod what else do you need?
1966 BBW long fleet Daily driver
1965 BBW short fleet Sold and going to a good home
1965 Suburban
2003 3500 Duramax
2005 Ultra Classic
PGSigns is offline   Reply With Quote
Old 03-19-2019, 10:45 PM   #3
AZ 67 C10
Registered User
 
AZ 67 C10's Avatar
 
Join Date: May 2017
Location: Phoenix, AZ
Posts: 50
Re: Ball Joint Taper

I increased the taper on my spindles to accept larger tie rods (73-87) since the rest of my suspension was 73+ and my spindles were 67-70. I cant speak for all the different years and suspension components but my setup was a 7 degree taper. There's some math involved to figure the degrees of taper so don't quote me on it being 7 degrees since I could have totally done the math wrong.. In the end I took it to a machine shop since my tapered bit was chattering when I tried to do it.
AZ 67 C10 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:24 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com