OK 69-72 mouldings

[Robert Martin]

Have several pieces of NOS black lower 69-72 trim for long bed in assorted condition. Most of the packaged pieces are good, the pieces that are out of the packaging all fell off or apart and has a few dings and scratches on the painted areas. Those pieces would make great driver pieces. 40.00 each for those. I have 2 sets of forward fender pieces left and right 35.00 each, 1 right rear fender piece 35.00, 1 door piece 50.00, 4 left cab corners 30.00 each, 1 right cab corner 30.00, several forward lower bed pieces each side and several lower rear bed pieces those in the packages 4 65.00 each. Also have 2 upper shortbed mouldings both for 300.00 and shipping on all pieces. If you want to take it all give me 900.00 and I'll ship.

[Harold Holbrook]

Is the front bumper for sale, GM or aftermarket .

[Robert Martin]

Originally Posted by Harold Holbrook

Is the front bumper for sale, GM or aftermarket .

not for sale

[Harold Holbrook]

OK, Thanks

[Sweeet67]

How much for a full set of driver quality? Long bed lower only.

[LILREDGMC]

Robert;

How about your price for lower black moldings ( long bed and cab fenders doors corners) complete. May not need to ship.

Thanks

LILREDGMC

[Robert Martin]

Originally Posted by Sweeet67

How much for a full set of driver quality? Long bed lower only.

Sweet, were you asking about a full set of lower black moulding and not just the bed? I think I misunderstood you on your comment. I could almost put a full set together with NOS and driver quality and since you asked before the last person I'll give you first shot. I'll take 500.00 for a mixed batch of lower black mouldings minus one door moulding. I only have one of those.

[Robert Martin]

Originally Posted by LILREDGMC

Robert;

How about your price for lower black moldings ( long bed and cab fenders doors corners) complete. May not need to ship.

Thanks

LILREDGMC

Lilred, I'll give you the same deal on the lowers as sweet, unless you want mostly NOS, I won't have all the pieces.

[LILREDGMC]

Robert:

I believe its proper to let Sweet make his choice since he asked first; I will await his decision.

In the meantime if you could, clear me up, all of the moldings are NOS some in packaging, some out of the packaging with light shop damage (is that a fair assessment). Thanks Robert.

LILREDGMC

[Robert Martin]

Originally Posted by LILREDGMC

Robert:

I believe its proper to let Sweet make his choice since he asked first; I will await his decision.

In the meantime if you could, clear me up, all of the moldings are NOS some in packaging, some out of the packaging with light shop damage (is that a fair assessment). Thanks Robert.

LILREDGMC

Yes sir that's a proper assessment. All of them are still in darn good shape though. Remember the set is minus one door moulding. I'll give sweet till tomorrow to answer and if you want them then post I'll take them pending sweets answer.

[LILREDGMC]

Thanks Robert appreciate the responses

LILREDGMC

[Robert Martin]

Originally Posted by LILREDGMC

Thanks Robert appreciate the responses

LILREDGMC

if you need a better assessment pm me your cell number and I'll shoot you some pictures. I went back out to look and I'm missing one door moulding and the right front fender rear moulding behind front right wheel. 10 out of the 12 pieces I'll let go for 450.00 since 2 are missing.

[Sweeet67]

Yea Robert, that is what I meant. I’m looking for the whole truck. I appreciate your willingness to let me have first choice. I’m going to have to pass this time. Thanks again

[Robert Martin]

Originally Posted by Sweeet67

Yea Robert, that is what I meant. I’m looking for the whole truck. I appreciate your willingness to let me have first choice. I’m going to have to pass this time. Thanks again

No problem.

[Robert Martin]

Lilred, here's your shot....

[Robert Martin]

Bump for lilred...

[Stickman]

Robert do you still have the two pieces of upper SWB trim? If so how much to 85225?

[Robert Martin]

Originally Posted by Stickman

Robert do you still have the two pieces of upper SWB trim? If so how much to 85225?

stickman I still have those. I will get a quote on shipping. 300.00 for the pair plus shipping. The last time I shipped a long wheel base trim it exceeded the minimum length and was fairly high. But these are like 2 feet shorter. So I'll get a quote on it for you.

[Robert Martin]

Originally Posted by Stickman

Robert do you still have the two pieces of upper SWB trim? If so how much to 85225?

stickmsn, fedex quotes are kinda funny. It could be 31.88 or 168.55. Only way I can know for sure is to go over to fedex and give them the approximate measurements then let you know. Ok Stickmsn, I stopped by fedex and gave them the dimensions and approximate weight and they're quoting about 31.00 dollars maybe 32.00. So I can get these packed up in a PVC pipe and wrapped in bubble wrap if you want them.

[Robert Martin]

Bump for stickman

[LILREDGMC]

Robert

Sorry for my delay, its called work and available time. Sent PM for phone and email. Still interested in lower black moldings. Give me a call when you get a minute, I'm tied to the desk working on a project report.

THanks

LILREDGMC

[LILREDGMC]

Robert:

As we discussed yesterday, drop me a PM with address, I'll send you payment and then you can crate it and ship it.

Thanks Robert

LILREDGMC

[Robert Martin]

Sent you a text Larry!

[EagleChief]

This is a longshot, and waaaay late, but do you have any of the longbed upper mouldings left? I'm in need of passenger side piece and the clips or hardware to put it on.

[EagleChief]

Originally Posted by EagleChief

This is a longshot, and waaaay late, but do you have any of the longbed upper mouldings left? I'm in need of passenger side piece and the clips or hardware to put it on.

**nevermind** I read that wrong. I see your upper pieces are for a shortbed. As a side not - I'm just up the road from you in Owasso.