|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-27-2018, 12:36 PM
|
#1 |
|
Registered User
Join Date: Aug 2014
Location: Lake Tawakoni, East Texas
Posts: 39
|
Can I pull out a Saginaw with the bell housing attached?
I've done plenty of engine and transmission swaps and have been trying like heck to get the transmission out the correct way but the four transmission to bell housing bolts simply will not budge, I've used PB blaster and gone up to an 18" long 1/2" breaker bar, and don't have access to a strong impact and they are just not breaking loose, and I am not weak. I thought since I'm pulling the whole thing to install a TH350 anyway can I just pull it off with the bell housing attached and cut out the middle man? I don't know much about manual trannys.
__________________
Thomas - '79 Stepside inline 6 |
|
|
|
05-27-2018, 01:02 PM
|
#2 |
|
Senior Member
 Join Date: Mar 2003
Location: Colfax-California
Posts: 8,389
|
Re: Can I pull out a Saginaw with the bell housing attached?
I do that quite often when I have a transmission jack, to help with the additional weight.
|
|
|
|
|
05-27-2018, 01:04 PM
|
#3 |
|
Registered User
Join Date: Aug 2014
Location: Lake Tawakoni, East Texas
Posts: 39
|
Re: Can I pull out a Saginaw with the bell housing attached?
Thanks I appreciate it!
__________________
Thomas - '79 Stepside inline 6 |
|
|
|
|
05-27-2018, 06:07 PM
|
#4 |
|
Registered User
Join Date: Aug 2014
Location: Lake Tawakoni, East Texas
Posts: 39
|
Re: Can I pull out a Saginaw with the bell housing attached?
It came out very easy.
__________________
Thomas - '79 Stepside inline 6 |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
