The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board > The 1973 - 1991 Blazers, Jimmys, and Suburbans Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-21-2013, 06:15 PM   #1
wpotter
Registered User
 
wpotter's Avatar
 
Join Date: Feb 2009
Location: Adkins Texas
Posts: 157
91 Suburban 4wd Steering Questions? Wandering?

I am in need of some help. I have installed a new steering box and stabilizer because it seemed worn out and felt like truck was all over the place. Didnt seem to help a whole lot. What else should I check? This is my first four wheel drive so not real familiar with what wears out, or if thats just the way they are. I was thinking about replacing the pump because sometimes it steers easier than others and also getting a front end alignment. Any suggestions or help will be greatly appreciated.
__________________
Never a failure, Always a lesson!
1968 Chevy SWB Fleetside ECE 4/6 327/350
1987 Chevy V20 Scottsdale 4X4 350/400 4.10
1987 Chevy Custom Deluxe SWB 305/7004R4
1991 Suburban Silverado V1500 4X4 350/700R4
2015 Chevy Crew Cab SWB (Daily Driver) 5.3
wpotter is offline   Reply With Quote
Old 05-21-2013, 06:58 PM   #2
83GMCK2500
Registered User
 
Join Date: Sep 2009
Location: Beaverton, OR from WA State
Posts: 1,515
Re: 91 Suburban 4wd Steering Questions? Wandering?

Rag joint or coupler from the column to steering box to start with. Both rod ends of the drag link (connection from pitman arm to steering arm) and both rod ends of the tie rod (knuckle-knuckle connection).
__________________
Devin

1983 GMC High Sierra 2500, 4x4, RC/LB, 400 S.B., SM-465, NP-208, Corporate 10 bolt & 9.5" 14 bolt
1996 GMC Sierra SLE 3500 DRW, 4x4, EC/LB, Vortec 454, NV-4500, BW-4401, AAM 925 & AAM 1050
1997 GMC Sierra SLT 1500 4x4, Z71/F44, EC/SB, Vortec 350

My Introduction with my '83s History
New Daily, the '96
83GMCK2500 is offline   Reply With Quote
Old 05-30-2013, 11:17 PM   #3
Ski-me
Registered User
 
Ski-me's Avatar
 
Join Date: May 2012
Location: Colo Springs, CO
Posts: 870
Re: 91 Suburban 4wd Steering Questions? Wandering?

Check your upper and lower ball joints too.....
__________________
- Jeff

89' K5 Blazer, 2.5" lift, 35" tires
04' GMC Yukon XL, 3/4 ton, 8.1L
Ski-me is offline   Reply With Quote
Old 05-31-2013, 11:48 PM   #4
BLE 'BURBAN
In the Forgotten far North.
 
BLE 'BURBAN's Avatar
 
Join Date: Jul 2007
Location: Anchorage, Alaska
Posts: 2,627
Re: 91 Suburban 4wd Steering Questions? Wandering?

I just replaced all the ball joints, tie rods, and drag link assembly on my 3/4 ton. Made a world of differance considering the tie rods fell apart while trying to seperate them from the steering knuckles. Also replaced the front axle u-joints while I was in there.
__________________
1987 R3500 CREW CAB DUALLY (BIG RED)Acquired 06/12/2015
1990 chevy suburban V2500 5.7L
My cluster Mods-Nov 2007
overhead console Stereo install Round 2 Aug 2009
Heated/turn signal mirror upgrade
BLE 'BURBAN is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:00 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com