Blazer Ride Height - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**pound41** · 06-25-2018, 10:54 AM

Hello
I am looking for the ride height of a stock blazer Center of the Axle straight up to the lowest center part body wheel well arch. Trying to figure out how much lift is actually on my blazer

Thanks

JDSurge · 06-30-2018, 10:23 AM

Hello Pound41. I have attached a file showing the ride height of the k5 blazer. I found my blazer was a 4" lift by putting extra springs in the front and rear.
JD

hemi43 · 06-30-2018, 10:53 AM

Quote:

Originally Posted by pound41

Hello
I am looking for the ride height of a stock blazer Center of the Axle straight up to the lowest center part body wheel well arch. Trying to figure out how much lift is actually on my blazer

Thanks

Take a look at a post I made a few months ago. It has the dimensions you're looking for.

http://67-72chevytrucks.com/vboard/s...d.php?t=754525

**pound41** · 06-30-2018, 12:10 PM

hemi43
Thanks for your reply I bought a 4 inch lift and its way too high for me.
The truck was lifted when I bought it so I had no reference of stock height.
I am planning to have the new springs de arched. When you had yours done did you have any trouble with the springs being longer and harder to bolt in
Thanks

hemi43 · 06-30-2018, 08:09 PM

Quote:

Originally Posted by pound41

hemi43
Thanks for your reply I bought a 4 inch lift and its way too high for me.
The truck was lifted when I bought it so I had no reference of stock height.
I am planning to have the new springs de arched. When you had yours done did you have any trouble with the springs being longer and harder to bolt in
Thanks

None at all ! De arching a couple of inches will only lengthen the spring a fraction of an inch. As I mentioned before, replacing the springs made the biggest improvement in handling. No regrets.
For $hits & giggles I just went out and measure the height of my tailgate when opened so I could compare it to JDSurge's factory diagram. Mine measures 35" which is a huge difference from the advertised 29". I estimate my lift to be about 2" higher than stock, and the 33" tires might add another 1 1/2" which in my calculations should put me at around 32 1/2" for the tailgate height.

**pound41** · 06-30-2018, 08:23 PM

Hemi43
Thanks for your help I will get my springs done
and see how it does.

06-25-2018, 10:54 AM	#1
pound41 Registered User Join Date: Dec 2002 Location: Northern Virginia Posts: 1,267	Blazer Ride Height Hello I am looking for the ride height of a stock blazer Center of the Axle straight up to the lowest center part body wheel well arch. Trying to figure out how much lift is actually on my blazer Thanks

06-30-2018, 10:23 AM	#2
JDSurge Registered User Join Date: Oct 2014 Location: Lexington, Kentucky Posts: 67	Re: Blazer Ride Height Hello Pound41. I have attached a file showing the ride height of the k5 blazer. I found my blazer was a 4" lift by putting extra springs in the front and rear. JD Attached Images __________________

06-30-2018, 12:10 PM	#4
pound41 Registered User Join Date: Dec 2002 Location: Northern Virginia Posts: 1,267	Re: Blazer Ride Height hemi43 Thanks for your reply I bought a 4 inch lift and its way too high for me. The truck was lifted when I bought it so I had no reference of stock height. I am planning to have the new springs de arched. When you had yours done did you have any trouble with the springs being longer and harder to bolt in Thanks

06-30-2018, 08:23 PM	#6
pound41 Registered User Join Date: Dec 2002 Location: Northern Virginia Posts: 1,267	Re: Blazer Ride Height Hemi43 Thanks for your help I will get my springs done and see how it does.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.