2006 Engine noise on acceleration - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Strodder · 04-07-2009, 10:48 AM

I just bought a 2006 Silverado 2500HD with a 6.0 engine. I didn't notice it when I test drove it, but on acceleration it knocks under load. I searched the web and found there is a piston slap caused by carbon. But that knocks while idling, not on acceleration. Has anybody had this problem? It doesn't seem like a gas ping. I put high test gas in it to make sure. Any input here?

dan42 · 04-10-2009, 09:16 PM

I don't know how worried I would be about it, expecially under acceleration - it could very well be your fuel source. YOu might give the dealer a call and see what they say.

**bwood** · 04-10-2009, 09:38 PM

Our 04 HD at work does this under acceleration. I noticed it last week when I was pulling a bucket lift around.

Strodder · 04-10-2009, 10:39 PM

I brought it back to the dealer Tuesday morning. I had the Sales Manager, Service Adviser, Service Manager, and the Tech that will be working on it ride with me to hear the noise. They all heard it. I told them it has to be fully warmed up for the noise to appear. Today I went in to see the damage. Number 5 rod bearing was scored. They are replacing the crank shaft, main and rod bearings. If it threw the rod, and damaged the cylinder, they would replace the whole engine. They said the 6.0 motor is very reliable, and they never seen anything like this happen. Chevrolet is stepping up and paying for it under warranty. I'm glad to see Chevrolet, and the dealers are treating there customers better. I've been called by the General Manager a few times already to update me on the repairs. This is how they should have been from the beginning. Maybe they wouldn't be in as much trouble like they are. So far I'm happy.

Strodder · 04-23-2009, 10:43 PM

Sorry I forgot tp post what happen. It turned out to be the crank shaft. They replaced the Crank and all the bearings. I got it back, and it's OK now. No more noise. But there is still a noise in the transmission. It makes a winning noise from the planetary gears in the transmission in first gear on acceleration. They said that was normal for that transmission. I'm calling my friend that works for a Chevy Dealer to see what he says.

04-07-2009, 10:48 AM	#1
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	2006 Engine noise on acceleration I just bought a 2006 Silverado 2500HD with a 6.0 engine. I didn't notice it when I test drove it, but on acceleration it knocks under load. I searched the web and found there is a piston slap caused by carbon. But that knocks while idling, not on acceleration. Has anybody had this problem? It doesn't seem like a gas ping. I put high test gas in it to make sure. Any input here? __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

04-10-2009, 09:16 PM	#2
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: 2006 Engine noise on acceleration I don't know how worried I would be about it, expecially under acceleration - it could very well be your fuel source. YOu might give the dealer a call and see what they say. __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

04-10-2009, 09:38 PM	#3
bwood Registered User Join Date: Jan 2003 Location: Denison, Texas Posts: 1,919	Re: 2006 Engine noise on acceleration Our 04 HD at work does this under acceleration. I noticed it last week when I was pulling a bucket lift around. __________________ 1998 GMC Sierra SLE 1/2 ton 2WD 305 Vortec -Gibson Stainless Cat Back Swept Side -SS Wheels 2005 Honda CRF250R 2006 Honda CRF150F

04-10-2009, 10:39 PM	#4
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: 2006 Engine noise on acceleration I brought it back to the dealer Tuesday morning. I had the Sales Manager, Service Adviser, Service Manager, and the Tech that will be working on it ride with me to hear the noise. They all heard it. I told them it has to be fully warmed up for the noise to appear. Today I went in to see the damage. Number 5 rod bearing was scored. They are replacing the crank shaft, main and rod bearings. If it threw the rod, and damaged the cylinder, they would replace the whole engine. They said the 6.0 motor is very reliable, and they never seen anything like this happen. Chevrolet is stepping up and paying for it under warranty. I'm glad to see Chevrolet, and the dealers are treating there customers better. I've been called by the General Manager a few times already to update me on the repairs. This is how they should have been from the beginning. Maybe they wouldn't be in as much trouble like they are. So far I'm happy. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT* Last edited by Strodder; 04-10-2009 at 10:41 PM.

04-23-2009, 10:43 PM	#5
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: 2006 Engine noise on acceleration Sorry I forgot tp post what happen. It turned out to be the crank shaft. They replaced the Crank and all the bearings. I got it back, and it's OK now. No more noise. But there is still a noise in the transmission. It makes a winning noise from the planetary gears in the transmission in first gear on acceleration. They said that was normal for that transmission. I'm calling my friend that works for a Chevy Dealer to see what he says. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT* Last edited by Strodder; 04-23-2009 at 10:44 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.