One piece drive shaft - The 1947 - Present Chevrolet & GMC Truck Message Board Network

90\87Formula · 11-13-2009, 05:11 PM

Is is common for an '87 GMC Suburban to have a one-piece driveshaft?

It's equipped with a TBI 350 with 700r4 trans. 2 wheel drive, 1/2 ton.
I have a 90 and had an 85, and they both were/are equipped with a 2 piece DS, both 350s with the 700r4, 2 wheel drive, 1/2 tons.

rcbildr · 11-13-2009, 06:24 PM

Is it 2wd or 4x4? Both my 4x4 Burbs have a one piece drive shaft and the two 2wd Burbs I've had came with a 2 piece drive shaft.

90\87Formula · 11-13-2009, 07:23 PM

Quote:

Originally Posted by rcbildr

Is it 2wd or 4x4? Both my 4x4 Burbs have a one piece drive shaft and the two 2wd Burbs I've had came with a 2 piece drive shaft.

It's 2wd.

**texassquarebodies** · 11-13-2009, 07:50 PM

I have seen alot of burbs,,,,2wd.....all 2 piece.

72 CustomCamper · 11-13-2009, 08:37 PM

I was at the junkyard 3 days pulling a trans out of an 87 burb. 1/2 ton 2wd 350 w/ 700r4 trans. The truck had a 1 piece shaft in it...

Chuck

Daggar · 11-13-2009, 09:07 PM

1987 was my old burb. Same config. 1 piece driveshaft

JEM · 11-13-2009, 09:30 PM

Quote:

Originally Posted by rcbildr

Is it 2wd or 4x4? Both my 4x4 Burbs have a one piece drive shaft and the two 2wd Burbs I've had came with a 2 piece drive shaft.

Maybe GM was running short of 2pc shafts in '87. My '91 2500 is a 2pc.

I wonder what the critical RPM is on a one-piece shaft as long as the one in a Sub.

rcbildr · 11-16-2009, 06:27 PM

Both of my 2wd (82 and 84) burbs were 3/4 ton. Maybe that might be a factor.

Damien · 11-17-2009, 12:17 PM

A suburban has the same wheel base as a long box pickup (137.5 in), so it shouldn't be all that uncommon to see a one piece drive shaft.

72 CustomCamper · 11-17-2009, 11:53 PM

Quote:

Originally Posted by Damien

A suburban has the same wheel base as a long box pickup (137.5 in), so it shouldn't be all that uncommon to see a one piece drive shaft.

Nope. A suburban has a 129.5 inch wheelbase. The long bed pickup is 131.5 inch...

Chuck

87 dually burb · 11-17-2009, 11:58 PM

I think it is where it was built cause my 77 had a 1 pc
but my 91 and 87 both 2 pc

11-13-2009, 05:11 PM	#1
90\87Formula Registered User $90\87Formula's Avatar$ Join Date: Oct 2000 Location: Abilene Texas Posts: 1,756	One piece drive shaft Is is common for an '87 GMC Suburban to have a one-piece driveshaft? It's equipped with a TBI 350 with 700r4 trans. 2 wheel drive, 1/2 ton. I have a 90 and had an 85, and they both were/are equipped with a 2 piece DS, both 350s with the 700r4, 2 wheel drive, 1/2 tons. __________________ Robert Member 1532 Last edited by 90\87Formula; 11-13-2009 at 07:27 PM.
$90\87Formula is offline$

11-13-2009, 06:24 PM	#2
rcbildr Registered User Join Date: Sep 2000 Location: Gold Bar, WA Posts: 1,216	Re: One piece drive shaft Is it 2wd or 4x4? Both my 4x4 Burbs have a one piece drive shaft and the two 2wd Burbs I've had came with a 2 piece drive shaft. __________________ My Projects: 1960 GMC 1/2ton with 305 V6 (daily driver) 1963 Chevy 1/2ton 2wd...converting to 4x4 1967 Suburban 1/2ton 2wd My Girlfriends Projects 1985 Chevy Suburban 3/4ton 4x4 with 6.2L diesel, 4" lift, converted to TH-400, Warn Premium manual hubs, & Wildcat 315/75/R16 tires. (daily driver) 1978 Camaro Type LT with a Marine 350 & vortec heads, Rochester Carb, & roller cam 1978 Camaro Z28

11-13-2009, 07:50 PM	#4
texassquarebodies Truck Nut Join Date: Jun 2007 Location: Wills Point, Texas Posts: 407	Re: One piece drive shaft I have seen alot of burbs,,,,2wd.....all 2 piece. __________________ Tony Kee Texas Square Bodies

11-13-2009, 08:37 PM	#5
72 CustomCamper huh ??? Join Date: Nov 2002 Location: Fredericksburg,Va. Posts: 3,369	Re: One piece drive shaft I was at the junkyard 3 days pulling a trans out of an 87 burb. 1/2 ton 2wd 350 w/ 700r4 trans. The truck had a 1 piece shaft in it... Chuck __________________ 90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!"

11-13-2009, 09:07 PM	#6
Daggar Registered User Join Date: May 2007 Location: Calgary, Alberta, Canada Posts: 42	Re: One piece drive shaft 1987 was my old burb. Same config. 1 piece driveshaft __________________ 1999 Chevrolet Suburban 2500 4x4 - 454, 4L80E and lots of other fun options 1967 Chevrolet C10 Longbox Stepside - Restored 1991 Chevrolet Suburban 2500 4x4 - 350, 4L80E - Not dead but severly crippled 1987 GMC Suburban 1500 - Now some retired guy's trailer hauler 1992 Lumina Z34 - I'll miss that PITA

11-16-2009, 06:27 PM	#8
rcbildr Registered User Join Date: Sep 2000 Location: Gold Bar, WA Posts: 1,216	Re: One piece drive shaft Both of my 2wd (82 and 84) burbs were 3/4 ton. Maybe that might be a factor. __________________ My Projects: 1960 GMC 1/2ton with 305 V6 (daily driver) 1963 Chevy 1/2ton 2wd...converting to 4x4 1967 Suburban 1/2ton 2wd My Girlfriends Projects 1985 Chevy Suburban 3/4ton 4x4 with 6.2L diesel, 4" lift, converted to TH-400, Warn Premium manual hubs, & Wildcat 315/75/R16 tires. (daily driver) 1978 Camaro Type LT with a Marine 350 & vortec heads, Rochester Carb, & roller cam 1978 Camaro Z28

11-17-2009, 12:17 PM	#9
Damien Registered User Join Date: Mar 2007 Location: Farmington, MN Posts: 928	Re: One piece drive shaft A suburban has the same wheel base as a long box pickup (137.5 in), so it shouldn't be all that uncommon to see a one piece drive shaft. __________________ I can still count my vehicles on two... wait three hands.

11-17-2009, 11:58 PM	#11
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: One piece drive shaft I think it is where it was built cause my 77 had a 1 pc but my 91 and 87 both 2 pc __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.