Here we go!!! - Page 49 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RRC · 07-09-2016, 11:30 PM

Out at the campground.....

mud.man.rj · 07-11-2016, 07:57 PM

Ya you can't fit that beer under the bumper unless you dig a hole 1st, sits just right.

gringoloco · 07-13-2016, 11:36 AM

So nice!

RRC · 07-18-2016, 02:50 PM

Back in it's spot..... Now to install the wiring harness

1stchevy · 07-19-2016, 02:05 AM

I love this truck! Keep digging brother you're doing a great job!!!

saxart · 07-19-2016, 06:56 AM

Wow! Are the rockers and lower fenders on that truck literally touching the ground? I'm not usually much for lowered trucks, but this thing is freaking amazing!

boostedc10 · 07-19-2016, 07:24 AM

Russ that thing looks killer, cant wait to see it painted!

RRC · 07-19-2016, 08:31 PM

Quote:

Originally Posted by 1stchevy

I love this truck! Keep digging brother you're doing a great job!!!

Quote:

Originally Posted by saxart

Wow! Are the rockers and lower fenders on that truck literally touching the ground? I'm not usually much for lowered trucks, but this thing is freaking amazing!

Quote:

Originally Posted by boostedc10

Russ that thing looks killer, cant wait to see it painted!

Thanks Guys!!!

7wolf · 08-02-2016, 09:21 PM

Finally finished reading this whole thing. Great job so far! How's the wiring coming?

RRC · 08-03-2016, 07:58 PM

Quote:

Originally Posted by 7wolf

Finally finished reading this whole thing. Great job so far! How's the wiring coming?

Thanks

The wiring is going

RRC · 08-08-2016, 11:02 PM

Mounted the coil packs and ran some wires.... Should be able to fire it up soon

RRC · 08-08-2016, 11:06 PM

Drivers side coil packs.....

gringoloco · 08-09-2016, 11:53 AM

Very hidden. Like it!

Sicksty8 · 08-09-2016, 09:51 PM

It took me a while but I finally read thru the whole thread. I'm in love with the attention to detail you're taking on this build. Absolutely stunning. Keep on givin er and I'm sub'd for sure

RRC · 09-22-2016, 09:46 PM

Laided out on the Tarmac at CFB 15 wing Moose Jaw

Zoomin · 09-22-2016, 09:52 PM

Uh, I see some daylight.

Looks great!!

mud.man.rj · 09-23-2016, 04:25 PM

Well it's so low you won't have to worry about low flying aircraft.

gringoloco · 09-23-2016, 08:28 PM

If it was my truck, I wouldn't be in any rush to paint it. Dig it just the way it is

RRC · 09-24-2016, 07:19 PM

Quote:

Originally Posted by Zoomin

Uh, I see some daylight.

Looks great!!

Quote:

Originally Posted by mud.man.rj

Well it's so low you won't have to worry about low flying aircraft.

Quote:

Originally Posted by gringoloco

If it was my truck, I wouldn't be in any rush to paint it. Dig it just the way it is

Thanks Guys!!!

Bennett68C10 · 09-25-2016, 08:47 AM

Looks great Russ

zammer · 10-14-2016, 02:26 AM

Killer truck! Next time im around moose jaw Id love to see it.
In the summer of course haha. I bet the roads there make that truck jump when you are cruising around

RRC · 10-16-2016, 08:29 PM

Quote:

Originally Posted by zammer

Killer truck! Next time im around moose jaw Id love to see it.
In the summer of course haha. I bet the roads there make that truck jump when you are cruising around

Thanks!! For sure stop by if your in these parts

RRC · 10-16-2016, 08:42 PM

Random pic from a show.....

RRC · 10-16-2016, 08:44 PM

New and old combined....

zammer · 10-16-2016, 10:41 PM

Awesome gauges. Just noticed your lic plate sig ~ perfect

07-09-2016, 11:30 PM	#1201
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: Here we go!!! Out at the campground..... Attached Images __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=563712 Instagram: http://instagram.com/rockylakekustoms Rocky Lake Kustoms Russ

07-11-2016, 07:57 PM	#1202
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: Here we go!!! Ya you can't fit that beer under the bumper unless you dig a hole 1st, sits just right. __________________ 1987 Green n Green machine. 5.0 4spd std. 7" lift w 35's.

07-13-2016, 11:36 AM	#1203
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: Here we go!!! So nice! __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

07-18-2016, 02:50 PM	#1204
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: Here we go!!! Back in it's spot..... Now to install the wiring harness Attached Images __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=563712 Instagram: http://instagram.com/rockylakekustoms Rocky Lake Kustoms Russ

07-19-2016, 02:05 AM	#1205
1stchevy Registered User Join Date: Jan 2010 Location: Randleman, NC Posts: 785	Re: Here we go!!! I love this truck! Keep digging brother you're doing a great job!!!

07-19-2016, 06:56 AM	#1206
saxart Registered User Join Date: Aug 2012 Location: St. Croix River Valley, WI Posts: 795	Re: Here we go!!! Wow! Are the rockers and lower fenders on that truck literally touching the ground? I'm not usually much for lowered trucks, but this thing is freaking amazing!

07-19-2016, 07:24 AM	#1207
boostedc10 Registered User Join Date: Oct 2012 Location: Detroit Posts: 748	Re: Here we go!!! Russ that thing looks killer, cant wait to see it painted! __________________ Brandon Instagram: DRVFSTR Current Project: Beatrix - 1967 SWB LQ4/78mm Turbo/4L80e/ on bags Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=634691

08-02-2016, 09:21 PM	#1209
7wolf Registered User Join Date: Sep 2014 Location: Smyrna, GA Posts: 20	Re: Here we go!!! Finally finished reading this whole thing. Great job so far! How's the wiring coming?

08-08-2016, 11:02 PM	#1211
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: Here we go!!! Mounted the coil packs and ran some wires.... Should be able to fire it up soon Attached Images __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=563712 Instagram: http://instagram.com/rockylakekustoms Rocky Lake Kustoms Russ

08-08-2016, 11:06 PM	#1212
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: Here we go!!! Drivers side coil packs..... Attached Images __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=563712 Instagram: http://instagram.com/rockylakekustoms Rocky Lake Kustoms Russ

08-09-2016, 11:53 AM	#1213
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: Here we go!!! Very hidden. Like it! __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

08-09-2016, 09:51 PM	#1214
Sicksty8 Registered User Join Date: Jun 2015 Location: Winnipeg, Mb Posts: 137	Re: Here we go!!! It took me a while but I finally read thru the whole thread. I'm in love with the attention to detail you're taking on this build. Absolutely stunning. Keep on givin er and I'm sub'd for sure __________________ My 68 Build http://67-72chevytrucks.com/vboard/s...=1#post7272324 Herb! My C30 build http://67-72chevytrucks.com/vboard/s...80#post7304180

09-22-2016, 09:46 PM	#1215
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: Here we go!!! Laided out on the Tarmac at CFB 15 wing Moose Jaw Attached Images __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=563712 Instagram: http://instagram.com/rockylakekustoms Rocky Lake Kustoms Russ

09-22-2016, 09:52 PM	#1216
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: Here we go!!! Uh, I see some daylight. Looks great!! __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

09-23-2016, 04:25 PM	#1217
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: Here we go!!! Well it's so low you won't have to worry about low flying aircraft. __________________ 1987 Green n Green machine. 5.0 4spd std. 7" lift w 35's.



Register or Log In To remove these advertisements.

09-23-2016, 08:28 PM	#1218
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: Here we go!!! If it was my truck, I wouldn't be in any rush to paint it. Dig it just the way it is __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

09-25-2016, 08:47 AM	#1220
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Here we go!!! Looks great Russ __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

10-14-2016, 02:26 AM	#1221
zammer Addicted user Join Date: Sep 2009 Location: Edmonton, Alberta Posts: 369	Re: Here we go!!! Killer truck! Next time im around moose jaw Id love to see it. In the summer of course haha. I bet the roads there make that truck jump when you are cruising around __________________ 1972 2wd Blazer - 95% completed 2015 Silverado 1500 4wd -z 2008 AERO 9-7X (TBSS cousin) LS2 1970 Jimmy 4wd - future project

10-16-2016, 08:42 PM	#1223
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: Here we go!!! Random pic from a show..... Attached Images __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=563712 Instagram: http://instagram.com/rockylakekustoms Rocky Lake Kustoms Russ

10-16-2016, 08:44 PM	#1224
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: Here we go!!! New and old combined.... Attached Images __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=563712 Instagram: http://instagram.com/rockylakekustoms Rocky Lake Kustoms Russ

10-16-2016, 10:41 PM	#1225
zammer Addicted user Join Date: Sep 2009 Location: Edmonton, Alberta Posts: 369	Re: Here we go!!! Awesome gauges. Just noticed your lic plate sig ~ perfect __________________ 1972 2wd Blazer - 95% completed 2015 Silverado 1500 4wd -z 2008 AERO 9-7X (TBSS cousin) LS2 1970 Jimmy 4wd - future project

Register or Log In To remove these advertisements.