The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board > The 1973 - 1991 Blazers, Jimmys, and Suburbans Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-16-2016, 09:19 PM   #1
schpeen
Senior Member
 
schpeen's Avatar
 
Join Date: Jun 2014
Location: fort lauderdale, florida
Posts: 471
thinking about getting this in the morning

1991 owner says no rust solid truck $2500 4x4 auto 350/350

worth it right?
Attached Images
  
__________________
1965 C-10 Stepside "8 ball " a/c ps pb 350 GM Performance ZZ4 crate motor with 700R4 Dana 60
1991 Silverado K5 Blazer "9 ball" 4x4 383 Stroker 700R4 3" soft ride Super Lift with 33" KM2's on factory steelies
2016 Silverado single cab short bed p/u
2016 Lexus GS-350 white with red leather
1993 Donzi Classic 2+2 with 502 big block
2006 Mazda Miata black
schpeen is offline   Reply With Quote
Old 11-16-2016, 10:24 PM   #2
schpeen
Senior Member
 
schpeen's Avatar
 
Join Date: Jun 2014
Location: fort lauderdale, florida
Posts: 471
Re: thinking about getting this in the morning

no opinions ?? this is the last year for the K5 isn't it? not a desirable year?
__________________
1965 C-10 Stepside "8 ball " a/c ps pb 350 GM Performance ZZ4 crate motor with 700R4 Dana 60
1991 Silverado K5 Blazer "9 ball" 4x4 383 Stroker 700R4 3" soft ride Super Lift with 33" KM2's on factory steelies
2016 Silverado single cab short bed p/u
2016 Lexus GS-350 white with red leather
1993 Donzi Classic 2+2 with 502 big block
2006 Mazda Miata black
schpeen is offline   Reply With Quote
Old 11-17-2016, 02:48 AM   #3
68Timber
I know the pieces fit
 
68Timber's Avatar
 
Join Date: Nov 2007
Location: MONTGOMERY, AL
Posts: 4,908
Re: thinking about getting this in the morning

Hard to tell the condition from the pictures, that's all. Short answer, if there truly is no rust and it runs and drives good, you can't hardly go wrong. But it's in Ft Lauderdale? Check it well. I would think the salt air had got to it at least a little.
__________________
John

79 2wd Blazer (Bruiser)
85 M1009 Blazer (Sarge) build
74 Honda Z50 build
68Timber is offline   Reply With Quote
Old 11-17-2016, 07:37 AM   #4
schpeen
Senior Member
 
schpeen's Avatar
 
Join Date: Jun 2014
Location: fort lauderdale, florida
Posts: 471
Re: thinking about getting this in the morning

Quote:
Originally Posted by 68Timber View Post
Hard to tell the condition from the pictures, that's all. Short answer, if there truly is no rust and it runs and drives good, you can't hardly go wrong. But it's in Ft Lauderdale? Check it well. I would think the salt air had got to it at least a little.
yes thanks the truck is about 2.5 hours away from here in northern florida. my thoughts were the same if there really truly is little to no rust i have to buy it! Really don't want to with the turkey rod run in 2 weeks up in daytona there will be thousands of cool rides for sale but i didn't want to miss this one if it is a good solid truck. i was thinking about low dollar fix up after the last one i am still trying to hide all the receipts from the wife!
__________________
1965 C-10 Stepside "8 ball " a/c ps pb 350 GM Performance ZZ4 crate motor with 700R4 Dana 60
1991 Silverado K5 Blazer "9 ball" 4x4 383 Stroker 700R4 3" soft ride Super Lift with 33" KM2's on factory steelies
2016 Silverado single cab short bed p/u
2016 Lexus GS-350 white with red leather
1993 Donzi Classic 2+2 with 502 big block
2006 Mazda Miata black
schpeen is offline   Reply With Quote
Old 11-17-2016, 03:24 PM   #5
Ski-me
Registered User
 
Ski-me's Avatar
 
Join Date: May 2012
Location: Colo Springs, CO
Posts: 632
Re: thinking about getting this in the morning

It wouldn't come with a 350/350 from factory. Should be 700R4 with overdrive. If it's 350 tranny, that would be a 3 speed only and would also require modifications with the rest of the truck/EGM I would assume.

If it is the 700R4 then probably question other things that the seller is advertising. Misquoting info tells me the person doesn't know a lot about the truck.

90-91 have the rear wheel abs brakes and electronic speedo with an extra digit for your odometer. So it should still be ticking beyond the 100,000 mile mark.

If it's good condition, yes, $2500 is a good deal. Just look for rust from the bottom. Inside of fenders, rear inner fenders, rear tailgate area, etc.
__________________
- Jeff

89' K5 Blazer, 2.5" lift, 35" tires
04' GMC Yukon XL, 3/4 ton, 8.1L
Ski-me is offline   Reply With Quote
Old 11-17-2016, 03:37 PM   #6
Ski-me
Registered User
 
Ski-me's Avatar
 
Join Date: May 2012
Location: Colo Springs, CO
Posts: 632
Re: thinking about getting this in the morning

OK, looking at it closer, it does look like rear tailgate has rust in middle center and then painted over again. Rear window either doesn't go all the way up or isn't sealing. I see either duct tape around top and then in back inside, I see some sort of wedge. That tells me he has had leaks of some sort. Looks real good in the back inside and outside for rust....especially if the rear top has not been sealing properly.

Engine looks original and correct (abs module on master cylinder), dash looks like it has some type of rough, aftermarket type of "cap" on it, and then screwed down to the original dash (side, driver's view).

If he is also supplying extra Fenders and inner fenders, that can only tell me there is rust in there and he was planning to replace at some point. Why would he have them otherwise.

Speedo looks era correct.

3.42 gears are stock and not a power monster by any means. So any larger tire, and it will be a little sluggish. I ran 31's or 32's with 3.42's.

Just my thoughts.
__________________
- Jeff

89' K5 Blazer, 2.5" lift, 35" tires
04' GMC Yukon XL, 3/4 ton, 8.1L
Ski-me is offline   Reply With Quote
Old 11-17-2016, 08:39 PM   #7
schpeen
Senior Member
 
schpeen's Avatar
 
Join Date: Jun 2014
Location: fort lauderdale, florida
Posts: 471
Re: thinking about getting this in the morning

my wife and I took a drive up to Arcadia this morning to check it out. I laid down underneath it right away because the only thing that has been on my mind the whole time is hidden rust but to my amazement dry and clean underside and I stayed under there a while trying to find some evidence of rust anywhere and couldn't find any i did see the motor trans and transfer case all looked recently gone through. inside all the fenders and under the rockers all metal and original paint no rust ok you got my attention! The rear tailgate window lift mechanism stopped working so instead of fixing it he eased it in the up position and put duct tape all around the edges so it wouldn't drop there is no rust but there is a pretty nice dent that looks like it may prevent the window from going down anyway the interior is pretty much all there but heavily soiled and worn dash is shot and a cheap plastic shell cover sits over it back seat is in great shape along with the passenger front the driver seat is blown out in the corner but still very comfy this is a silverado pw tilt ac (not working) auto must be the 350/700r4 motor was quiet all stock but fired right up and ran smooth no smoke couldn't even tell it was running it was so smooth and shifted through the gears without any drama power windows and power mirrors work as does the horn no cracks in the windshield

only bad spot i found is above the windshield near the passenger door top edge there is a rust spot so i will take out the windshield and address that first. the front bumper is crumpled in and pulled back out but not far enough in to damage the grill so new brackets and a fresh bumper will be top on the "need" list

i drove it home doing 65-75 mph for 2.5 hours straight after filling up the 30 gallon gas tank with 28 gallons of premium and checking the oil and air pressure i was pleasantly surprised she ran nice even with the crappy unbalanced 20% left 33" tires some vibration right at 60 mph but was able to speed up to 65+ and it smoothed out somewhat brakes felt perfect and smooth oil pressure was strong and temp gauge never budged Rear diff was not happy by the time i got home so will need to address that right away as well started rubbing a few areas with some was on a rag and she is coming right back to a nice shine. I assumed it was a repaint but now that i am cleaning it up a little it all looks original. I will post up some more pics tomorrow.

thanks for looking
Attached Images
   
__________________
1965 C-10 Stepside "8 ball " a/c ps pb 350 GM Performance ZZ4 crate motor with 700R4 Dana 60
1991 Silverado K5 Blazer "9 ball" 4x4 383 Stroker 700R4 3" soft ride Super Lift with 33" KM2's on factory steelies
2016 Silverado single cab short bed p/u
2016 Lexus GS-350 white with red leather
1993 Donzi Classic 2+2 with 502 big block
2006 Mazda Miata black

Last edited by schpeen; 11-17-2016 at 08:45 PM.
schpeen is offline   Reply With Quote
Old 11-17-2016, 09:00 PM   #8
schpeen
Senior Member
 
schpeen's Avatar
 
Join Date: Jun 2014
Location: fort lauderdale, florida
Posts: 471
Re: thinking about getting this in the morning

of course my first thought was the camo is covering up rust or bondo but turned out the guy just loves camo he puts it on everything! lol I and thinking about taking it off and wet sanding and polishing the whole truck and painting the stock wheels and the roof right up to the windshield white
__________________
1965 C-10 Stepside "8 ball " a/c ps pb 350 GM Performance ZZ4 crate motor with 700R4 Dana 60
1991 Silverado K5 Blazer "9 ball" 4x4 383 Stroker 700R4 3" soft ride Super Lift with 33" KM2's on factory steelies
2016 Silverado single cab short bed p/u
2016 Lexus GS-350 white with red leather
1993 Donzi Classic 2+2 with 502 big block
2006 Mazda Miata black
schpeen is offline   Reply With Quote
Old 11-17-2016, 10:35 PM   #9
schpeen
Senior Member
 
schpeen's Avatar
 
Join Date: Jun 2014
Location: fort lauderdale, florida
Posts: 471
Re: thinking about getting this in the morning

i ordered a set of KM2 33x12.5/15 but i am thinking maybe i should have gone with the 10" width instead for less sluggish steering
__________________
1965 C-10 Stepside "8 ball " a/c ps pb 350 GM Performance ZZ4 crate motor with 700R4 Dana 60
1991 Silverado K5 Blazer "9 ball" 4x4 383 Stroker 700R4 3" soft ride Super Lift with 33" KM2's on factory steelies
2016 Silverado single cab short bed p/u
2016 Lexus GS-350 white with red leather
1993 Donzi Classic 2+2 with 502 big block
2006 Mazda Miata black
schpeen is offline   Reply With Quote
Old 11-18-2016, 01:24 AM   #10
68Timber
I know the pieces fit
 
68Timber's Avatar
 
Join Date: Nov 2007
Location: MONTGOMERY, AL
Posts: 4,908
Re: thinking about getting this in the morning

Sounds like you got a great deal then. Congrats, and keep us posted!
__________________
John

79 2wd Blazer (Bruiser)
85 M1009 Blazer (Sarge) build
74 Honda Z50 build
68Timber is offline   Reply With Quote
Old 11-18-2016, 09:06 AM   #11
Ski-me
Registered User
 
Ski-me's Avatar
 
Join Date: May 2012
Location: Colo Springs, CO
Posts: 632
Re: thinking about getting this in the morning

Quote:
Originally Posted by schpeen View Post
i ordered a set of KM2 33x12.5/15 but i am thinking maybe i should have gone with the 10" width instead for less sluggish steering
Sweet job and glad to hear it ran well. I prefer the 8" wheel width over the 10" so don't second guess it. You would tend to get some potential curb rub and skuff up the 10 wheels. 15x8 will look great.

I'd go through the brakes and be sure they are in order. The seats actually looked pretty good. Give them a good scrubbing and they will probably clean up real nice.

I got a whole new carpet set and that really helped. I think I got it from stockinteriors.com but the vendor/supplier is actually ACC. Most will come from ACC too but that's the one to get.

Check out ball joints and all steering components.

Check out driveline u-joints too. May want to replace for piece of mind.

Overall, sweet deal and congrats!!

Here is mine with 33x12.5r15 on the stock ralley 15x8's. Lift is 2.5" but yours will look pretty close to this.....
Attached Images
 
__________________
- Jeff

89' K5 Blazer, 2.5" lift, 35" tires
04' GMC Yukon XL, 3/4 ton, 8.1L
Ski-me is offline   Reply With Quote
Old 11-19-2016, 08:46 AM   #12
schpeen
Senior Member
 
schpeen's Avatar
 
Join Date: Jun 2014
Location: fort lauderdale, florida
Posts: 471
Re: thinking about getting this in the morning

Posted via Mobile Device
schpeen is offline   Reply With Quote
Old 11-19-2016, 08:50 AM   #13
schpeen
Senior Member
 
schpeen's Avatar
 
Join Date: Jun 2014
Location: fort lauderdale, florida
Posts: 471
Re: thinking about getting this in the morning

Still have the original exhaust with catalytic converter! the truck starts up immediately and runs very smooth and quiet so I am apprehensive to replace with headers on back with a more free flowing dual setup. I assume the stock 5.7 has throttle body which would be computer controlled somewhat so it will automatically adjust itself to a new exhaust??
Posted via Mobile Device
schpeen is offline   Reply With Quote
Old 11-19-2016, 08:59 AM   #14
Ski-me
Registered User
 
Ski-me's Avatar
 
Join Date: May 2012
Location: Colo Springs, CO
Posts: 632
Re: thinking about getting this in the morning

Quote:
Originally Posted by schpeen View Post
Still have the original exhaust with catalytic converter! the truck starts up immediately and runs very smooth and quiet so I am apprehensive to replace with headers on back with a more free flowing dual setup. I assume the stock 5.7 has throttle body which would be computer controlled somewhat so it will automatically adjust itself to a new exhaust??
Posted via Mobile Device
Realistically, you're not going to gain much with this engine and headers/exhaust modifications. It's just not a high horsepower rig to start with. I'd keep the stock manifolds and do a cat back type system. I installed a Flowmaster muffler and tailpipe system.

https://smile.amazon.com/Flowmaster-...9%3AFlowmaster
__________________
- Jeff

89' K5 Blazer, 2.5" lift, 35" tires
04' GMC Yukon XL, 3/4 ton, 8.1L
Ski-me is offline   Reply With Quote
Old 11-19-2016, 09:01 AM   #15
schpeen
Senior Member
 
schpeen's Avatar
 
Join Date: Jun 2014
Location: fort lauderdale, florida
Posts: 471
Re: thinking about getting this in the morning

Ok will do. Leave the 25 year old cat on? I'm not looking for a speed demon. I have one of those already. Lol
Posted via Mobile Device
schpeen is offline   Reply With Quote
Old 11-19-2016, 09:39 AM   #16
Ski-me
Registered User
 
Ski-me's Avatar
 
Join Date: May 2012
Location: Colo Springs, CO
Posts: 632
Re: thinking about getting this in the morning

Quote:
Originally Posted by schpeen View Post
Ok will do. Leave the 25 year old cat on? I'm not looking for a speed demon. I have one of those already. Lol
Posted via Mobile Device
Mine has been replaced at one point and I should replace it at some point for good measure. Is yours the large, flat, big one (original) or is it somewhat smaller (replaced at some point)?

It might be good to replace while you're in there if you do the rear exhaust all at the same time.
__________________
- Jeff

89' K5 Blazer, 2.5" lift, 35" tires
04' GMC Yukon XL, 3/4 ton, 8.1L
Ski-me is offline   Reply With Quote
Old 11-19-2016, 09:45 AM   #17
schpeen
Senior Member
 
schpeen's Avatar
 
Join Date: Jun 2014
Location: fort lauderdale, florida
Posts: 471
Re: thinking about getting this in the morning

Quote:
Originally Posted by Ski-me View Post
Mine has been replaced at one point and I should replace it at some point for good measure. Is yours the large, flat, big one (original) or is it somewhat smaller (replaced at some point)?

It might be good to replace while you're in there if you do the rear exhaust all at the same time.
yes it is the big flat one i will replace it then

thanks for the advice Jeff! very helpful info first thing this morning gives me motivation to go get dirty
__________________
1965 C-10 Stepside "8 ball " a/c ps pb 350 GM Performance ZZ4 crate motor with 700R4 Dana 60
1991 Silverado K5 Blazer "9 ball" 4x4 383 Stroker 700R4 3" soft ride Super Lift with 33" KM2's on factory steelies
2016 Silverado single cab short bed p/u
2016 Lexus GS-350 white with red leather
1993 Donzi Classic 2+2 with 502 big block
2006 Mazda Miata black
schpeen is offline   Reply With Quote
Old 11-19-2016, 10:19 AM   #18
Ski-me
Registered User
 
Ski-me's Avatar
 
Join Date: May 2012
Location: Colo Springs, CO
Posts: 632
Re: thinking about getting this in the morning

Quote:
Originally Posted by schpeen View Post
yes it is the big flat one i will replace it then

thanks for the advice Jeff! very helpful info first thing this morning gives me motivation to go get dirty
Any time I can spend other people's money, I jump on it!!
__________________
- Jeff

89' K5 Blazer, 2.5" lift, 35" tires
04' GMC Yukon XL, 3/4 ton, 8.1L
Ski-me is offline   Reply With Quote
Old 11-19-2016, 02:40 PM   #19
schpeen
Senior Member
 
schpeen's Avatar
 
Join Date: Jun 2014
Location: fort lauderdale, florida
Posts: 471
Re: thinking about getting this in the morning

got a delivery from the land shark looks like i will be sanding wheels today. I pulled all 4 off and I will take them over to the nearby shop and get them broken down so i can clean them up and primer today
Attached Images
 
__________________
1965 C-10 Stepside "8 ball " a/c ps pb 350 GM Performance ZZ4 crate motor with 700R4 Dana 60
1991 Silverado K5 Blazer "9 ball" 4x4 383 Stroker 700R4 3" soft ride Super Lift with 33" KM2's on factory steelies
2016 Silverado single cab short bed p/u
2016 Lexus GS-350 white with red leather
1993 Donzi Classic 2+2 with 502 big block
2006 Mazda Miata black
schpeen is offline   Reply With Quote
Old 11-19-2016, 09:16 AM   #20
schpeen
Senior Member
 
schpeen's Avatar
 
Join Date: Jun 2014
Location: fort lauderdale, florida
Posts: 471
Re: thinking about getting this in the morning

does anyone sell the wind visors on the side windows of the cap? mine are both missing
__________________
1965 C-10 Stepside "8 ball " a/c ps pb 350 GM Performance ZZ4 crate motor with 700R4 Dana 60
1991 Silverado K5 Blazer "9 ball" 4x4 383 Stroker 700R4 3" soft ride Super Lift with 33" KM2's on factory steelies
2016 Silverado single cab short bed p/u
2016 Lexus GS-350 white with red leather
1993 Donzi Classic 2+2 with 502 big block
2006 Mazda Miata black
schpeen is offline   Reply With Quote
Old 11-19-2016, 09:37 AM   #21
Ski-me
Registered User
 
Ski-me's Avatar
 
Join Date: May 2012
Location: Colo Springs, CO
Posts: 632
Re: thinking about getting this in the morning

Quote:
Originally Posted by schpeen View Post
does anyone sell the wind visors on the side windows of the cap? mine are both missing
Yea, I saw that. I'm not aware of any place just for those vents. What you need to find is a good junkyard (Pick n Pull) type place. You'll be amazed what you can find if you keep your eyes open. Molding, trim pieces, etc. This is going to be a good source for you.

I'll look at mine and see if they are easy to remove by themselves. Don't recall if you need the whole side window as an assembly or not. Just keep your eyes peeled for a either a canopy with the rear sliders intact or someone selling just the side windows themselves. Either way, you can swap them into your existing canopy pretty easily.

I just replaced my front door felts/sweeps from 1A Auto. Turned out great. My next set will be the rear tailgate and fiberglass insert for rear window.
__________________
- Jeff

89' K5 Blazer, 2.5" lift, 35" tires
04' GMC Yukon XL, 3/4 ton, 8.1L
Ski-me is offline   Reply With Quote
Old 11-19-2016, 09:49 AM   #22
schpeen
Senior Member
 
schpeen's Avatar
 
Join Date: Jun 2014
Location: fort lauderdale, florida
Posts: 471
Re: thinking about getting this in the morning

Quote:
Originally Posted by Ski-me View Post
Yea, I saw that. I'm not aware of any place just for those vents. What you need to find is a good junkyard (Pick n Pull) type place. You'll be amazed what you can find if you keep your eyes open. Molding, trim pieces, etc. This is going to be a good source for you.

I'll look at mine and see if they are easy to remove by themselves. Don't recall if you need the whole side window as an assembly or not. Just keep your eyes peeled for a either a canopy with the rear sliders intact or someone selling just the side windows themselves. Either way, you can swap them into your existing canopy pretty easily.

I just replaced my front door felts/sweeps from 1A Auto. Turned out great. My next set will be the rear tailgate and fiberglass insert for rear window.
they have set screws holding them in so should be easy install when i find them I have found mall parking lots to be a great source for parts as well! lol (kidding of course) or am I ? lol
__________________
1965 C-10 Stepside "8 ball " a/c ps pb 350 GM Performance ZZ4 crate motor with 700R4 Dana 60
1991 Silverado K5 Blazer "9 ball" 4x4 383 Stroker 700R4 3" soft ride Super Lift with 33" KM2's on factory steelies
2016 Silverado single cab short bed p/u
2016 Lexus GS-350 white with red leather
1993 Donzi Classic 2+2 with 502 big block
2006 Mazda Miata black
schpeen is offline   Reply With Quote
Old 11-20-2016, 11:27 AM   #23
Ski-me
Registered User
 
Ski-me's Avatar
 
Join Date: May 2012
Location: Colo Springs, CO
Posts: 632
Re: thinking about getting this in the morning

Those are great tires, had them before this set. Very quiet for a mud tire.

A little paint cleanup on wheels will go a long way, too.

If you can find the chrome trim rings, that will dress it up just a bit more and cover any of the teeth marks you see on the outside edge of rim.
__________________
- Jeff

89' K5 Blazer, 2.5" lift, 35" tires
04' GMC Yukon XL, 3/4 ton, 8.1L
Ski-me is offline   Reply With Quote
Old 11-20-2016, 11:51 AM   #24
schpeen
Senior Member
 
schpeen's Avatar
 
Join Date: Jun 2014
Location: fort lauderdale, florida
Posts: 471
Re: thinking about getting this in the morning

Quote:
Originally Posted by Ski-me View Post
Those are great tires, had them before this set. Very quiet for a mud tire.

A little paint cleanup on wheels will go a long way, too.

If you can find the chrome trim rings, that will dress it up just a bit more and cover any of the teeth marks you see on the outside edge of rim.
I always ran the KM2's on my jeeps best tires out there imo yes i have plenty on my "need list" Daytona Turkey run is next week and they have a giant flea market for parts so it's just a matter of how much do you want to spend! I'm like a kid in a candy store there.

been sanding and priming the wheels funny i have changed my mind 10 times about color combos but i always go back to the blue with a white top and white wheels so i am painting the wheels white (for now)

instead of the trim rings i was thinking of going with the dog bowl small caps and a plain white wheel but again i have't committed to it yet! lol
__________________
1965 C-10 Stepside "8 ball " a/c ps pb 350 GM Performance ZZ4 crate motor with 700R4 Dana 60
1991 Silverado K5 Blazer "9 ball" 4x4 383 Stroker 700R4 3" soft ride Super Lift with 33" KM2's on factory steelies
2016 Silverado single cab short bed p/u
2016 Lexus GS-350 white with red leather
1993 Donzi Classic 2+2 with 502 big block
2006 Mazda Miata black
schpeen is offline   Reply With Quote
Old 11-21-2016, 08:46 AM   #25
schpeen
Senior Member
 
schpeen's Avatar
 
Join Date: Jun 2014
Location: fort lauderdale, florida
Posts: 471
Re: thinking about getting this in the morning

can not stop smiling I have always wanted a blazer since my buddy in HS had a 72' back in 1982
Attached Images
  
__________________
1965 C-10 Stepside "8 ball " a/c ps pb 350 GM Performance ZZ4 crate motor with 700R4 Dana 60
1991 Silverado K5 Blazer "9 ball" 4x4 383 Stroker 700R4 3" soft ride Super Lift with 33" KM2's on factory steelies
2016 Silverado single cab short bed p/u
2016 Lexus GS-350 white with red leather
1993 Donzi Classic 2+2 with 502 big block
2006 Mazda Miata black
schpeen is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:32 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 1997-2013 67-72chevytrucks.com