|
02-08-2023, 04:21 PM
|
#1 |
|
Registered User
Join Date: Aug 2018
Location: Houston, TX
Posts: 34
|
Flatbed wood
Those of y'all with flatbeds on your trucks...can you show some pics of how your wood is arranged / supported within the frame? My '63 C30 is going to need a complete rework, so I'm looking for inspiration.
|
|
|
|
02-10-2023, 07:22 AM
|
#2 |
|
Moderator
  
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
|
Re: Flatbed wood
A link to our years beds - http://67-72chevytrucks.com/vboard/s...d.php?t=505409
Here is a sweet bed - http://67-72chevytrucks.com/vboard/s...d.php?t=592558
__________________
Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? |
|
|
|
|
02-11-2023, 12:27 AM
|
#3 | |
|
Registered User
Join Date: Aug 2017
Location: Santa Barbara, CA
Posts: 205
|
Re: Flatbed wood
Quote:
http://67-72chevytrucks.com/vboard/s...768827&page=10
__________________
1960 C-10 Apache- "Rusty the Redneck Reject"
1/2 Ton short bed step side. 350 crate motor, 3 speed manual (floor shifted) MKII - Buddy Buckets and Glass Packs 20+ year long term project in process Lots of Rust, more memories... |
|
|
|
|
|
02-13-2023, 11:23 PM
|
#4 |
|
Senior Member
 
Join Date: Aug 2011
Location: Reno, Nv.
Posts: 1,424
|
Re: Flatbed wood
Don't have any pictures of frame under wood, this is the original wood. It was covered with pieces of plywood nailed down and a cattle rack on top.
__________________
1927 Willy's Knight 24,000 original miles, 1958 Impala 283/Powerglide, 1964 C-30 383/4 speed, 1971 Monte Carlo 350/350, 1972 GMC K2500 350/350, 1976 Chev. K10 350/350, 2006 GMC Sierra 2500HD LBZ Duramax/Allison, 2006 Chev. Silverado K3500 LBZ Duramax/Allison |
|
|
|
|
02-14-2023, 01:03 AM
|
#5 |
|
Registered User
Join Date: Jun 2011
Location: Central OR
Posts: 652
|
Re: Flatbed wood
You should have cross rails that the wood is screwed to.
You can get deck screws from an 18 wheeler place like Utility Trailer in Houston. https://www.napaonline.com/en/p/RFDTF120 Get some that are long enough to go through your wood and into the top rail of the cross members. The cross members are usually C shaped formed sheet metal or angle iron. You drill a pilot hole and then screw in the deck screw. Up here we use 2X6 tongue and groove Doug Fir. Do your odd size boards on the sides. Rip up the old boards and hit the remainder of the old screws with a hammer to break them off even with the cross rails. I am going to do mine this spring. Have the boards and Hdw. ready to go.
__________________
1955 GMC 250 8 Flatbed 1971 C30 157" 350 4spd 10' Flatbed 81 GMC K30 CnC 9' Flatbed 454 T400 89 GMC Jimmy Stock https://67-72chevytrucks.com/vboard/...d.php?t=810958 71 LT1 Convertible, 72 Coupe 69 CJ5, 75 CJ6, 67 M715, 72 M35A2 Bobbed, 95 XLC2 |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
