my 64 build now with a dropmember - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

///Juan-SoCal · 12-03-2008, 10:02 PM

Looking really good Jeff!!! Can't wait to see more progress.

Alan's Classic · 12-04-2008, 01:03 AM

Subscribed!! Keep up the great work.

98L150 · 12-06-2008, 08:22 PM

got a little done today. got the rear bag mounts made and installed. need to gussted the lower bagg mounts onthe trailing arm and then a little clean up withthe grinder and she should be done, then move on to the next area steering column and gas tank, comp and air ride tank mounting.

Take2 · 12-07-2008, 12:56 PM

Looks Good Jeff !!!

98L150 · 01-20-2009, 12:15 PM

well i have been woring on it and thought i would posy an update. got the steering column installed and steering hooked up to the rack, brake booster installed, battery drop box installed, gauge cluster mocked up, tranny tunnel made and fit, all the shocks are installed, fuel tank assembly is complete and many other samll details have been done. geting closer for tear dwon for paint and then reassembly to fianlly drive this thing again

Bazooka · 01-20-2009, 02:17 PM

Nice project going to be nice. What headers are those?

joe231 · 02-07-2009, 09:59 AM

very nice work!!
what kinda tank is that?
you custom build it? steel?

custom63 · 02-07-2009, 01:51 PM

What did you use for that sweet gauge setup? Back plate, paint, etc?

98L150 · 02-19-2009, 10:15 AM

Custom63,

the guage set up is mooneye gauges installed in the guage cluster kit i got from www.fastlanewest.com they advertise in Goodguys Magazine.

Ive made a lilttle more progress on the truck. got the tow boards and tunnel tacked into place, got a vintage looking reproduce underdash air conditioning / heater unit, installed a new core support and set the hood on the truck. next step in to get the hood hinges & bed mounted so we can tear this ting down for paint and body work. Here are a few pictures.

hammered65 · 02-19-2009, 12:31 PM

Looking good. Where are you going to have it painted?

98L150 · 02-19-2009, 02:44 PM

I will do the paint myself at the house. right now all we are going to do is get the chassis and entire engine compartment and interior painted and then get it driving then worry about the exterior later on this year.

Quote:

Originally Posted by hammered65

Looking good. Where are you going to have it painted?

protrash64 · 02-19-2009, 03:01 PM

.......looking really nice. Glad to see an update.

Bazooka · 02-19-2009, 03:29 PM

Quote:

Originally Posted by Bazooka

Nice project going to be nice. What headers are those?

Are those the Sandersons from ECE??

98L150 · 02-19-2009, 09:24 PM

headers are from ebay that are for chevelle. paid 200 for the brand new

Quote:

Originally Posted by Bazooka

Are those the Sandersons from ECE??

98L150 · 03-01-2009, 11:29 AM

got a little more detail work done on chassis saturday and set the bed on to start making this thing to start to look like a truck. a few more weeks and we can tear down for paint on the chassis and engine compartment and then get this thing driving

98L150 · 03-01-2009, 11:32 AM

i got the tanks for so cal speed shop about 3 or 4 yrs ago. I beleived it is from Tanks Inc if i am not mistaken.

Quote:

Originally Posted by joe231

very nice work!!
what kinda tank is that?
you custom build it? steel?

joe231 · 03-01-2009, 11:35 AM

very nice!!!

Dinos63 · 03-01-2009, 11:42 AM

duuuuude thats lookin killer

greens69 · 03-01-2009, 07:46 PM

We have come a long way in the past 3 months, not too much longer and you will be driving it finally.....

98L150 · 03-30-2009, 09:46 AM

well the truck is getting a little closer. got my hood hinge mounting kit from Porterbuilt and got te hood opening with hinges now

All I need to do now is make the 1-1/2" round tube brace bars that go from the firewall hinge mount to the core support. If you look at some of the pics you can see the areas of the lower hingle bar that I had to trim so it would lay out. it touches the tire when layed out but works great.

98L150 · 03-30-2009, 09:46 AM

here are a few more pics fo the kit:

Joey~AP · 03-30-2009, 11:12 AM

Nice!

Bazooka · 03-30-2009, 12:26 PM

Looks good. I'm curious about the tire size your running. What size are they? I'm thinking about getting some of Nate's hood hinge brackets...

98L150 · 03-30-2009, 12:36 PM

I'm not sure onthe tire size as they are some only take offs that I have, but they are 27" tall the same as a 255/30-20.

Quote:

Originally Posted by Bazooka

Looks good. I'm curious about the tire size your running. What size are they? I'm thinking about getting some of Nate's hood hinge brackets...

jgh64pkup · 03-30-2009, 12:48 PM

do you have a website where you got your hinge kit

12-03-2008, 10:02 PM	#26
///Juan-SoCal Registered User Join Date: Nov 2007 Location: Whittier, CA Posts: 36	Re: my 64 build now with a dropmember Looking really good Jeff!!! Can't wait to see more progress. __________________ ///Relaxed Atmosphere http://www.hubgarage.com/mygarage/RelaxedAtmosphere 1965 Chevrolet Carryall 1997 Chevrolet S-10

12-04-2008, 01:03 AM	#27
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: my 64 build now with a dropmember Subscribed!! Keep up the great work. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

12-06-2008, 08:22 PM	#28
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	Re: my 64 build now with a dropmember got a little done today. got the rear bag mounts made and installed. need to gussted the lower bagg mounts onthe trailing arm and then a little clean up withthe grinder and she should be done, then move on to the next area steering column and gas tank, comp and air ride tank mounting. Attached Images __________________ 72 Suburban 64 Chevy short fleet 04 Chevy Colorado Sport Reg Cab 2012 Chevy Avalanche 2003 Chevy S10 Blazer Xtreme http://www.hubgarage.com/mygarage/RA_Jeff 64 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=295915

12-07-2008, 12:56 PM	#29
Take2 Registered User Join Date: Jun 2008 Location: Spring Posts: 43	Re: my 64 build now with a dropmember Looks Good Jeff !!!

01-20-2009, 12:15 PM	#30
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	Re: my 64 build now with a dropmember well i have been woring on it and thought i would posy an update. got the steering column installed and steering hooked up to the rack, brake booster installed, battery drop box installed, gauge cluster mocked up, tranny tunnel made and fit, all the shocks are installed, fuel tank assembly is complete and many other samll details have been done. geting closer for tear dwon for paint and then reassembly to fianlly drive this thing again Attached Images __________________ 72 Suburban 64 Chevy short fleet 04 Chevy Colorado Sport Reg Cab 2012 Chevy Avalanche 2003 Chevy S10 Blazer Xtreme http://www.hubgarage.com/mygarage/RA_Jeff 64 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=295915

01-20-2009, 02:17 PM	#31
Bazooka Keepin it old school Join Date: Jul 2008 Location: Ca Posts: 672	Re: my 64 build now with a dropmember Nice project going to be nice. What headers are those? Last edited by Bazooka; 01-20-2009 at 02:18 PM.

02-07-2009, 09:59 AM	#32
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: my 64 build now with a dropmember very nice work!! what kinda tank is that? you custom build it? steel? __________________ *CHEVY ONLY* Last edited by joe231; 02-08-2009 at 12:28 AM.

02-07-2009, 01:51 PM	#33
custom63 Registered User Join Date: Oct 2008 Location: Auburn, Ca. Posts: 171	Re: my 64 build now with a dropmember What did you use for that sweet gauge setup? Back plate, paint, etc?

02-19-2009, 10:15 AM	#34
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	Re: my 64 build now with a dropmember Custom63, the guage set up is mooneye gauges installed in the guage cluster kit i got from www.fastlanewest.com they advertise in Goodguys Magazine. Ive made a lilttle more progress on the truck. got the tow boards and tunnel tacked into place, got a vintage looking reproduce underdash air conditioning / heater unit, installed a new core support and set the hood on the truck. next step in to get the hood hinges & bed mounted so we can tear this ting down for paint and body work. Here are a few pictures. Attached Images __________________ 72 Suburban 64 Chevy short fleet 04 Chevy Colorado Sport Reg Cab 2012 Chevy Avalanche 2003 Chevy S10 Blazer Xtreme http://www.hubgarage.com/mygarage/RA_Jeff 64 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=295915

02-19-2009, 12:31 PM	#35
hammered65 Registered User Join Date: Jan 2007 Location: Houston Posts: 53	Re: my 64 build now with a dropmember Looking good. Where are you going to have it painted?

02-19-2009, 03:01 PM	#37
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,519	Re: my 64 build now with a dropmember .......looking really nice. Glad to see an update. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

03-01-2009, 11:29 AM	#40
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	Re: my 64 build now with a dropmember got a little more detail work done on chassis saturday and set the bed on to start making this thing to start to look like a truck. a few more weeks and we can tear down for paint on the chassis and engine compartment and then get this thing driving Attached Images __________________ 72 Suburban 64 Chevy short fleet 04 Chevy Colorado Sport Reg Cab 2012 Chevy Avalanche 2003 Chevy S10 Blazer Xtreme http://www.hubgarage.com/mygarage/RA_Jeff 64 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=295915

03-01-2009, 11:35 AM	#42
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: my 64 build now with a dropmember very nice!!! __________________ *CHEVY ONLY*

03-01-2009, 11:42 AM	#43
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: my 64 build now with a dropmember duuuuude thats lookin killer __________________ CHEVY ONLY... Nothin Else !

03-01-2009, 07:46 PM	#44
greens69 Registered User Join Date: Oct 2000 Location: Tomball,Texas USA Posts: 324	Re: my 64 build now with a dropmember We have come a long way in the past 3 months, not too much longer and you will be driving it finally..... __________________ Houston and Dallas Autorama Show Chairman ///Relaxed Atmosphere 1969 Chevrolet C10 1972 Chevrolet 2WD Blazer 1987 GMC Sierra



Register or Log In To remove these advertisements.

03-30-2009, 09:46 AM	#45
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	Re: my 64 build now with a dropmember well the truck is getting a little closer. got my hood hinge mounting kit from Porterbuilt and got te hood opening with hinges now All I need to do now is make the 1-1/2" round tube brace bars that go from the firewall hinge mount to the core support. If you look at some of the pics you can see the areas of the lower hingle bar that I had to trim so it would lay out. it touches the tire when layed out but works great. Attached Images __________________ 72 Suburban 64 Chevy short fleet 04 Chevy Colorado Sport Reg Cab 2012 Chevy Avalanche 2003 Chevy S10 Blazer Xtreme http://www.hubgarage.com/mygarage/RA_Jeff 64 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=295915

03-30-2009, 11:12 AM	#47
Joey~AP TexasBowhunter Join Date: Mar 2008 Location: alvin, texas Posts: 450	Re: my 64 build now with a dropmember Nice! __________________ Build in progress for son's first truck.

03-30-2009, 12:26 PM	#48
Bazooka Keepin it old school Join Date: Jul 2008 Location: Ca Posts: 672	Re: my 64 build now with a dropmember Looks good. I'm curious about the tire size your running. What size are they? I'm thinking about getting some of Nate's hood hinge brackets...

03-30-2009, 12:48 PM	#50
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 build now with a dropmember do you have a website where you got your hinge kit __________________ Gage 1967 C10 Shortbed Stepside

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.