The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-22-2018, 09:12 AM   #26
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,749
Re: Do factory truck small blocks usually come with steel cranks?

Quote:
Originally Posted by MARKDTN View Post
Here is some info on 327s from another post. There is no large journal 327s in 67 Chevelles and thus no 4 bolt mains.
***************
This addresses small journal 4-bolt 327s, but also 1968. Here are some of the highlights:

There is no such thing as a factory 327 4-bolt main. You can build one out a large journal block, but none were ever made factory. You will not find a single instance of anybody that can prove there ever was one. Lots of "I heard they did......" but no real evidence. There are pages on Google about this and not one of them I've seen can show any documentation that they exist.

Some have claimed this with a 3892657 casting block. See http://www.nastyz28.com/sbchevy/sblock.html. Mortec says the same things. This is a 1967 only block that was SJ for 327 and 302 but '67 Camaros with 350s got the same 4" bore block with the saddles machined for a LJ crankshaft (http://www.camaros.net/forums/showthread.php?t=143669).

There were no factory built cars with 4-bolt mains until 1969. No Corvettes, Z28s, or SS350 Camaros. If there were some blocks cast in '68, I believe they were for '69 model year vehicles.

http://www.ncrs.org/forums/archive/i...p/t-85289.html
I had not keyed in that there were no 4 bolts in '68 until recently. I had always assumed that the Z28s and SS350s in '68 got them. I knew that the '68 Corvettes did not. So that makes it even less likely that a 327 ever had 4-bolt mains because in '69 the only application for 327 was Camaros and B-bodies-and it was a more base engine as both had 350 performance engines available. By 1970 the 327 was gone and the 307 and 350 was it.
So '68 Z/28s and SS350 Camaros have 2-bolt mains.
http://www.holisticpage.com/camaro/camaros/302.htm

http://www.chevy-camaro.com/faq/chev...o-faq-Z28.shtm

http://www.camaros.net/forums/showthread.php?t=164584

http://www.hotrodders.com/forum/buil...evy-57753.html

Some LJ blocks cross over boundaries. For example, the 3956618 blocks were a 2-bolt for 68-69 327, a 4 bolt for 69 Z28, and 2 or 4 for 69 350. the famous 3970010 (and 3932386) is similar, but has no 68 applications. The raw casting had enough meat in the right places to machine it with either style cap.

No SJ block ever had 4-bolt mains. No documented 4-bolt LJ 327s were built. I could see a possibility in '69 with 0010 or 2386 block, but with all my searching I have yet to find anybody that can prove they have a legit one. And as we know, you could never prove it in a truck even if it did happen because the VIN derivative is not on the engine pad.

There are rumors of Massey-Ferguson combines with 327 4-bolts. The is no evidence this ever happed. Just another part of the legend.

http://www.chevytalk.org/fusionbb/sh...hp?tid/157044/


http://www.thecombineforum.com/forum...et-engine.html

There were industrial and marine engines from Chevy (and Ford and Chrysler). MF Combines did have Chevy 327s, but they were 2 bolt mains. MF combines did get 4-bolt SB engines, but they were 350s. I still maintain 2 things:
1-there is no such thing as a factory 327 with 4-bolt mains. Ever.
2-there were no small blocks with 4-bolt mains before the 1969 model year.

If there is any proof otherwise, I would love to see it.
The thing with all that is it is 100% car guy oriented. Not a single word on trucks, other than their motors can't be verified due to no partial VIN stamped in the block. Well, that's a Camaro guy talking, and he would need that number to have any idea of what he is talking about. A truck guy who knows these things inside and out up, down, and all around is your book. No mention of the 327s used in 40-60 series trucks or pickups.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is offline   Reply With Quote
Old 02-22-2018, 09:30 AM   #27
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,749
Re: Do factory truck small blocks usually come with steel cranks?

Quote:
Originally Posted by ericfallon View Post
Problem now is you can buy a china doll steel casted crank..
Have never used one but they are said to not be cast iron.
Ah yes, those masters of metallurgy. Well, I guess now we'll have to start saying steel, cast, or China doll steel cast

I think I'll keep that one out of my vocabulary. I don't expect to use it.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Last edited by special-K; 02-22-2018 at 09:35 AM.
special-K is offline   Reply With Quote
Old 02-22-2018, 09:54 AM   #28
67 chevelle
Registered User
 
67 chevelle's Avatar
 
Join Date: May 2013
Location: WEST PALM FLORIDA
Posts: 1,174
Re: Do factory truck small blocks usually come with steel cranks?

67 and earlier small journal cranks were all forged , after opening probably 50 68 plus sbc's 4 bolt and 2 bolt , ive yet to see a forged crank in the newer sbc's
__________________
68 Long Fleet , ly6 , turbo 350 , 3-5 drop , original paint , front discs
67 Small window , 7 foot bed , tweaked 6.0 LSX 2004R Medium Olive
58 Apache fleet , 235 , offy intake , dual exhaust , 4 on the floor , red/white
69 Long Fleet , Custom , 6.0, 4l60 , AC , Medium Olive
67 chevelle is offline   Reply With Quote
Old 02-22-2018, 05:45 PM   #29
MARKDTN
Registered User
 
Join Date: Jan 2011
Location: Chattanooga, TN
Posts: 2,121
Re: Do factory truck small blocks usually come with steel cranks?

Quote:
Originally Posted by special-K View Post
The thing with all that is it is 100% car guy oriented. Not a single word on trucks, other than their motors can't be verified due to no partial VIN stamped in the block. Well, that's a Camaro guy talking, and he would need that number to have any idea of what he is talking about. A truck guy who knows these things inside and out up, down, and all around is your book. No mention of the 327s used in 40-60 series trucks or pickups.
I don't completely disagree with your comment. But I did discuss blocks which are car/truck/industrial. I cannot speak to C40 and larger (but I think 68 was the last year for a 327 there as well). The simple facts as far as I can see:
1) 67 and back 327s are all small journal and thus cannot be 4-bolt main.
2) 68 and up 327s are all large journal-however there are no 4-bolt blocks in 68. The 4-bolt block was introduced in 69. Mortec and others do not list a 4-bolt block in 68.
3) 68 is the last year for a 327 in a C10-30 so there are no 4-bolt mains in them since the block didn't exist yet.
4) as far as I can tell the only 327s in 69 went into Camaros and B-bodies, not into any trucks. C10-30 Trucks got 350s in 69.
5) Of course a 327 4-bolt can be made, but the factory never did.
__________________
'83 K20-TPI
'73 C10
'79 C10-ex-diesel(SOLD)
'07 Tahoe(Son driving)
'14 Suburban-DD
'71 C10-current project
MARKDTN is offline   Reply With Quote
Old 02-22-2018, 07:04 PM   #30
67 chevelle
Registered User
 
67 chevelle's Avatar
 
Join Date: May 2013
Location: WEST PALM FLORIDA
Posts: 1,174
Re: Do factory truck small blocks usually come with steel cranks?

Opps , there was one I had ,, only one , it was a 70 lt1 motor that was in a 68 camaro I bought , ran like crap when I got it , heads were shot , exhaust seats sunk , I put 200 cc dart sportsman heads , and a 280 h cam in it , ran 12 flat with very little traction .
__________________
68 Long Fleet , ly6 , turbo 350 , 3-5 drop , original paint , front discs
67 Small window , 7 foot bed , tweaked 6.0 LSX 2004R Medium Olive
58 Apache fleet , 235 , offy intake , dual exhaust , 4 on the floor , red/white
69 Long Fleet , Custom , 6.0, 4l60 , AC , Medium Olive
67 chevelle is offline   Reply With Quote
Old 02-22-2018, 08:12 PM   #31
harpo231
Registered User
 
harpo231's Avatar
 
Join Date: Nov 2014
Location: Lincoln City DE
Posts: 1,292
Re: Do factory truck small blocks usually come with steel cranks?

Quote:
Originally Posted by ericfallon View Post
Problem now is you can buy a china doll steel casted crank..
Have never used one but they are said to not be cast iron.
cast steel = less than 0.5 % carbon

cast iron = more than 2% carbon
__________________
Stan
67 swb BLU MULE
posted via flip-fone
harpo231 is offline   Reply With Quote
Old 02-23-2018, 11:28 AM   #32
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,749
Re: Do factory truck small blocks usually come with steel cranks?

Quote:
Originally Posted by MARKDTN View Post
I don't completely disagree with your comment. But I did discuss blocks which are car/truck/industrial. I cannot speak to C40 and larger (but I think 68 was the last year for a 327 there as well). The simple facts as far as I can see...
Yeah, I'm not arguing anything. I can't argue on the 4-bolt thing because I truly can't recall at this point. It was an absolutely original '68 C/20 327 when I rebuilt it. It was certainly a forged crank in there. I was saying those articles never mentioned larger trucks is all. They did mention industrial, but the two aren't the same. So, are the block casting numbers for 302-327-350 that list as 2-bolt & 4-bolt mean 2-bolt at first, then came the 4-bolt in the same casting? I'm talking about 3932386 (68-74) and 3956618 (68-79).
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is offline   Reply With Quote
Old 02-23-2018, 01:30 PM   #33
jeffahart
Senior Member
 
jeffahart's Avatar
 
Join Date: May 2012
Location: Scottsdale, AZ
Posts: 1,880
Re: Do factory truck small blocks usually come with steel cranks?

Just update the history to show: 1970 K20 350 with a two bolt main. It threw a rod through the side of the block at under 80k. So what, plentiful and cheap to replace, even when I did this particular truck way back in the 80s.

My expectation on any engine in these old vehicles is... the lowest common denominator. Anything else is a plus.

OP should not pull his pack and upgrade anything if it's running fine. I can't figure for the life of me why you care what crank it has, especially if a crate is being considered. Unless what crank you have is a deciding factor to keep your engine and work it.

I think he should look at the crank and let us know.

This thread has been an interesting read; a lot of fun engine trivia stuff.

For the OP. I tend to work with what I got. If I want something specific in an engine, I go buy it. Rule of thumb... assume nothing!

You've read the prose here. What crank do you have? Exactly!
__________________
White K20
jeffahart is offline   Reply With Quote
Old 02-23-2018, 02:42 PM   #34
MARKDTN
Registered User
 
Join Date: Jan 2011
Location: Chattanooga, TN
Posts: 2,121
Re: Do factory truck small blocks usually come with steel cranks?

Quote:
Originally Posted by special-K View Post
Yeah, I'm not arguing anything. I can't argue on the 4-bolt thing because I truly can't recall at this point. It was an absolutely original '68 C/20 327 when I rebuilt it. It was certainly a forged crank in there. I was saying those articles never mentioned larger trucks is all. They did mention industrial, but the two aren't the same. So, are the block casting numbers for 302-327-350 that list as 2-bolt & 4-bolt mean 2-bolt at first, then came the 4-bolt in the same casting? I'm talking about 3932386 (68-74) and 3956618 (68-79).
Yes, there are no 4-bolts in 1968. Look at Mortec
http://www.mortec.com/castnum.htm

and you will see for the 2 you mentioned 1968 is listed as 2-bolt and later applications are 2 or 4. There is enough meat to machine those (and 3970010) for either 2 or 4 bolt mains.

As far as cranks, they are all over the place. Seems like early small journal 327s got a lot of forged cranks. Large journal cars and C10 seems to be mostly cast in my experience. The bigger trucks are where the forged 327 cranks came from. This is much less documented than the 2 or 4 bolt mains.
__________________
'83 K20-TPI
'73 C10
'79 C10-ex-diesel(SOLD)
'07 Tahoe(Son driving)
'14 Suburban-DD
'71 C10-current project
MARKDTN is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:35 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com