3/4 ton Hub ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69C20CUSTOM · 02-15-2011, 09:44 PM

I want to swap hubs.
I want the big 6 bolt flange hubs.
I just like the look.
How can I do it.

NOW

WHAT I WANT

skoffice · 02-15-2011, 10:41 PM

I'm no expert, but you probably would have to change the spindle at the least. Maybe the knuckle too if the bolt pattern is different. The stub shafts shouldn't be any different. Is that 6 bolt setup a ford or something? I like what you have now, just cuz it's not all rusty

thinair · 02-15-2011, 11:30 PM

change the spindles outward.

70 beast · 02-16-2011, 12:04 AM

Quote:

Originally Posted by thinair

change the spindles outward.

Agreed. When I did mine, I swapped everything from the spindle out...spindle,backing plate, hub/rotor and lock outs.
Posted via Mobile Device

BLAZERMAN · 02-16-2011, 12:25 AM

You should be able to get by with just the wheel hubs from a 71 to 76 K-20 and depending on what you have now you may need the spindles from the same. Rotors and backing plates you have now will work...then get a set of Warn 9072 locking hubs and that should do it.

69C20CUSTOM · 02-16-2011, 11:49 AM

Ok thanks im on the look out for 70's hubs

68chevyfuelie · 02-16-2011, 12:59 PM

I've got a couple sets of the hubs for sale, check the classifieds there was another board member selling a set if I remember right. 70BlazerXXXXX?? It was something like that....

Redcap · 02-16-2011, 07:26 PM

If I'm not mistaken, the hubs you like the look of so much are conversion hubs for a truck equipped with a NP203.

68chevyfuelie · 02-16-2011, 07:43 PM

http://67-72chevytrucks.com/vboard/s...d.php?t=427704

No idea how you make the link clickable.

It was 72 Longhorn I was thinking of....

BLAZERMAN · 02-16-2011, 09:53 PM

Quote:

Originally Posted by Redcap

If I'm not mistaken, the hubs you like the look of so much are conversion hubs for a truck equipped with a NP203.

I'm pretty sure they are Warn 9072s, these were a replacement for the big Spicer external drive hubs used from the early 60s to mid 70s on Ford, IH, Dodge, Chevy and Jeeps

DirtyLarry · 02-17-2011, 12:35 AM

I agree, looks wise the big hub 44’s are interesting to look at and “look” mean. Functionality wise, they are no better or worse than the rotor/hub assembly in picture 1.

I also agree with Blazerman…..

Quote:

Originally Posted by BLAZERMAN

I'm pretty sure they are Warn 9072s, these were a replacement for the big Spicer external drive hubs used from the early 60s to mid 70s on Ford, IH, Dodge, Chevy and Jeeps

69C20CUSTOM · 02-17-2011, 12:48 AM

Thanks for the link

02-15-2011, 09:44 PM	#1
69C20CUSTOM Registered User Join Date: Apr 2007 Location: Kansas City Posts: 176	3/4 ton Hub ? I want to swap hubs. I want the big 6 bolt flange hubs. I just like the look. How can I do it. NOW WHAT I WANT __________________ 2003 Nissan Frontier Crewcab 4x4-Daily 1982 Chevy Suburban 3/4ton 4x4, Mud Toy Lookin for a C10

02-15-2011, 10:41 PM	#2
skoffice Registered User Join Date: Apr 2007 Location: Elk Grove, CA Posts: 375	Re: 3/4 ton Hub ? I'm no expert, but you probably would have to change the spindle at the least. Maybe the knuckle too if the bolt pattern is different. The stub shafts shouldn't be any different. Is that 6 bolt setup a ford or something? I like what you have now, just cuz it's not all rusty __________________ 1964 C10 Shortened Shortbed Cammed LQ9 P&P 1967 C10 Trophy Truck BB 438 (soon to be worked on again) Last edited by skoffice; 02-15-2011 at 10:42 PM.

02-15-2011, 11:30 PM	#3
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 996	Re: 3/4 ton Hub ? change the spindles outward.

02-16-2011, 12:25 AM	#5
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,826	Re: 3/4 ton Hub ? You should be able to get by with just the wheel hubs from a 71 to 76 K-20 and depending on what you have now you may need the spindles from the same. Rotors and backing plates you have now will work...then get a set of Warn 9072 locking hubs and that should do it. __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

02-16-2011, 11:49 AM	#6
69C20CUSTOM Registered User Join Date: Apr 2007 Location: Kansas City Posts: 176	Re: 3/4 ton Hub ? Ok thanks im on the look out for 70's hubs __________________ 2003 Nissan Frontier Crewcab 4x4-Daily 1982 Chevy Suburban 3/4ton 4x4, Mud Toy Lookin for a C10

02-16-2011, 12:59 PM	#7
68chevyfuelie Registered User Join Date: Mar 2008 Location: Kitchener, Ontario Posts: 487	Re: 3/4 ton Hub ? I've got a couple sets of the hubs for sale, check the classifieds there was another board member selling a set if I remember right. 70BlazerXXXXX?? It was something like that....

02-16-2011, 07:26 PM	#8
Redcap Registered User Join Date: May 2010 Location: Lewis County, WA Posts: 1,523	Re: 3/4 ton Hub ? If I'm not mistaken, the hubs you like the look of so much are conversion hubs for a truck equipped with a NP203.

02-16-2011, 07:43 PM	#9
68chevyfuelie Registered User Join Date: Mar 2008 Location: Kitchener, Ontario Posts: 487	Re: 3/4 ton Hub ? http://67-72chevytrucks.com/vboard/s...d.php?t=427704 No idea how you make the link clickable. It was 72 Longhorn I was thinking of....

02-17-2011, 12:48 AM	#12
69C20CUSTOM Registered User Join Date: Apr 2007 Location: Kansas City Posts: 176	Re: 3/4 ton Hub ? Thanks for the link __________________ 2003 Nissan Frontier Crewcab 4x4-Daily 1982 Chevy Suburban 3/4ton 4x4, Mud Toy Lookin for a C10



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.