How to: Ruin a perfectly good C10 - Page 51 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gringoloco · 10-23-2016, 08:37 PM

Time for her quadrennially scheduled waxing

Muuuch better

Also been talking to Dave and Nate Porter again, and they've convinced (well, shamed really) me into going a little more 'extreme' with this round of mods...

**lolife99** · 10-23-2016, 08:51 PM

Extreme is good,..

C10_ustacould · 10-24-2016, 02:59 AM

Quote:

Originally Posted by gringoloco

Also been talking to Dave and Nate Porter again, and they've convinced (well, shamed really) me into going a little more 'extreme' with this round of mods...

Come on man!!

Bennett68C10 · 10-24-2016, 08:14 AM

Good Choice! Are you still planning on doing coilovers or bags now?

gringoloco · 10-24-2016, 10:29 AM

Quote:

Originally Posted by lolife99

Extreme is good,..

It is, but also requires an extreme amount of work...

Quote:

Originally Posted by C10_ustacould

Come on man!!

I know, I know... At least I can't change my mind again--there's no other options left

Quote:

Originally Posted by Bennett68C10

Good Choice! Are you still planning on doing coilovers or bags now?

Lets just say I've been looking hard at the new endo products, trying to decide if they're worth the money

**Hart_Rod** · 10-24-2016, 10:31 AM

Quote:

Originally Posted by gringoloco

Time for her quadrennially scheduled waxing

Muuuch better

Also been talking to Dave and Nate Porter again, and they've convinced (well, shamed really) me into going a little more 'extreme' with this round of mods...

gringoloco · 10-24-2016, 11:01 AM

Quote:

Originally Posted by Hart_Rod

Yes, hence our DM convo on IG. Need some room for tires

Stickman · 10-25-2016, 01:20 PM

Quote:

Originally Posted by gringoloco

Yes, hence our DM convo on IG. Need some room for tires

So is that code for Bags or .........

DeepOceanStepside · 10-26-2016, 08:21 PM

Awesome build! Spent a few hours reading thru all the pages! Your truck inspired me to do a paint job on my 70 stepper like yours! Beautiful truck!

gringoloco · 10-28-2016, 12:46 PM

Quote:

Originally Posted by Stickman

So is that code for Bags or .........

So, it looks like we're gonna end up with an 'extreme'ly low static coilover drop. I'll keep the thread up-to-date with any further changes (hopefully no mas)

Quote:

Originally Posted by DeepOceanStepside

Awesome build! Spent a few hours reading thru all the pages! Your truck inspired me to do a paint job on my 70 stepper like yours! Beautiful truck!

Thanks and good luck! Only one way to know if you can do it, and that's to try. They have a much better selection of colors available now than they did a few years ago. Great quality paint, that I think I'll be using more of soon...

gringoloco · 10-28-2016, 12:58 PM

Wife just sent me this pic:

...and so it begins (continues?)...

Bennett68C10 · 10-28-2016, 01:08 PM

Quote:

Originally Posted by gringoloco

Wife just sent me this pic:

...and so it begins (continues?)...

I think I know what's in that box

gringoloco · 10-28-2016, 04:13 PM

Quote:

Originally Posted by Bennett68C10

I think I know what's in that box

I can't wait to take a measuring device to these things (and compare them to my Belltechs)! I've read and heard multiple different guesses and proposals on how much he track is narrowed. I want to quantitatively dispel all rumors

kehstr · 10-29-2016, 01:00 AM

wait... so what was in that box?

Stickman · 10-29-2016, 10:25 AM

Quote:

Originally Posted by gringoloco

So, it looks like we're gonna end up with an 'extreme'ly low static coilover drop. I'll keep the thread up-to-date with any further changes (hopefully no mas)

Thanks and good luck! Only one way to know if you can do it, and that's to try. They have a much better selection of colors available now than they did a few years ago. Great quality paint, that I think I'll be using more of soon...

Glad to hear your going with the extreme coilovers and we can observe your expertise , no change in the rear with the No Limit trailing arm set up correct.

gringoloco · 10-29-2016, 12:20 PM

Quote:

Originally Posted by kehstr

wait... so what was in that box?

A set of CPP modular drop spindles. Hoping they will provide a narrower track-width (I'm eager to compare them to my Belltech drop spindles), which will provide clearance for turning at super-low heights (and maybe a deeper-dish wheel

). I also went with the 1" narrowed arms from PB

Quote:

Originally Posted by Stickman

Glad to hear your going with the extreme coilovers and we can observe your expertise , no change in the rear with the No Limit trailing arm set up correct.

The NL rear kit has been sold to another member. The 'current' plan involves a PB level 3 (extreme) v7 coilover Dropmember up front and level 2 (touring) coilover Dropmember out back. Sorry for all of the confusion--I just barely have figured out what's going on myself

The boxes should start piling up, soon: PB suspension/hood hinges, Ridetech coilovers (via shores6), HartRod ChubTubz, Hill's Rod and Custom inner fenders, and a bunch of other stuff from places I haven't ordered yet--still need Boyd's fuel tank, steering rack/hoses/linkage and a bunch of other hard/soft parts--aaaaah! this is the snowball I was trying to avoid

smbrouss70 · 10-30-2016, 10:05 AM

Quote:

Originally Posted by gringoloco

aaaaah! this is the snowball I was trying to avoid

Yeah, but admit it... playing in the snow is so damn fun, huh?

Stickman · 10-30-2016, 08:24 PM

So what was the reason to go with the PB rear vs NL. I like both products/companies so I was just curious and one happens to be in my backyard.

kehstr · 10-30-2016, 11:29 PM

Quote:

Originally Posted by gringoloco

still need Boyd's fuel tank

you mean like this...
Name: DSCF0163.jpg
Views: 1904
Size: 44.1 KB

gringoloco · 10-31-2016, 01:08 PM

Quote:

Originally Posted by smbrouss70

Yeah, but admit it... playing in the snow is so damn fun, huh?

Yes it is, but I'm burnin' $100 bills to stay warm

Quote:

Originally Posted by Stickman

So what was the reason to go with the PB rear vs NL. I like both products/companies so I was just curious and one happens to be in my backyard.

Ultimately, I just wanted to go lower. The NL pieces were very nice, but didn't allow me to drop as far as I wanted

Quote:

Originally Posted by kehstr

you mean like this...
Attachment 1585765

Yes, very similar. I think I'll need a bed fill. Selling that one?

kehstr · 10-31-2016, 03:23 PM

Quote:

Originally Posted by gringoloco

Yes, very similar. I think I'll need a bed fill. Selling that one?

No, it is one that I ordered that showed up on Friday. Just thought it was funny that you were talking about getting one when mine just showed up. I don't know if you have ever looked at one before, but they are very well built and have all of the needed baffles, and then some!

gringoloco · 10-31-2016, 06:58 PM

Good to hear! I've never seen one in person, but I've never seen a bad review on one. Im a little side-tracked with putting together an AOD to t5 swap on the Muskrat, so I've taken a break on ordering truck parts (for the moment). I have some time to kill while I wait for the PB bits...

gringoloco · 11-27-2016, 05:10 PM

Still stockpiling parts:

mcbassin · 11-28-2016, 11:57 AM

Killer truckload of parts!

**Hart_Rod** · 11-28-2016, 01:35 PM

You should be busy for a while!

10-23-2016, 08:37 PM	#1251
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: How to: Ruin a perfectly good C10 Time for her quadrennially scheduled waxing Muuuch better Also been talking to Dave and Nate Porter again, and they've convinced (well, shamed really) me into going a little more 'extreme' with this round of mods... Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

10-23-2016, 08:51 PM	#1252
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,682	Re: How to: Ruin a perfectly good C10 Extreme is good,.. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

10-24-2016, 08:14 AM	#1254
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: How to: Ruin a perfectly good C10 Good Choice! Are you still planning on doing coilovers or bags now? __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

10-26-2016, 08:21 PM	#1259
DeepOceanStepside Registered User Join Date: Sep 2015 Location: Saginaw, MI Posts: 139	Re: How to: Ruin a perfectly good C10 Awesome build! Spent a few hours reading thru all the pages! Your truck inspired me to do a paint job on my 70 stepper like yours! Beautiful truck! __________________ 1970 Base Step Side Dark Olive 250 3ott restoration 1972 k5 4x4 250 3ott project 1970 long bed light olive 283 th350 driver SOLD

10-28-2016, 12:58 PM	#1261
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: How to: Ruin a perfectly good C10 Wife just sent me this pic: ...and so it begins (continues?)... Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

10-29-2016, 01:00 AM	#1264
kehstr Registered User Join Date: Mar 2015 Location: Utah Posts: 748	Re: How to: Ruin a perfectly good C10 wait... so what was in that box? __________________ 72 GMC highlander nicknamed by my then 6-year-old brother "stripes" http://67-72chevytrucks.com/vboard/s....php?p=7378180 Check out my Youtube channel @Chad's Fab

10-30-2016, 08:24 PM	#1268
Stickman Registered User Join Date: Mar 2008 Location: Chandler,AZ Posts: 571	Re: How to: Ruin a perfectly good C10 So what was the reason to go with the PB rear vs NL. I like both products/companies so I was just curious and one happens to be in my backyard.

10-31-2016, 06:58 PM	#1272
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: How to: Ruin a perfectly good C10 Good to hear! I've never seen one in person, but I've never seen a bad review on one. Im a little side-tracked with putting together an AOD to t5 swap on the Muskrat, so I've taken a break on ordering truck parts (for the moment). I have some time to kill while I wait for the PB bits... __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

11-27-2016, 05:10 PM	#1273
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: How to: Ruin a perfectly good C10 Still stockpiling parts: Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

11-28-2016, 11:57 AM	#1274
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: How to: Ruin a perfectly good C10 Killer truckload of parts! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

11-28-2016, 01:35 PM	#1275
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,827	Re: How to: Ruin a perfectly good C10 You should be busy for a while! __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.