New Lmc tail light housing connection problem - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tommyups · 12-03-2018, 06:42 PM

Lmc parts... Trying to connect new rear wiring harness to new tail light housing.
One side seems to connect ok, the other no luck, when I insert bulb the connector pops off housing!

terry b · 12-03-2018, 07:09 PM

Is the spring compressing corectly?

Tommyups · 12-03-2018, 08:56 PM

The spring seems to be compressing fine. There’s just not a lot of surface for plastic prongs to grab onto

firedemon · 12-03-2018, 10:25 PM

shrink tubeing

**AussieinNC** · 12-03-2018, 10:36 PM

Send it back for another one...

**samkost** · 12-03-2018, 11:03 PM

Poorly made aftermarket light housings are the problem.
They have more of a rounded rim where the plastic harness clips onto.
You may be able to file your part down some to allow more of a bite?

Not the best stock photo, but you can see the difference on some OE tail light housings.
Good luck

fdbdw · 12-08-2018, 01:39 PM

I had the same problem with LMC taillight housings. Left one fit no problem, right kept popping out the wire harness when plugged in the bulb. I finally got it to hold, I’m sure it will pop off again and I plan on using firedemon’s idea and shrink tube it.

Andy4639 · 12-08-2018, 01:53 PM

Try a tie wrap around it to keep it in place.

Tommyups · 12-08-2018, 02:34 PM

Thanks for all the advice, I ordered some of the shrink tubing going to give that a try.
This is my first c 10 I’m just wondering if all the aftermarket parts need tweaking

terry b · 12-08-2018, 03:09 PM

Some do. There are better places to buy parts than LMC. But you are better off getting new old stock or good used parts. To me hunting down good used parts is the most rewarding part of the process. Avoid aftermarket when you can. Good luck with your truck!!

12-03-2018, 06:42 PM	#1
Tommyups Registered User Join Date: Sep 2018 Location: Dayton Oh Posts: 125	New Lmc tail light housing connection problem Lmc parts... Trying to connect new rear wiring harness to new tail light housing. One side seems to connect ok, the other no luck, when I insert bulb the connector pops off housing! Attached Images

12-03-2018, 07:09 PM	#2
terry b Registered User Join Date: Oct 2011 Location: jackson michigan Posts: 755	Re: New Lmc tail light housing connection problem Is the spring compressing corectly?

12-03-2018, 08:56 PM	#3
Tommyups Registered User Join Date: Sep 2018 Location: Dayton Oh Posts: 125	Re: New Lmc tail light housing connection problem The spring seems to be compressing fine. There’s just not a lot of surface for plastic prongs to grab onto

12-03-2018, 10:25 PM	#4
firedemon Registered User Join Date: Jun 2015 Location: @ Posts: 890	Re: New Lmc tail light housing connection problem shrink tubeing

12-03-2018, 10:36 PM	#5
AussieinNC Moderator Join Date: Jun 2017 Location: Cherryville, NC Posts: 2,155	Re: New Lmc tail light housing connection problem Send it back for another one... __________________ Family and country before all others... 2006 Chevy Silverado (Daily Driver) 2012 Chevy Equinox

12-03-2018, 11:03 PM	#6
samkost Senior Member Join Date: Sep 2014 Location: Lake Tapps, Wa. Posts: 607	Re: New Lmc tail light housing connection problem Poorly made aftermarket light housings are the problem. They have more of a rounded rim where the plastic harness clips onto. You may be able to file your part down some to allow more of a bite? Not the best stock photo, but you can see the difference on some OE tail light housings. Good luck Attached Images Last edited by samkost; 12-03-2018 at 11:09 PM.

12-08-2018, 01:39 PM	#7
fdbdw Registered User Join Date: Jan 2009 Location: colorado springs Posts: 479	Re: New Lmc tail light housing connection problem I had the same problem with LMC taillight housings. Left one fit no problem, right kept popping out the wire harness when plugged in the bulb. I finally got it to hold, I’m sure it will pop off again and I plan on using firedemon’s idea and shrink tube it.

12-08-2018, 01:53 PM	#8
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: New Lmc tail light housing connection problem Try a tie wrap around it to keep it in place. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

12-08-2018, 02:34 PM	#9
Tommyups Registered User Join Date: Sep 2018 Location: Dayton Oh Posts: 125	Re: New Lmc tail light housing connection problem Thanks for all the advice, I ordered some of the shrink tubing going to give that a try. This is my first c 10 I’m just wondering if all the aftermarket parts need tweaking

12-08-2018, 03:09 PM	#10
terry b Registered User Join Date: Oct 2011 Location: jackson michigan Posts: 755	Re: New Lmc tail light housing connection problem Some do. There are better places to buy parts than LMC. But you are better off getting new old stock or good used parts. To me hunting down good used parts is the most rewarding part of the process. Avoid aftermarket when you can. Good luck with your truck!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.