1967 GMC Front Park Lamp Harness? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jmader** · 03-20-2018, 08:26 AM

Does anyone repro this? If not the whole harness then just the ends so I can make a new one?

**RodnRudy** · 03-20-2018, 08:42 AM

Contact American Autowire they may have what your looking for.

sleepingbag · 03-20-2018, 09:36 AM

Some possibilities, but really just take it to NAPA, they have all those connectors probably in stock and wire it yourself

**special-K** · 03-20-2018, 11:47 AM

I don't know of them being reproduced, but NAPA won't have anything for that specific application. As far as connectors go, all it takes are two female connectors. Plugging the hole in the housing is what makes it specific. You could probably make a plug work with a hole for the two wires. But to be original, either find them used or just use the ends from a good set

**jmader** · 03-22-2018, 07:52 AM

AAW doesn't make them they said they're supposed to come with the housing (which they don't reproduce.)

Luckily I saved my old ones which I will probably just have to use but I was hoping to find new ends at least since everything else in the truck will be brand new. Is there any way to refurbish the rubber ends to at least make them appear new? Maybe soak them in something to soften the rubber a little bit?

chewychevy67 · 03-22-2018, 10:41 AM

The 67 rubber ends are different than 68 to 72 as well making them super hard to find if you really need them. I soaked mine in orange hand cleaner along with the wires and it came out surprisingly nice. 67 left and 68 up on the right.

**jmader** · 03-23-2018, 07:59 AM

Quote:

Originally Posted by chewychevy67

The 67 rubber ends are different than 68 to 72 as well making them super hard to find if you really need them. I soaked mine in orange hand cleaner along with the wires and it came out surprisingly nice. 67 left and 68 up on the right.

Those look nice I think I'll try soaking them before I do anything else.

**special-K** · 03-23-2018, 08:15 AM

A strong solution of Purple Power is how I make rubber black again as well. Let it soak a couple few days.

**HO455** · 03-23-2018, 03:53 PM

Quote:

Originally Posted by jmader

Does anyone repro this? If not the whole harness then just the ends so I can make a new one?

Dude! I wish mine looked as nice as yours do. Harness Envy!

**painterljp** · 05-01-2018, 08:48 AM

Just got evidently some 67 ones from a local parts guy here. Ours is a 68 and yes they don't fit. Gonna check with him this morning and see if he has some 68 ones. But will sell you 67 ones if he has the right ones for me. They are in good shape. Will let you know later today.

03-20-2018, 08:26 AM	#1
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,485	1967 GMC Front Park Lamp Harness? Does anyone repro this? If not the whole harness then just the ends so I can make a new one? __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

03-20-2018, 08:42 AM	#2
RodnRudy Senior Member Join Date: Oct 2014 Location: New Palestine In Posts: 930	Re: 1967 GMC Front Park Lamp Harness? Contact American Autowire they may have what your looking for. __________________ Phil "Money is only a tool to create and achieve what you want most in life" PayPal: rodnrudy@comcast.net

03-20-2018, 09:36 AM	#3
sleepingbag Registered User Join Date: Nov 2006 Location: Pomona Park, FL Posts: 151	Re: 1967 GMC Front Park Lamp Harness? Some possibilities, but really just take it to NAPA, they have all those connectors probably in stock and wire it yourself Attached Images __________________ 1967 GMC 3/4 ton Fleetside 350 ci Chevy I'd rather do it myself and spend the extra 500 dollars

03-20-2018, 11:47 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 1967 GMC Front Park Lamp Harness? I don't know of them being reproduced, but NAPA won't have anything for that specific application. As far as connectors go, all it takes are two female connectors. Plugging the hole in the housing is what makes it specific. You could probably make a plug work with a hole for the two wires. But to be original, either find them used or just use the ends from a good set __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-22-2018, 07:52 AM	#5
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,485	Re: 1967 GMC Front Park Lamp Harness? AAW doesn't make them they said they're supposed to come with the housing (which they don't reproduce.) Luckily I saved my old ones which I will probably just have to use but I was hoping to find new ends at least since everything else in the truck will be brand new. Is there any way to refurbish the rubber ends to at least make them appear new? Maybe soak them in something to soften the rubber a little bit? __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

03-22-2018, 10:41 AM	#6
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,411	Re: 1967 GMC Front Park Lamp Harness? The 67 rubber ends are different than 68 to 72 as well making them super hard to find if you really need them. I soaked mine in orange hand cleaner along with the wires and it came out surprisingly nice. 67 left and 68 up on the right. Attached Images

03-23-2018, 08:15 AM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 1967 GMC Front Park Lamp Harness? A strong solution of Purple Power is how I make rubber black again as well. Let it soak a couple few days. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-01-2018, 08:48 AM	#10
painterljp Senior Member Join Date: Nov 2014 Location: Albuquerque NM Posts: 903	Re: 1967 GMC Front Park Lamp Harness? Just got evidently some 67 ones from a local parts guy here. Ours is a 68 and yes they don't fit. Gonna check with him this morning and see if he has some 68 ones. But will sell you 67 ones if he has the right ones for me. They are in good shape. Will let you know later today.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.