The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1967-1972 Chevrolet & GMC Pickups Parts Board > Blazer and Suburban Stuff

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-05-2017, 12:56 PM   #1
Coatingguy
Account Suspended
 
Join Date: Nov 2016
Location: Billings, Montana
Posts: 289
1971 K5 Blazer parts truck

I have decided to sell this project truck. It a 1971, has a clear Title, ready to go.
It was originally a v8 4 speed manual 4x4 truck. Engine trans and case are gone. The cross members are all still inside the truck, and the rear driveshaft. The body is mostly very nice. The worst is the passenger rear quarter panel behind the rear wheel. Its dented in pretty good down low. The drivers quarter doesn't have a ding in it, with just a small spot of rust by the rocker panel. There's a little rust in the front floors, nothing major by any means.
The doors, front fenders, hood, one inner fender, windshield frame, firewall, are all 99% rust free and very nice. I say 99% because there could always be something hidden somewhere I can't see from the out side. All glass is still in place, the top is a double wall, and is not saggy. The hatch is way above average condition. All hardware is present and in place. The tailgate is missing, as is the fuel tank. Someone swapped out the disc brake front axle for a drum brake unit. The high-back bucket seats that are pictured are included. I do have a set of utility front buckets and sliders, and a rear blazer bench complete. They are not included with the truck. I need a set of front sport buckets for a 1972 blazer. Unrestored or completely redone, if I could get a set of those bought I would consider selling the utility seats with this truck. I'm open to trades in that department. This would be a fantastic builder, or parts truck. I want to sell this complete at this time. $2,500
Attached Images
     
Coatingguy is offline   Reply With Quote
Old 05-05-2017, 12:57 PM   #2
Coatingguy
Account Suspended
 
Join Date: Nov 2016
Location: Billings, Montana
Posts: 289
Re: 1971 K5 Blazer parts truck

Pics 2
Attached Images
     
Coatingguy is offline   Reply With Quote
Old 05-05-2017, 12:58 PM   #3
Coatingguy
Account Suspended
 
Join Date: Nov 2016
Location: Billings, Montana
Posts: 289
Re: 1971 K5 Blazer parts truck

pics 3, the truck was originally orange, it's been off the road since 1989
Attached Images
     
Coatingguy is offline   Reply With Quote
Old 05-05-2017, 12:59 PM   #4
Coatingguy
Account Suspended
 
Join Date: Nov 2016
Location: Billings, Montana
Posts: 289
Re: 1971 K5 Blazer parts truck

Pics 4
Attached Images
     
Coatingguy is offline   Reply With Quote
Old 05-05-2017, 01:00 PM   #5
Coatingguy
Account Suspended
 
Join Date: Nov 2016
Location: Billings, Montana
Posts: 289
Re: 1971 K5 Blazer parts truck

Pics 5

I can take any more pictures of anything anyone wants to see.
Coatingguy is offline   Reply With Quote
Old 05-05-2017, 01:01 PM   #6
Coatingguy
Account Suspended
 
Join Date: Nov 2016
Location: Billings, Montana
Posts: 289
Re: 1971 K5 Blazer parts truck

Pics 6
Attached Images
   
Coatingguy is offline   Reply With Quote
Old 05-05-2017, 05:25 PM   #7
Cheyennekid
Registered User
 
Join Date: Dec 2011
Location: Sg california
Posts: 89
Re: 1971 K5 Blazer parts truck

If only u were closer i would have bought it!
Cheyennekid is offline   Reply With Quote
Old 05-05-2017, 05:43 PM   #8
preciador6
Registered User
 
Join Date: Dec 2013
Location: So Cal
Posts: 680
Re: 1971 K5 Blazer parts truck

Quote:
Originally Posted by Cheyennekid View Post
If only u were closer i would have bought it!
get it shipped only 18 hours away.
preciador6 is offline   Reply With Quote
Old 05-05-2017, 08:30 PM   #9
Coatingguy
Account Suspended
 
Join Date: Nov 2016
Location: Billings, Montana
Posts: 289
Re: 1971 K5 Blazer parts truck

California's not too far. I guess it just depends on how bad you want it.
Coatingguy is offline   Reply With Quote
Old 05-05-2017, 08:37 PM   #10
Ebully72
Registered User
 
Join Date: Jan 2016
Location: Saylorsburg PA
Posts: 77
Re: 1971 K5 Blazer parts truck

I thought the same thing it looks like a real good place to start, I would never see anything in that shape in Northeast. Good luck with the sale I'm sure it t won't last long.
Ebully72 is offline   Reply With Quote
Old 05-05-2017, 08:42 PM   #11
Coatingguy
Account Suspended
 
Join Date: Nov 2016
Location: Billings, Montana
Posts: 289
Re: 1971 K5 Blazer parts truck

California's not too far. I guess it just depends on how bad you want it.
Coatingguy is offline   Reply With Quote
Old 05-05-2017, 09:23 PM   #12
1968k20
Senior Member
 
1968k20's Avatar
 
Join Date: Dec 2009
Location: Chester,California
Posts: 5,618
Re: 1971 K5 Blazer parts truck

Bought a '67 suburban from Coatingguy!
__________________
1977 Chevrolet K10 SWB Project 350/4spd/np205
1977 Chevrolet K20 LWB 350/350/203
1991 4Runner 22RE 5 SPD
Yanmar Tractor 3 Cyl Diesel
1968k20 is offline   Reply With Quote
Old 05-05-2017, 09:35 PM   #13
Coatingguy
Account Suspended
 
Join Date: Nov 2016
Location: Billings, Montana
Posts: 289
Re: 1971 K5 Blazer parts truck

How's the ole Suburban? The back yard isn't nearly as colorful without it haha
Coatingguy is offline   Reply With Quote
Old 05-05-2017, 09:47 PM   #14
harrisoncole4
Registered User
 
harrisoncole4's Avatar
 
Join Date: Sep 2015
Location: St.Thomas, ON
Posts: 320
Re: 1971 K5 Blazer parts truck

Good looking truck for the price!
__________________
1969 K5 Blazer - 507 Light Blue - http://67-72chevytrucks.com/vboard/s...d.php?t=802858
harrisoncole4 is offline   Reply With Quote
Old 05-05-2017, 11:39 PM   #15
1968k20
Senior Member
 
1968k20's Avatar
 
Join Date: Dec 2009
Location: Chester,California
Posts: 5,618
Re: 1971 K5 Blazer parts truck

Quote:
Originally Posted by Coatingguy View Post
How's the ole Suburban? The back yard isn't nearly as colorful without it haha
It's great! Runs like a champ with a different carb on it. The acc pump was shot in the old one and the balls wer stuck!
__________________
1977 Chevrolet K10 SWB Project 350/4spd/np205
1977 Chevrolet K20 LWB 350/350/203
1991 4Runner 22RE 5 SPD
Yanmar Tractor 3 Cyl Diesel
1968k20 is offline   Reply With Quote
Old 05-06-2017, 10:20 AM   #16
painterljp
Senior Member
 
Join Date: Nov 2014
Location: Albuquerque NM
Posts: 903
Re: 1971 K5 Blazer parts truck

There is guy in NM craigslist ad. In Santa Fe who is looking for one don't know how to post a link but look up craigslist in Santa fe and he has a WTB ad in there for I think 72 blazer. I already emailed him a couple of pics and wants to know how to get ahold of you. Shoot him an email.
painterljp is offline   Reply With Quote
Old 05-06-2017, 11:45 AM   #17
Coatingguy
Account Suspended
 
Join Date: Nov 2016
Location: Billings, Montana
Posts: 289
Re: 1971 K5 Blazer parts truck

Oh ok thanks, sounds good. My phone is 406-208-9405. Your welcome to email him my number.
Coatingguy is offline   Reply With Quote
Old 05-06-2017, 12:14 PM   #18
too much stuff
Roadtrip!
 
too much stuff's Avatar
 
Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,692
Re: 1971 K5 Blazer parts truck

How are the rocker boxes underneath? Does the windshield frame have any signs of rust? Does the frame match the title and does the frame appear straight? How soon would it need to be picked up?
Thanks, Eric
__________________
67 gmc custom lwb dakota truck. Sold...And bought back
69 swb 4x4 project (in progress)
70 c-10 lwb texas truck
70 4x4/BB/bkts/posi/tach(retired)
70 swb (wifes)
70 jimmy camper
71 K-5 factory 2wd
71 cheyenne 4x4/tach/posi/ plow rig
71 Cheyenne20 BB, buckets, tach, tilt, 4 speed
72 jimmy CST wyoming rig
72 jimmy Colorado rig
72 lifted texas 4x4 3/4 ton burb
65 fury conv. 383/auto
65 chrysler 300 "L" 413 auto
too much stuff is offline   Reply With Quote
Old 05-06-2017, 01:08 PM   #19
Coatingguy
Account Suspended
 
Join Date: Nov 2016
Location: Billings, Montana
Posts: 289
Re: 1971 K5 Blazer parts truck

The rocker boxes look completely solid, the rocker panels are in real nice shape but have been changed. They appear to be GM rockers. The frame looks great, there is no salt used up in this area, so rust isn't a huge issue around here. The frame and title and Vin plate all match.
I see no rust or corrosion issues around the windshield frame, Cowl area, or firewall.
It can stay here for a while, I've stored some for up to a year. I don't want to get into that again though.
Attached Images
     
Coatingguy is offline   Reply With Quote
Old 05-06-2017, 01:14 PM   #20
Coatingguy
Account Suspended
 
Join Date: Nov 2016
Location: Billings, Montana
Posts: 289
Re: 1971 K5 Blazer parts truck

Additional
Attached Images
     
Coatingguy is offline   Reply With Quote
Old 05-06-2017, 01:20 PM   #21
too much stuff
Roadtrip!
 
too much stuff's Avatar
 
Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,692
Re: 1971 K5 Blazer parts truck

Driver door looks blue, is it an original blazer door? or truck door? Can you post a pic of the rust on the floor you mentioned? also is a spid pic available? Is there a grill, front bumper etc that come with it? Is the hood and fenders all pretty straight? Core support?
Bummer I was just there a few weeks ago with an open trailer...
__________________
67 gmc custom lwb dakota truck. Sold...And bought back
69 swb 4x4 project (in progress)
70 c-10 lwb texas truck
70 4x4/BB/bkts/posi/tach(retired)
70 swb (wifes)
70 jimmy camper
71 K-5 factory 2wd
71 cheyenne 4x4/tach/posi/ plow rig
71 Cheyenne20 BB, buckets, tach, tilt, 4 speed
72 jimmy CST wyoming rig
72 jimmy Colorado rig
72 lifted texas 4x4 3/4 ton burb
65 fury conv. 383/auto
65 chrysler 300 "L" 413 auto
too much stuff is offline   Reply With Quote
Old 05-06-2017, 01:52 PM   #22
Coatingguy
Account Suspended
 
Join Date: Nov 2016
Location: Billings, Montana
Posts: 289
Re: 1971 K5 Blazer parts truck

The drivers door was blue yes, I'm not sure about weather it was a blazer door or not. I'll look when I get back home. There is no core support, the fenders are rust free and very clean. The spid is gone but glove box door is there, all heater parts and cowl is there. All nice.
Attached Images
     
Coatingguy is offline   Reply With Quote
Old 05-06-2017, 02:14 PM   #23
paul mora
Senior Member
 
Join Date: Jan 2009
Location: huntington beach california
Posts: 975
Re: 1971 K5 Blazer parts truck

Will do the 2500 if I could get my shipper to give me a reasonable cost to get it to California. If you give me the total measurement on the height I can get the estimate.
__________________
Pulatoy
paul mora is offline   Reply With Quote
Old 05-06-2017, 03:48 PM   #24
Coatingguy
Account Suspended
 
Join Date: Nov 2016
Location: Billings, Montana
Posts: 289
Re: 1971 K5 Blazer parts truck

Paul, I will do that, give me a few hours and I'll send them off.
Coatingguy is offline   Reply With Quote
Old 05-06-2017, 04:20 PM   #25
Coatingguy
Account Suspended
 
Join Date: Nov 2016
Location: Billings, Montana
Posts: 289
Re: 1971 K5 Blazer parts truck

Total height is 73" with tires completely full. Also it's 15' 1" long. The parking brake does work also.
Coatingguy is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:05 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com