1949 bed to frame mounting holes - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Flysocal · 10-11-2016, 10:50 AM

I'm going to get a mar-k bed in December but as of now I have no bed. I want to install no limit tank today with side fill and box in some areas for rear suspension mock up. I don't want to box frame in areas where the bed bolts to it. So I could use a little help now to save time later:

Can someone give me measurements so I can locate the needed holes? Thank you!

mr48chev · 10-11-2016, 11:48 AM

The holes are there, I'm on the road and maybe someone can post a photo with the holes marked.

Or they can save this, mark the holes and repost it below.

Flysocal · 10-11-2016, 11:09 PM

Can someone tell me if my notch for fuel filler removed a mounting hole for bed?

Hakang · 11-27-2016, 06:46 PM

Quote:

Originally Posted by Flysocal

Can someone tell me if my notch for fuel filler removed a mounting hole for bed?

Sorry to say, but yes.

mr48chev · 11-27-2016, 08:43 PM

Scroll down this page a bit. I think you are good as the cross sill goes across the frame where the hole to the right of the neck and notch are if the photo partway down the page in this link is right. http://talk.classicparts.com/threads...ed-wood.12180/

10-11-2016, 10:50 AM	#1
Flysocal Registered User Join Date: Jun 2015 Location: Glendale Posts: 414	1949 bed to frame mounting holes I'm going to get a mar-k bed in December but as of now I have no bed. I want to install no limit tank today with side fill and box in some areas for rear suspension mock up. I don't want to box frame in areas where the bed bolts to it. So I could use a little help now to save time later: Can someone give me measurements so I can locate the needed holes? Thank you!

10-11-2016, 11:48 AM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,284	Re: 1949 bed to frame mounting holes The holes are there, I'm on the road and maybe someone can post a photo with the holes marked. Or they can save this, mark the holes and repost it below. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

10-11-2016, 11:09 PM	#3
Flysocal Registered User Join Date: Jun 2015 Location: Glendale Posts: 414	Re: 1949 bed to frame mounting holes Can someone tell me if my notch for fuel filler removed a mounting hole for bed?

11-27-2016, 08:43 PM	#5
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,284	Re: 1949 bed to frame mounting holes Scroll down this page a bit. I think you are good as the cross sill goes across the frame where the hole to the right of the neck and notch are if the photo partway down the page in this link is right. http://talk.classicparts.com/threads...ed-wood.12180/ __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.