Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
06-11-2020, 11:04 AM | #1 |
The Peacemaker
Join Date: Feb 2005
Location: Kannapolis, NC
Posts: 783
|
Squarebody ididit column install - existing wiring help/identification
The column is installed and wired for normal function (from what I can tell), all my blinkers, lights, etc are working and the column has power, but when I was cleaning up my wiring I have two connectors left that used to go to the original column. Looking to get confirmation because the diagrams I have kind of blow.
I believe the blue/green wired connector is cruise control, but it is not installed anymore so I should be able to backtrace this and terminate it? This four wire and three post plug is Red, Orange, Tan/white and Brown/white....not sure what it goes to. My guess was originally the blower motor but the last time I looked I didn't believe all the wires were correct. Maybe I don't have the best diagrams.
__________________
1978 Chevy 2wd Stepside aka "Audrey" Cordova brown with mandarin guts 79k original miles & being restored 1979 Chevy 2wd Short Wide aka "Emma-Jayne" Cordova brown with mandarin guts 2019 Chevy Tahoe LT Previous rides: -2002 Firehawk T/A, 2006 Trailblazer SS AWD, 2014 GMC Sierra RCSB, 1971 2wd Blazer, 1996 SNB, 1997 2dr 2wd Yukon, 2001 Silverado RCSB, 2011 Silverado Z71 4x4, 1982 2wd Blazer, 1997 2dr Tahoe, 1970 Chevelle SS, 1972 2wd Blazer, 1986 Silverado Stepside, 1995 S-10, 1985 Silverado SWB. Last edited by BabyBlue; 06-11-2020 at 01:37 PM. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|