|
|
|
06-11-2018, 12:29 PM
|
#1 |
|
Registered User
 Join Date: Nov 2015
Location: Gulfport,MS
Posts: 63
|
Suspension question.
Wondering if anyone else has encountered this. 72 k10 that I believe is stock height. Front springs are completely flat but sit about 1/16 above my steering stabilizer. Whenever I go over bumps it smacks it. How do I remedy without adding a big ole lift?
Thanks in advance Posted via Mobile Device |
|
|
|
06-11-2018, 04:20 PM
|
#2 |
|
Senior Member
Join Date: Mar 2003
Location: Colfax-California
Posts: 8,382
|
Re: Suspension question.
Put a 3rd factory leaf in it, it will raise it about 1-2''
|
|
|
|
|
06-13-2018, 02:39 PM
|
#3 |
|
Registered User
Join Date: Jul 2010
Location: Knoxville,TN
Posts: 1,191
|
Re: Suspension question.
You also need to check the spring eye bushings and shackle frame bushings. If your spring pack has only 2 leafs you can add the option 3 leaf. The stock spring are flat to neg arch but if there broken down than you can buy new stock spring or a 2" lift springs.
Measure from the bump stop to the top of the leaf spring top plate. Thanks
__________________
1972 Custom Deluxe 20 4x4 burb 1971 GMC SWB CST 4x4 1972 GMC k20 4x4 (X- brush truck ) 1971 Chevy CST Blazer 4x4 1971 Chevy C/10 1970 Cab Chassis C30 157" 1971 Cab Chassis Custom 30 Deluxe 157" 292/4spd ( Napco Replica ) 1988 Chevy V30 4x4 wrecker challenger 4812 |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
