The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > Heavy Haulers

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-15-2017, 07:44 PM   #376
83GMCK2500
Registered User
 
Join Date: Sep 2009
Location: Beaverton, OR from WA State
Posts: 1,514
Re: The Ulitmate Craigslist find thread

1969 GMC cabover cab over 5 ton ramp truck tow truck - $3500 (Graham, WA)

Small block V6 engine that is not operational due to starter..

2 speed rear end...

Tilt cab for easy access to the engine

It was originally designed to haul backhoes and tractors...

I just purchased this truck and I am trying to get it going the more money I put into it..... I'm going to eventually have to raise the price

Maybe I could be used for a car hauler or tow truck

I don't have the ramps that go on the tail end

I believe the engine is a 305 with super High torque

The bed is 16 ft long

Perfect vehicle for off-road racing truck transportation

I don't know what the gears are but I talked to the owner and they say that's the truck would go 85 miles per hour with a Tractor on it

I'll be out there during the weekends working on it if you want to take a look sometime


Link: https://seattle.craigslist.org/tac/h...302821356.html
Attached Images
     
__________________
Devin

1983 GMC High Sierra 2500, 4x4, RC/LB, 400 S.B., SM-465, NP-208, Corporate 10 bolt & 9.5" 14 bolt
1996 GMC Sierra SLE 3500 DRW, 4x4, EC/LB, Vortec 454, NV-4500, BW-4401, AAM 925 & AAM 1050
1997 GMC Sierra SLT 1500 4x4, Z71/F44, EC/SB, Vortec 350

My Introduction with my '83s History
New Daily, the '96
83GMCK2500 is offline   Reply With Quote
Old 09-15-2017, 08:06 PM   #377
C10 - C90 Bill
Registered User
 
C10 - C90 Bill's Avatar
 
Join Date: Nov 2001
Location: Moneta, VA USA
Posts: 3,058
Re: The Ulitmate Craigslist find thread

Engine should be bigger than a 305 in a 7500, if it still has the original.

Really should be a 401. Maybe even a 478.
__________________
'60-'72 Chev/GMC Fan
GMC 9500 Fan
Detroit Diesel Fan
C10 - C90 Bill is offline   Reply With Quote
Old 09-16-2017, 01:43 AM   #378
NoStopN
Registered User
 
NoStopN's Avatar
 
Join Date: Jul 2016
Location: Murfreesboro, TN
Posts: 229
Re: The Ulitmate Craigslist find thread

They had me until I saw the cab-over. Seattle doesn't help either.
__________________
1969 GMC 2500. 250 I6, 4-speed w/ granny low
NoStopN is offline   Reply With Quote
Old 09-23-2017, 10:42 AM   #379
Okiefromwatonga
Registered User
 
Join Date: Jun 2015
Location: Watonga, OK
Posts: 80
Re: The Ulitmate Craigslist find thread

Ok, here is one if it had a 6V53 or 6V71 in it I would grab it my self.
https://oklahomacity.craigslist.org/...297444147.html

P.S. now that photobucket has gone full Nazi, how do we share pictures?
Okiefromwatonga is offline   Reply With Quote
Old 09-23-2017, 11:02 AM   #380
HO455
Post Whore
 
HO455's Avatar
 
Join Date: Feb 2016
Location: Portland Oregon
Posts: 10,723
Re: The Ulitmate Craigslist find thread

Quote:
Originally Posted by Okiefromwatonga View Post
Ok, here is one if it had a 6V53 or 6V71 in it I would grab it my self.
https://oklahomacity.craigslist.org/...297444147.html

P.S. now that photobucket has gone full Nazi, how do we share pictures?
You have to open the " manage attachments" box. Then copy the image off Craigslist and paste it to "Upload File from a URL" . This will only accept files below a certain level of quality. So you have to copy the low def version of the photo from Craigslist. Then two at a time upload them to the site. You can do five photos to each post. It won't allow copyrighted photos to post either. Hope that helps.
Here are two from your previous post.
Attached Images
  
__________________
Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help.
RIP Bob Parks.
1967 Burban the WMB,1991 S(stink)-10 Blazer,1969 GTO, 1970 Javelin, 1952 F2 Ford 4X4, 29 Model A, 72 Firebird. 85 Alfa Romeo
If it breaks I didn't want it in the first place
The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377
HO455 is offline   Reply With Quote
Old 09-23-2017, 05:30 PM   #381
C10 - C90 Bill
Registered User
 
C10 - C90 Bill's Avatar
 
Join Date: Nov 2001
Location: Moneta, VA USA
Posts: 3,058
Re: The Ulitmate Craigslist find thread

Worth it if only good for parts, but it could be very restorable.
__________________
'60-'72 Chev/GMC Fan
GMC 9500 Fan
Detroit Diesel Fan
C10 - C90 Bill is offline   Reply With Quote
Old 09-24-2017, 03:26 AM   #382
Softpatch
Registered User
 
Softpatch's Avatar
 
Join Date: Sep 2013
Location: Vashon WA
Posts: 969
Re: The Ulitmate Craigslist find thread


.
.
Quote:
Originally Posted by Okiefromwatonga View Post
Ok, here is one if it had a 6V53 or 6V71 in it I would grab it my self.
https://oklahomacity.craigslist.org/...297444147.html

P.S. now that photobucket has gone full Nazi, how do we share pictures?
.
Thanks to a great member I gift has been bestowed an us
.........A patch if your running chrome THANKS Orge
.
http://67-72chevytrucks.com/vboard/s...d.php?t=746732
.
.
__________________
My Spelling is Not Incorrect...It's 'Creative'
.
.
1966 C-20 .....Swap 91 G-30(5.7 FI)/4L80E
http://67-72chevytrucks.com/vboard/s...d.php?t=789617
59 Viking Revival .. http://67-72chevytrucks.com/vboard/s...d.php?t=632341
Softpatch is offline   Reply With Quote
Old 09-24-2017, 03:28 AM   #383
Softpatch
Registered User
 
Softpatch's Avatar
 
Join Date: Sep 2013
Location: Vashon WA
Posts: 969
Re: The Ulitmate Craigslist find thread


.
.
Quote:
Originally Posted by 83GMCK2500 View Post
1969 GMC cabover cab over 5 ton ramp truck tow truck - $3500 (Graham, WA)

Small block V6 engine that is not operational due to starter..

2 speed rear end...

Tilt cab for easy access to the engine

It was originally designed to haul backhoes and tractors...

I just purchased this truck and I am trying to get it going the more money I put into it..... I'm going to eventually have to raise the price

Maybe I could be used for a car hauler or tow truck

I don't have the ramps that go on the tail end

I believe the engine is a 305 with super High torque

The bed is 16 ft long

Perfect vehicle for off-road racing truck transportation

I don't know what the gears are but I talked to the owner and they say that's the truck would go 85 miles per hour with a Tractor on it

I'll be out there during the weekends working on it if you want to take a look sometime


Link: https://seattle.craigslist.org/tac/h...302821356.html
.
.
.
.
.
This is so cool...I want to drive this......Sp
.
.
.
.
__________________
My Spelling is Not Incorrect...It's 'Creative'
.
.
1966 C-20 .....Swap 91 G-30(5.7 FI)/4L80E
http://67-72chevytrucks.com/vboard/s...d.php?t=789617
59 Viking Revival .. http://67-72chevytrucks.com/vboard/s...d.php?t=632341
Softpatch is offline   Reply With Quote
Old 11-12-2017, 09:48 PM   #384
factorystock
Registered User
 
factorystock's Avatar
 
Join Date: Feb 2007
Location: west coast
Posts: 3,340
Re: The Ulitmate Craigslist find thread

I'm drooling over this barn find, a low mileage, super clean west coast '65 C 80 with Budds and air brakes at a very reasonable price. ( not mine ) https://sfbay.craigslist.org/nby/cto...381595270.html Can't get over the C80 thing, most were used commercially racking the mileage real quick. Most farm trucks of this vintage are the lesser rated C50 or C 60. I guessing 348 or 409? This needs to go to a good home of a Chevy truck nut.
factorystock is offline   Reply With Quote
Old 11-12-2017, 10:29 PM   #385
C10 - C90 Bill
Registered User
 
C10 - C90 Bill's Avatar
 
Join Date: Nov 2001
Location: Moneta, VA USA
Posts: 3,058
Re: The Ulitmate Craigslist find thread

Cool truck.

Sheet Metal looks great.

Mostly likely a 409. Believe it has to be at least a 348.

Full Instrumentation too. Looks like it has a Tach.

Looks like nice Heavy Front Springs the way it is sitting like that, especially having that heavy engine in there.

Would love to have it too, lol.

Would make a great Roll Back.
__________________
'60-'72 Chev/GMC Fan
GMC 9500 Fan
Detroit Diesel Fan
C10 - C90 Bill is offline   Reply With Quote
Old 11-13-2017, 12:50 AM   #386
NoStopN
Registered User
 
NoStopN's Avatar
 
Join Date: Jul 2016
Location: Murfreesboro, TN
Posts: 229
Re: The Ulitmate Craigslist find thread

I agree with you on all points Bill.
__________________
1969 GMC 2500. 250 I6, 4-speed w/ granny low
NoStopN is offline   Reply With Quote
Old 11-13-2017, 08:21 PM   #387
83GMCK2500
Registered User
 
Join Date: Sep 2009
Location: Beaverton, OR from WA State
Posts: 1,514
Re: The Ulitmate Craigslist find thread

Quote:
Originally Posted by factorystock View Post
I'm drooling over this barn find, a low mileage, super clean west coast '65 C 80 with Budds and air brakes at a very reasonable price. ( not mine ) https://sfbay.craigslist.org/nby/cto...381595270.html Can't get over the C80 thing, most were used commercially racking the mileage real quick. Most farm trucks of this vintage are the lesser rated C50 or C 60. I guessing 348 or 409? This needs to go to a good home of a Chevy truck nut.
Here's the pics from that link.
Attached Images
     
__________________
Devin

1983 GMC High Sierra 2500, 4x4, RC/LB, 400 S.B., SM-465, NP-208, Corporate 10 bolt & 9.5" 14 bolt
1996 GMC Sierra SLE 3500 DRW, 4x4, EC/LB, Vortec 454, NV-4500, BW-4401, AAM 925 & AAM 1050
1997 GMC Sierra SLT 1500 4x4, Z71/F44, EC/SB, Vortec 350

My Introduction with my '83s History
New Daily, the '96
83GMCK2500 is offline   Reply With Quote
Old 11-13-2017, 08:23 PM   #388
83GMCK2500
Registered User
 
Join Date: Sep 2009
Location: Beaverton, OR from WA State
Posts: 1,514
Re: The Ulitmate Craigslist find thread

Ohhhhhh yes, here's a little beauty.

GMC Dump truck - $5000 (Link)

1955 GMC 660 dump truck, 4-71 Detroit Diesel. Runs good. $5,000 obo.
Call *** after 11 a.m. for details.
Attached Images
  
__________________
Devin

1983 GMC High Sierra 2500, 4x4, RC/LB, 400 S.B., SM-465, NP-208, Corporate 10 bolt & 9.5" 14 bolt
1996 GMC Sierra SLE 3500 DRW, 4x4, EC/LB, Vortec 454, NV-4500, BW-4401, AAM 925 & AAM 1050
1997 GMC Sierra SLT 1500 4x4, Z71/F44, EC/SB, Vortec 350

My Introduction with my '83s History
New Daily, the '96
83GMCK2500 is offline   Reply With Quote
Old 11-15-2017, 12:19 PM   #389
factorystock
Registered User
 
factorystock's Avatar
 
Join Date: Feb 2007
Location: west coast
Posts: 3,340
Re: The Ulitmate Craigslist find thread

Quote:
Originally Posted by 83GMCK2500 View Post
Here's the pics from that link.
Thanks for posting the photos Devin!, still learning the ropes. Most of my experience in trucks is in the '63-'66 era, and this is one of the best non fire 80's I've seen. GVW is not much more than a heavy 60 series, but you get the 18.K rear axle and 7k or 9K front axle. There was a 23K rear and 11k front axle options but these axles were usually only spec'd on heavy duty tractors, which are almost impossible to find in the condition of this 80.
factorystock is offline   Reply With Quote
Old 11-15-2017, 12:25 PM   #390
Gypsyman
Registered User
 
Join Date: Jan 2016
Location: Newman Lake WA
Posts: 39
Re: The Ulitmate Craigslist find thread

Quote:
Originally Posted by C10 - C90 Bill View Post
Cool truck.

Sheet Metal looks great.

Mostly likely a 409. Believe it has to be at least a 348.

Full Instrumentation too. Looks like it has a Tach.

Looks like nice Heavy Front Springs the way it is sitting like that, especially having that heavy engine in there.

Would love to have it too, lol.

Would make a great Roll Back.
After two months of asking the seller finally sent me engine photos...
Attached Images
    
__________________
Richard
Gypsyman is offline   Reply With Quote
Old 11-15-2017, 01:25 PM   #391
C10 - C90 Bill
Registered User
 
C10 - C90 Bill's Avatar
 
Join Date: Nov 2001
Location: Moneta, VA USA
Posts: 3,058
Re: The Ulitmate Craigslist find thread

Looks good.

Also has Power Steering.

Are you going to try to buy it?
__________________
'60-'72 Chev/GMC Fan
GMC 9500 Fan
Detroit Diesel Fan
C10 - C90 Bill is offline   Reply With Quote
Old 11-15-2017, 01:38 PM   #392
Gypsyman
Registered User
 
Join Date: Jan 2016
Location: Newman Lake WA
Posts: 39
Re: The Ulitmate Craigslist find thread

I've tried on and off. He won't budge on the price and it's tough when you can't see them in person. If I've learned anything from Craigslist it's that everything looks much better in pictures than in person.

My attention right now is on this '64 GMC. Body looks solid but, again, the seller won't take the time to send photos of the passenger side of the truck. It's only 150 miles from me so I'm going to try to look at it in the next week or two.
Attached Images
    
__________________
Richard
Gypsyman is offline   Reply With Quote
Old 11-15-2017, 03:08 PM   #393
C10 - C90 Bill
Registered User
 
C10 - C90 Bill's Avatar
 
Join Date: Nov 2001
Location: Moneta, VA USA
Posts: 3,058
Re: The Ulitmate Craigslist find thread

Interesting truck, but it's not a '64.

I'm going to say that it's a '62.

By the way, that '65 C-80 is worth every bit of what he is asking for it.

If it were near by me, I'd be bringing it home for sure.
__________________
'60-'72 Chev/GMC Fan
GMC 9500 Fan
Detroit Diesel Fan
C10 - C90 Bill is offline   Reply With Quote
Old 11-15-2017, 03:27 PM   #394
Gypsyman
Registered User
 
Join Date: Jan 2016
Location: Newman Lake WA
Posts: 39
Re: The Ulitmate Craigslist find thread

I was going by the sellers listing for the model year.

I agree that the C-80 is worth the asking price but (realistically) I still have to factor in $1700+ in transportation to get it here.
__________________
Richard
Gypsyman is offline   Reply With Quote
Old 11-15-2017, 03:35 PM   #395
C10 - C90 Bill
Registered User
 
C10 - C90 Bill's Avatar
 
Join Date: Nov 2001
Location: Moneta, VA USA
Posts: 3,058
Re: The Ulitmate Craigslist find thread

Quote:
Originally Posted by Gypsyman View Post
I was going by the sellers listing for the model year.

I agree that the C-80 is worth the asking price but (realistically) I still have to factor in $1700+ in transportation to get it here.
If you found the right trucker, you might be able to get a back haul for about $500.

Especially if the owner could help load.

A Drop Deck Trailer would work the best.

Just saying, lol.
__________________
'60-'72 Chev/GMC Fan
GMC 9500 Fan
Detroit Diesel Fan
C10 - C90 Bill is offline   Reply With Quote
Old 11-15-2017, 03:39 PM   #396
Gypsyman
Registered User
 
Join Date: Jan 2016
Location: Newman Lake WA
Posts: 39
Re: The Ulitmate Craigslist find thread

That's what I've been looking for. A back haul.

I also ran across this old girl.

For sale is a rolling cab and chassis with 502 big-block engine, 5 speed transmission, and 3 speed auxiliary transmission. Engine runs great and truck is street legal. Call 831.423.5287

https://sfbay.craigslist.org/scz/cto...356933195.html
Attached Images
 
__________________
Richard
Gypsyman is offline   Reply With Quote
Old 11-15-2017, 03:53 PM   #397
Nobighurry
Registered User
 
Join Date: May 2017
Location: Lexington SC
Posts: 119
Re: The Ulitmate Craigslist find thread

how about a tow??? not a bad deal for $3k.

https://columbia.craigslist.org/hvo/...386843442.html
Attached Images
     
Nobighurry is offline   Reply With Quote
Old 11-15-2017, 07:02 PM   #398
Airdirect
Registered User
 
Join Date: Oct 2016
Location: Powderly Texas
Posts: 290
Re: The Ulitmate Craigslist find thread

Quote:
Originally Posted by 83GMCK2500 View Post
Here's the pics from that link.
Wow, the 80 series Chevrolet is an incredible "barn find". I expect that some washing and buffing would have it looking great! Very rare truck with great options.
Airdirect is offline   Reply With Quote
Old 11-16-2017, 01:40 PM   #399
83GMCK2500
Registered User
 
Join Date: Sep 2009
Location: Beaverton, OR from WA State
Posts: 1,514
Re: The Ulitmate Craigslist find thread

I feel like Bill is really gonna dig this one. I know I do...diff lock and interlock? This old beast has done some work.

GMC 12 yard tandem 15 speed - $4500 (Idaho Springs) (Link)

Big V-6
5 speed trans. plus 3 speed transfer case
3 reverse gears 15 foward
3 stage cylinder
airlock twin screw rears
Attached Images
     
__________________
Devin

1983 GMC High Sierra 2500, 4x4, RC/LB, 400 S.B., SM-465, NP-208, Corporate 10 bolt & 9.5" 14 bolt
1996 GMC Sierra SLE 3500 DRW, 4x4, EC/LB, Vortec 454, NV-4500, BW-4401, AAM 925 & AAM 1050
1997 GMC Sierra SLT 1500 4x4, Z71/F44, EC/SB, Vortec 350

My Introduction with my '83s History
New Daily, the '96
83GMCK2500 is offline   Reply With Quote
Old 11-16-2017, 01:42 PM   #400
83GMCK2500
Registered User
 
Join Date: Sep 2009
Location: Beaverton, OR from WA State
Posts: 1,514
Re: The Ulitmate Craigslist find thread

Quote:
Originally Posted by 83GMCK2500 View Post
I feel like Bill is really gonna dig this one. I know I do...diff lock and interlock? This old beast has done some work.

GMC 12 yard tandem 15 speed - $4500 (Idaho Springs) (Link)

Big V-6
5 speed trans. plus 3 speed transfer case
3 reverse gears 15 foward
3 stage cylinder
airlock twin screw rears
Part 2
Attached Images
     
__________________
Devin

1983 GMC High Sierra 2500, 4x4, RC/LB, 400 S.B., SM-465, NP-208, Corporate 10 bolt & 9.5" 14 bolt
1996 GMC Sierra SLE 3500 DRW, 4x4, EC/LB, Vortec 454, NV-4500, BW-4401, AAM 925 & AAM 1050
1997 GMC Sierra SLT 1500 4x4, Z71/F44, EC/SB, Vortec 350

My Introduction with my '83s History
New Daily, the '96
83GMCK2500 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:26 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com