The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-09-2015, 12:31 PM   #1
mobileortho
Registered User
 
mobileortho's Avatar
 
Join Date: Sep 2008
Location: Hampton, VA
Posts: 868
Bolt on mustang ii

Looking to make a few changes to my truck over the winter, one of which is to lower it a bit more and run bigger tires/ rims. Currently using the ifs from a '79 half ton with dropped spindles & cut coils which has worked fine for my current setup, but looking at the lower control arms the scrub line would be too dangerous.

I'd been looking into the bolt on unit from Speedway Motors Part # 91044754, but recently came across what looks to be the identical setup on EBay sold by Gearhead World item # 201453764942 for considerably less. Anyone familiar with them?
__________________
Robert C.

1950 3600
3600 re-do, shortening it up

If it's true what they say, "You learn from your mistakes,"
I'm a Genius in the making.
mobileortho is offline   Reply With Quote
Old 12-09-2015, 12:39 PM   #2
YukonXL04
Registered User
 
YukonXL04's Avatar
 
Join Date: Jun 2015
Location: Arlington, TX
Posts: 92
Re: Bolt on mustang ii

Got any pics on your current setup? How well do wheels fit without narrowing the front end?
YukonXL04 is offline   Reply With Quote
Old 12-09-2015, 12:59 PM   #3
mobileortho
Registered User
 
mobileortho's Avatar
 
Join Date: Sep 2008
Location: Hampton, VA
Posts: 868
Re: Bolt on mustang ii

There are some on my album page.
__________________
Robert C.

1950 3600
3600 re-do, shortening it up

If it's true what they say, "You learn from your mistakes,"
I'm a Genius in the making.
mobileortho is offline   Reply With Quote
Old 12-09-2015, 02:35 PM   #4
shrek55
Registered User
 
Join Date: Oct 2010
Location: West New York, NJ
Posts: 65
Re: Bolt on mustang ii

Ask Gearhead World who makes it. It looks EXACTLY like the Speedway kit I put in my 55 1st
shrek55 is offline   Reply With Quote
Old 12-09-2015, 02:37 PM   #5
shrek55
Registered User
 
Join Date: Oct 2010
Location: West New York, NJ
Posts: 65
Talking Re: Bolt on mustang ii

By the way, Speedway has instructions online
shrek55 is offline   Reply With Quote
Old 12-09-2015, 03:39 PM   #6
mobileortho
Registered User
 
mobileortho's Avatar
 
Join Date: Sep 2008
Location: Hampton, VA
Posts: 868
Re: Bolt on mustang ii

Quote:
Originally Posted by shrek55 View Post
By the way, Speedway has instructions online
Yeah, I know, I downloaded them yesterday. I did call Gearhead, I think it's the same kit for almost half the price!
__________________
Robert C.

1950 3600
3600 re-do, shortening it up

If it's true what they say, "You learn from your mistakes,"
I'm a Genius in the making.

Last edited by mobileortho; 12-09-2015 at 03:44 PM.
mobileortho is offline   Reply With Quote
Old 12-09-2015, 04:11 PM   #7
mobileortho
Registered User
 
mobileortho's Avatar
 
Join Date: Sep 2008
Location: Hampton, VA
Posts: 868
Re: Bolt on mustang ii

Quote:
Originally Posted by shrek55 View Post
Ask Gearhead World who makes it. It looks EXACTLY like the Speedway kit I put in my 55 1st
How'd it work out for you? Any pics?
__________________
Robert C.

1950 3600
3600 re-do, shortening it up

If it's true what they say, "You learn from your mistakes,"
I'm a Genius in the making.

Last edited by mobileortho; 12-09-2015 at 04:17 PM.
mobileortho is offline   Reply With Quote
Old 12-09-2015, 05:41 PM   #8
67GMCkid
Registered User
 
67GMCkid's Avatar
 
Join Date: Jun 2012
Location: Etters Pa
Posts: 197
Re: Bolt on mustang ii

I confess, I bought the gearhead set up and used the Speedway instructions..
The gearhead set up comes with all the bolts and they are a size smaller than what the SW instructions call for, other than that it was a simple upgrade.. I will be using the SW bolt in motor mount kit that fits the cross member..

On second thought it came, with a bottom shelf brand of bearings but for what it saved in $$ I will replace bearings,Ball Joints and brake pads before it hits the streets. They would be fine I'm sure, I'm just anal on some parts..

Last edited by 67GMCkid; 12-09-2015 at 05:48 PM.
67GMCkid is offline   Reply With Quote
Old 12-28-2015, 10:37 AM   #9
mobileortho
Registered User
 
mobileortho's Avatar
 
Join Date: Sep 2008
Location: Hampton, VA
Posts: 868
Re: Bolt on mustang ii

Got mine in over the weekend & based on the instructions from SW, it looks pretty simple. Haven't ordered the components yet, EBay has one I'll more than likely go with.
Attached Images
 
__________________
Robert C.

1950 3600
3600 re-do, shortening it up

If it's true what they say, "You learn from your mistakes,"
I'm a Genius in the making.
mobileortho is offline   Reply With Quote
Old 12-28-2015, 02:52 PM   #10
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,242
Re: Bolt on mustang ii

I saw the one that the predecessor company of Premier street rods sold on a display chassis a number of years ago and was impressed with it. No matter which one you get I still like the idea that you can do it with a tape measure, half inch electric drill and hand full of wrenches and it doesn't require any high degree of skill.

It sure beats the snot out of those "universal" where do I cut it and how much kits for almost the same price.
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Old 12-28-2015, 04:26 PM   #11
67GMCkid
Registered User
 
67GMCkid's Avatar
 
Join Date: Jun 2012
Location: Etters Pa
Posts: 197
Re: Bolt on mustang ii

So, you went with the Gearhead Set up or did you go with the speedway unit ?
67GMCkid is offline   Reply With Quote
Old 12-28-2015, 09:27 PM   #12
mobileortho
Registered User
 
mobileortho's Avatar
 
Join Date: Sep 2008
Location: Hampton, VA
Posts: 868
Re: Bolt on mustang ii

Quote:
Originally Posted by 67GMCkid View Post
So, you went with the Gearhead Set up or did you go with the speedway unit ?
Went with the Gearhead unit, ordered the bolt in motor mounts from SW, they should be here tomorrow. Found another seller eBay with a kit for $889 that includes:

Remanufactured Power Rack
Upper and lower Tubular Control Arms w/ Tubes and Gussets
Tie Rod Ends
Rack bushings & bolts
GM Metric Calipers
Caliper Brackets
Heavy duty shocks (may not be blue as pictured, color may vary)
Coil Springs
2" Drop spindles
11" CROSS DRILLED SLOTTED Chevy (5x4 3/4") pattern rotors
Spindle Nut Kit
Upper A-Arm T-Bolts
Spring Cushions
Rack Bolts
Tie Rod Ends
Rack Bushings
Bearings, Seals, Dust Caps

I'm ordering the brake lines, power steering pressure reducer & heim joint from Speedway.
__________________
Robert C.

1950 3600
3600 re-do, shortening it up

If it's true what they say, "You learn from your mistakes,"
I'm a Genius in the making.
mobileortho is offline   Reply With Quote
Old 12-28-2015, 10:50 PM   #13
67GMCkid
Registered User
 
67GMCkid's Avatar
 
Join Date: Jun 2012
Location: Etters Pa
Posts: 197
Re: Bolt on mustang ii

Don't know if it's true or not? I have hears Gearhead sells on the bay under several different names..

I thought I bought mine from gearheads but I just looked it came from rodpartsdealer


The kit you are getting is close to the one I bought but mine came with a manual rack, I didn't get the drilled/slotted rotors and I chose the stock height spindles..

I did get the cross member with the kit, I ended up with 1,339 in the kit and $229.00 in shipping of the 6 heavy boxes..

I'm sure I will be upgrading at least Bearings,seals before it hits the road but for the $ I think it was a decent kit.. time will tell
Attached Images
 
67GMCkid is offline   Reply With Quote
Old 12-28-2015, 11:32 PM   #14
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,242
Re: Bolt on mustang ii

From what I have read you are pretty well 67GMCKid. I've ordered pieces from them at times and had good service. I'm not sure about the strategy for selling under several names on Ebay unless it's to reach different markets.

Years ago I used to order engine parts from a parts house with a well known drag racers name on it that advertised in the back of Hot Rod and they always came with a receipt from a wholesale warehouse. I was getting the price that the parts houses got if they ordered the parts and it was their way of doing retail sales out the back door.
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Old 12-29-2015, 12:33 AM   #15
dwcsr
Hollister Road Co.
 
dwcsr's Avatar
 
Join Date: Apr 2005
Location: Houston
Posts: 6,134
Re: Bolt on mustang ii

rodparts, gear head and about 9 others are the same company. When the feed back get to bad they fold it up and start up under a new name
dwcsr is offline   Reply With Quote
Old 12-29-2015, 11:18 AM   #16
mobileortho
Registered User
 
mobileortho's Avatar
 
Join Date: Sep 2008
Location: Hampton, VA
Posts: 868
Re: Bolt on mustang ii

Quote:
Originally Posted by 67GMCkid View Post

The kit you are getting is close to the one I bought but mine came with a manual rack, I didn't get the drilled/slotted rotors and I chose the stock height spindles..

I did get the cross member with the kit, I ended up with 1,339 in the kit and $229.00 in shipping of the 6 heavy boxes..

I'm sure I will be upgrading at least Bearings,seals before it hits the road but for the $ I think it was a decent kit.. time will tell
I opted for the power rack package, the cross member was on sale for $375 with free shipping, the rest of the kit was $889 + $159 for shipping. I spent another $140 for the brake lines, power steering lines & pressure reducer so all totaled about $1533.

Have you started your install yet?

Quote:
Originally Posted by dwcsr View Post
rodparts, gear head and about 9 others are the same company. When the feed back get to bad they fold it up and start up under a new name
I hope I don't run into any issues. I called them to ask questions and the customer service was good. We shall see how it goes.
__________________
Robert C.

1950 3600
3600 re-do, shortening it up

If it's true what they say, "You learn from your mistakes,"
I'm a Genius in the making.
mobileortho is offline   Reply With Quote
Old 12-29-2015, 12:58 PM   #17
solidaxel
Registered User
 
solidaxel's Avatar
 
Join Date: Dec 2002
Location: Cactus Patch So. Az
Posts: 4,749
Re: Bolt on mustang ii

Good Info, thanks
__________________
53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD)
53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25
55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73
62 Solidaxle Corvette Roman Red (327
340hp 4spd 3:36) C4 & C5 suspension tube chassis
LS 3 4L70E
65 Corvette Coupe 327 350hp 4spd 4:11
78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42
2000 S-Type 3.0 (wife cruiser)
2003 GMC SCSB 5.3 4L60E 3:42
solidaxel is offline   Reply With Quote
Old 12-29-2015, 06:58 PM   #18
tmoble
Registered User
 
Join Date: Feb 2009
Location: Glendale, Az
Posts: 1,062
Re: Bolt on mustang ii

how do you bolt in a notch in the frame rail?
tmoble is offline   Reply With Quote
Old 12-29-2015, 07:09 PM   #19
67GMCkid
Registered User
 
67GMCkid's Avatar
 
Join Date: Jun 2012
Location: Etters Pa
Posts: 197
Re: Bolt on mustang ii

Only issue I had was everything (5) of the 6 boxes shipped in a day or so of payment. When the boxes got here there was a note in one box that the rotors would ship later, so a week later I called them to find out when I was going to receive them. The CS woman put me on hold for about 3 minutes when she came back she said I would have them in 2 Days and I did!

Had I of thought the whole thing out in advance instead of flying by the seat of my pants, I would have just bought a set of set of 11" Granada rotors locally and ordered My new ralleys to fit the 4-1/2 ford bolt pattern, it would have made things a lot cheaper in the future when a rotor needs replaced... If you check your bearing sizes you will find your rotors are 11" Granada drilled with the Chevy pattern ..

The worst parts of the whole install was the weeks worth of scraping, chiseling and scrubbing the dried sand filled grease off the frame and the stuff they had the parts coated in made me itch and scratch for a week after the job was done.
Attached Images
 
67GMCkid is offline   Reply With Quote
Old 12-29-2015, 08:44 PM   #20
Russell Ashley
Registered User
 
Russell Ashley's Avatar
 
Join Date: May 2010
Location: Lawrenceville, Ga
Posts: 2,640
Re: Bolt on mustang ii

" If you check your bearing sizes you will find your rotors are 11" Granada drilled with the Chevy pattern .."

I believe that most all of the kits come with those. A few years back I put the CPP disk kit on my 57 straight axle, then I replaced it with a Scott's front end, and both had the same rotors.
Russell Ashley is offline   Reply With Quote
Old 12-29-2015, 10:19 PM   #21
mobileortho
Registered User
 
mobileortho's Avatar
 
Join Date: Sep 2008
Location: Hampton, VA
Posts: 868
Re: Bolt on mustang ii

Quote:
Originally Posted by 67GMCkid View Post
If you check your bearing sizes you will find your rotors are 11" Granada drilled with the Chevy pattern ..
I was wondering about that! Glad you cleared that up! That about the calipers, any idea what they are?

Yours is looking good! My components won't be here til next but I'm gonna start tearing mine down tomorrow.
__________________
Robert C.

1950 3600
3600 re-do, shortening it up

If it's true what they say, "You learn from your mistakes,"
I'm a Genius in the making.
mobileortho is offline   Reply With Quote
Old 12-29-2015, 10:36 PM   #22
67GMCkid
Registered User
 
67GMCkid's Avatar
 
Join Date: Jun 2012
Location: Etters Pa
Posts: 197
Re: Bolt on mustang ii

Calipers appear to be S-10
67GMCkid is offline   Reply With Quote
Old 12-30-2015, 12:51 AM   #23
mobileortho
Registered User
 
mobileortho's Avatar
 
Join Date: Sep 2008
Location: Hampton, VA
Posts: 868
Re: Bolt on mustang ii

Ok, thanks. One more question.... I'm looking over the instructions and it says to trim the radiator support for rack clearance but it doesn't really say how much. About how much did you remove from yours?
__________________
Robert C.

1950 3600
3600 re-do, shortening it up

If it's true what they say, "You learn from your mistakes,"
I'm a Genius in the making.
mobileortho is offline   Reply With Quote
Old 12-30-2015, 06:05 AM   #24
67GMCkid
Registered User
 
67GMCkid's Avatar
 
Join Date: Jun 2012
Location: Etters Pa
Posts: 197
Re: Bolt on mustang ii

This thread has some good pictures.

http://67-72chevytrucks.com/vboard/s...d.php?t=685355

I went way overboard when I cut mine down, it looks nice but I may end up reworking it to add back some strength..
67GMCkid is offline   Reply With Quote
Old 12-30-2015, 08:50 AM   #25
shrek55
Registered User
 
Join Date: Oct 2010
Location: West New York, NJ
Posts: 65
Re: Bolt on mustang ii

My Speedway kit uses 69-72 GM A-body rotors with their own kit of bearings and races to mate GM rotor to Ford knuckle
shrek55 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:04 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com