PA 72 blazer 4-spd CST part out

[1rippen6]

Originally Posted by lks dcvn

How is the passenger side floor - I'm looking for the brace (under the floor) that the latch bolts into?

Also - how is the bucket seat brace that is under the floor?

Thanks.

PS floor brace is junk.

[1rippen6]

Originally Posted by K5 MAX

Interested in this area, inside the blue tape on the passenger side if its not roached out under the top
[IMG]123

Blazer has to set outside for 2 weeks maybe long so I'm letting the top on until I push it back in.

[1rippen6]

Originally Posted by Bigk5

Sound good I will be waiting

Here is everything you need but the hatch handle. The clips that hold the rods to the handle mechanism are not correct they should have a straight ear. They are always rusted to pieces, I will send 2 of each with opposite 90 degree ears, one or the other should work. The bottom handle cover has some pitting and areas that are gone. Please look at pictures carefully and if you need more just ask.

[1rippen6]

Here are the handles I was talking about 250 if interested.

[Bigk5]

I need the two brackets that are on the left and right side of the topper they are bolted to the hold down bracket for topper and the latches engage into them to keep it locked I also need passenger arm that holds up the topper

[Bigk5]

I sure would like a handle will you take 500 for everything including handle

[Bigk5]

Let me know what you think. if you don't have the passengers arm that holds up the hatch that's cool but I do want the handle and latch receivers thanks you alot

[Bigk5]

I will be waiting for pm to send payment thanks

[1rippen6]

Let me think about it, I'll let you know tomorrow.

[Bigk5]

Ok sounds great thanks

[1rippen6]

Originally Posted by Bigk5

Ok sounds great thanks

Sorry, I going to have to pass. The problem is I was keeping the parts for myself to rebuild the hatches I have. If I ever get to the point of rebuilding the hatches and need the parts I will have to replace them.

[Bigk5]

So your not looking to sell anything

[1rippen6]

Originally Posted by Bigk5

So your not looking to sell anything

I'll sell it am just not taking a lost to sell anything.

[Bigk5]

Ok can I get the parts for the hatch minus the handle and I will get a handle in tha next week or so after I get some more jingle

[1rippen6]

Originally Posted by Bigk5

Ok can I get the parts for the hatch minus the handle and I will get a handle in tha next week or so after I get some more jingle

Ok, I'll pm my pp info.

[Bigk5]

Ok sounds good I will be waiting

[1rippen6]

Originally Posted by Bigk5

Ok sounds good I will be waiting

You should have it let me know if you didn't receive it.

[Bigk5]

Payment sent thank you so much I will be in touch for the handle

[1rippen6]

Originally Posted by Bigk5

Payment sent thank you so much I will be in touch for the handle

Received, should ship out today.

[K5 MAX]

Originally Posted by 1rippen6

Blazer has to set outside for 2 weeks maybe long so I'm letting the top on until I push it back in.

Works for me, I'm not in a rush. PM me if you remember and I'll try to remember to check back here in a couple weeks. Still working on house repairs / upgrades after Hurricane Michael so it crazy town still over my way

[mgkgmc]

I'll pass on the roof rack thanks.

[Bigk5]

Thanks for the rear hatch parts they fit like a glove just installed them last night

[Bigk5]

I was also looking for a passenger side hatch strut it's the arm that holds up the hatch thanks

[1rippen6]

Originally Posted by Bigk5

I was also looking for a passenger side hatch strut it's the arm that holds up the hatch thanks

Sorry, no hatch struts at this time.

[1rippen6]

Originally Posted by K5 MAX

Works for me, I'm not in a rush. PM me if you remember and I'll try to remember to check back here in a couple weeks. Still working on house repairs / upgrades after Hurricane Michael so it crazy town still over my way

Finally removed the top looks decent but it does have a rust spot by the third top hold down hole.