BONZEYE's 86 C10 LONGBED - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BONZEYE · 02-17-2010, 12:13 PM

BONZEYE · 03-06-2010, 12:06 AM

I got the bed back on there....

Driveway Dreams · 03-06-2010, 12:12 AM

Looks good layed out with the bed back on. You got a picture of the inside of the bed while down?

BONZEYE · 03-06-2010, 02:33 AM

Ill take one tomorrow, i had to cut out the fender wells and the inside skin of the bed..

BONZEYE · 03-08-2010, 12:19 AM

Here is it laying down

BONZEYE · 03-08-2010, 12:21 AM

I got new upholstery. ..

BONZEYE · 03-08-2010, 12:23 AM

Driveway Dreams · 03-08-2010, 01:05 AM

Cool, but now I have a question...what are you gonna do for rear pictures if you go to a sport bumper or roll pan?

Looks like it is coming along well and really gaining some potential. Keep at it.

BONZEYE · 03-08-2010, 02:45 PM

I don't really know what you mean buy what i am going to do about rear pix..
Im planning on running that bumper as my scrapper till it ends up like a sport bumper. Cause i have another 3-4 inches of dropp still left in the bags when the bumper wastes away.. .

You should see my plan for the gas tank/air tank for the baggs..

Driveway Dreams · 03-08-2010, 03:17 PM

I was just curious if you would be able to lay out a sport bumper if you get one on. Spill the beans on your plans for tanks.

BONZEYE · 03-08-2010, 03:22 PM

I think it should, be pretty close though..

Im kinda on a budget on this build.. So to buy a fuel cell and air tank would get kind pricey.. So a buddie of mine gave me a 30 gallon air tank.. So the idea was to cut in open and weld a plate in the middle. Weld i back up.. Put a fill on the gas side, and my hozes on the air side.. I think that should work, cause the external fuel pump..

And to top it off i was planning on having a huge BUDLIGHT sticker printed to wrap around it too look like a bigg beer can in the back of the truck.. Should be interesting..

*87 chevy silverado* · 03-08-2010, 11:02 PM

more pics please

86er · 03-08-2010, 11:44 PM

very nice, u do great work, are u going to run rear shocks?

BONZEYE · 03-09-2010, 04:05 AM

87 chevy silverado

What is wrong with my pix???

BONZEYE · 03-09-2010, 04:06 AM

Ya i want to run rear shox eventually

bharrison1 · 03-09-2010, 11:24 AM

Quote:

Originally Posted by BONZEYE

just curious did you do something about the area between the bottom of the notch and the frame rail?any pics of that?

BONZEYE · 03-09-2010, 03:49 PM

I havent yet, I planned on cutting out a wedge n welding it in there and boxing in the section on the sides. A band saw would be great... It was kinda a weird shape in that section. And the frame changes from like 4" to about 3-2 1/2" on the other side..

*87 chevy silverado* · 03-31-2010, 07:28 PM

theres not enough i like it alot

BONZEYE · 04-01-2010, 01:00 PM

Thanks alot man... Im hoping this weekend i could put my front airbags on and get it rollin.. A buddy of mine gave me a simple solution for the front.. It was were i was kinda stuck for the moment..

BONZEYE · 06-24-2010, 01:41 PM

BONZEYE · 06-24-2010, 01:42 PM

??

BONZEYE · 06-29-2010, 11:38 AM

BONZEYE · 06-29-2010, 11:45 AM

*87 chevy silverado* · 09-13-2010, 07:58 PM

any up dates? looking good

*nbpro* · 09-13-2010, 08:45 PM

looks sweet Good luck with the build

02-17-2010, 12:13 PM	#26
BONZEYE Registered User Join Date: Oct 2009 Location: SAlinas, CA Posts: 36	Re: BONZEYE's 86 C10 LONGBED

03-06-2010, 12:06 AM	#27
BONZEYE Registered User Join Date: Oct 2009 Location: SAlinas, CA Posts: 36	Re: BONZEYE's 86 C10 LONGBED I got the bed back on there.... __________________ GO LOW OR GO HOME!!

03-06-2010, 12:12 AM	#28
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: BONZEYE's 86 C10 LONGBED Looks good layed out with the bed back on. You got a picture of the inside of the bed while down? __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

03-06-2010, 02:33 AM	#29
BONZEYE Registered User Join Date: Oct 2009 Location: SAlinas, CA Posts: 36	Re: BONZEYE's 86 C10 LONGBED Ill take one tomorrow, i had to cut out the fender wells and the inside skin of the bed.. __________________ GO LOW OR GO HOME!!

03-08-2010, 12:19 AM	#30
BONZEYE Registered User Join Date: Oct 2009 Location: SAlinas, CA Posts: 36	Re: BONZEYE's 86 C10 LONGBED Here is it laying down __________________ GO LOW OR GO HOME!!

03-08-2010, 12:21 AM	#31
BONZEYE Registered User Join Date: Oct 2009 Location: SAlinas, CA Posts: 36	Re: BONZEYE's 86 C10 LONGBED I got new upholstery. .. __________________ GO LOW OR GO HOME!!

03-08-2010, 12:23 AM	#32
BONZEYE Registered User Join Date: Oct 2009 Location: SAlinas, CA Posts: 36	Re: BONZEYE's 86 C10 LONGBED __________________ GO LOW OR GO HOME!!

03-08-2010, 01:05 AM	#33
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: BONZEYE's 86 C10 LONGBED Cool, but now I have a question...what are you gonna do for rear pictures if you go to a sport bumper or roll pan? Looks like it is coming along well and really gaining some potential. Keep at it. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

03-08-2010, 02:45 PM	#34
BONZEYE Registered User Join Date: Oct 2009 Location: SAlinas, CA Posts: 36	Re: BONZEYE's 86 C10 LONGBED I don't really know what you mean buy what i am going to do about rear pix.. Im planning on running that bumper as my scrapper till it ends up like a sport bumper. Cause i have another 3-4 inches of dropp still left in the bags when the bumper wastes away.. . You should see my plan for the gas tank/air tank for the baggs.. __________________ GO LOW OR GO HOME!!

03-08-2010, 03:17 PM	#35
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: BONZEYE's 86 C10 LONGBED I was just curious if you would be able to lay out a sport bumper if you get one on. Spill the beans on your plans for tanks. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

03-08-2010, 03:22 PM	#36
BONZEYE Registered User Join Date: Oct 2009 Location: SAlinas, CA Posts: 36	Re: BONZEYE's 86 C10 LONGBED I think it should, be pretty close though.. Im kinda on a budget on this build.. So to buy a fuel cell and air tank would get kind pricey.. So a buddie of mine gave me a 30 gallon air tank.. So the idea was to cut in open and weld a plate in the middle. Weld i back up.. Put a fill on the gas side, and my hozes on the air side.. I think that should work, cause the external fuel pump.. And to top it off i was planning on having a huge BUDLIGHT sticker printed to wrap around it too look like a bigg beer can in the back of the truck.. Should be interesting.. __________________ GO LOW OR GO HOME!!

03-08-2010, 11:02 PM	#37
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: BONZEYE's 86 C10 LONGBED more pics please

03-08-2010, 11:44 PM	#38
86er Registered User Join Date: Feb 2010 Location: Newton,Iowa Posts: 72	Re: BONZEYE's 86 C10 LONGBED very nice, u do great work, are u going to run rear shocks?

03-09-2010, 04:05 AM	#39
BONZEYE Registered User Join Date: Oct 2009 Location: SAlinas, CA Posts: 36	Re: BONZEYE's 86 C10 LONGBED 87 chevy silverado What is wrong with my pix??? __________________ GO LOW OR GO HOME!! Last edited by BONZEYE; 03-09-2010 at 04:21 AM.

03-09-2010, 04:06 AM	#40
BONZEYE Registered User Join Date: Oct 2009 Location: SAlinas, CA Posts: 36	Re: BONZEYE's 86 C10 LONGBED Ya i want to run rear shox eventually __________________ GO LOW OR GO HOME!!



Register or Log In To remove these advertisements.

03-09-2010, 03:49 PM	#42
BONZEYE Registered User Join Date: Oct 2009 Location: SAlinas, CA Posts: 36	Re: BONZEYE's 86 C10 LONGBED I havent yet, I planned on cutting out a wedge n welding it in there and boxing in the section on the sides. A band saw would be great... It was kinda a weird shape in that section. And the frame changes from like 4" to about 3-2 1/2" on the other side.. __________________ GO LOW OR GO HOME!!

03-31-2010, 07:28 PM	#43
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: BONZEYE's 86 C10 LONGBED theres not enough i like it alot

04-01-2010, 01:00 PM	#44
BONZEYE Registered User Join Date: Oct 2009 Location: SAlinas, CA Posts: 36	Re: BONZEYE's 86 C10 LONGBED Thanks alot man... Im hoping this weekend i could put my front airbags on and get it rollin.. A buddy of mine gave me a simple solution for the front.. It was were i was kinda stuck for the moment.. __________________ GO LOW OR GO HOME!!

06-24-2010, 01:41 PM	#45
BONZEYE Registered User Join Date: Oct 2009 Location: SAlinas, CA Posts: 36	Re: BONZEYE's 86 C10 LONGBED __________________ GO LOW OR GO HOME!!

06-24-2010, 01:42 PM	#46
BONZEYE Registered User Join Date: Oct 2009 Location: SAlinas, CA Posts: 36	Re: BONZEYE's 86 C10 LONGBED ?? __________________ GO LOW OR GO HOME!! Last edited by BONZEYE; 06-29-2010 at 11:50 AM. Reason: ??

06-29-2010, 11:38 AM	#47
BONZEYE Registered User Join Date: Oct 2009 Location: SAlinas, CA Posts: 36	Re: BONZEYE's 86 C10 LONGBED __________________ GO LOW OR GO HOME!!

06-29-2010, 11:45 AM	#48
BONZEYE Registered User Join Date: Oct 2009 Location: SAlinas, CA Posts: 36	Re: BONZEYE's 86 C10 LONGBED __________________ GO LOW OR GO HOME!!

09-13-2010, 07:58 PM	#49
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: BONZEYE's 86 C10 LONGBED any up dates? looking good

09-13-2010, 08:45 PM	#50
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: BONZEYE's 86 C10 LONGBED looks sweet Good luck with the build

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.