I can't handle it...my '72 jimmy needs to go lower.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sbrban · 06-01-2017, 12:16 AM

I took my Jimmy out this afternoon for a spin and was thinking it needs to be a little lower. It's a factory 2wd, so it won't be a problem to do.
My '71 burb has air ride and works/rides good but I think I want to static drop the Jimmy.
what seems to be the best route for a good 4/6 static drop?
Bell tech, Mcgougheys,ECE...?
Thanks for the help guys!

**lks dcvn** · 06-01-2017, 07:25 AM

I have used ECE on my trucks. Great parts, great customer service and decent prices.

3.5/6 may be what you are after...

Here are some stance photos to help you:

http://www.earlyclassic.com/tech.asp...nce%20Photos-3

I'm going 2.5/4 on my 72 2wd blazer.

**special-K** · 06-01-2017, 08:35 AM

I use ECE as well. Never tried anything else. No need.

**Tom Vogel** · 06-01-2017, 08:53 AM

Yes, ECE is really good. Although I added ECE's rear airbag setup because with static springs you will get different ride heights with top on and top off, not to mention the weight of passengers or cargo in the back. Just a thought.

sbrban · 06-01-2017, 05:45 PM

Well it sounds like ECE is the norm...thanks guys!

06-01-2017, 12:16 AM	#1
sbrban Registered User Join Date: Sep 2002 Location: Iowa Posts: 236	I can't handle it...my '72 jimmy needs to go lower.... I took my Jimmy out this afternoon for a spin and was thinking it needs to be a little lower. It's a factory 2wd, so it won't be a problem to do. My '71 burb has air ride and works/rides good but I think I want to static drop the Jimmy. what seems to be the best route for a good 4/6 static drop? Bell tech, Mcgougheys,ECE...? Thanks for the help guys! __________________ you never have too many suburbans....

06-01-2017, 07:25 AM	#2
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,338	Re: I can't handle it...my '72 jimmy needs to go lower.... I have used ECE on my trucks. Great parts, great customer service and decent prices. 3.5/6 may be what you are after... Here are some stance photos to help you: http://www.earlyclassic.com/tech.asp...nce%20Photos-3 I'm going 2.5/4 on my 72 2wd blazer.

06-01-2017, 08:35 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: I can't handle it...my '72 jimmy needs to go lower.... I use ECE as well. Never tried anything else. No need. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-01-2017, 08:53 AM	#4
Tom Vogel 2WD Jimmy Join Date: Mar 2005 Location: Davis County, Utah Posts: 2,563	Re: I can't handle it...my '72 jimmy needs to go lower.... Yes, ECE is really good. Although I added ECE's rear airbag setup because with static springs you will get different ride heights with top on and top off, not to mention the weight of passengers or cargo in the back. Just a thought. Last edited by Tom Vogel; 06-01-2017 at 08:59 AM.

06-01-2017, 05:45 PM	#5
sbrban Registered User Join Date: Sep 2002 Location: Iowa Posts: 236	Re: I can't handle it...my '72 jimmy needs to go lower.... Well it sounds like ECE is the norm...thanks guys! __________________ you never have too many suburbans....



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.