1969 C20 Lowered Custom - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LOW69C20 · 04-05-2012, 11:15 AM

Got the bed on last night, had to shim the back of the bed almost 3", is there a rubber mount I am missing?

LOW69C20 · 04-05-2012, 11:43 PM

RexDodge · 04-06-2012, 01:05 AM

Very nice. Are you going to the Portland Swap meet next week?

LOW69C20 · 04-06-2012, 01:10 AM

Quote:

Originally Posted by RexDodge

Very nice. Are you going to the Portland Swap meet next week?

Probably will be there, Have to make a list of what I need to finish my truck first. I did get several packages today from LMC, can't wait to dig into those.
Posted via Mobile Device

LOW69C20 · 04-07-2012, 01:23 AM

Got Wood?

LOW69C20 · 04-10-2012, 12:24 PM

**67cheby** · 04-10-2012, 12:46 PM

WOW...that is ALOT of lift !!

LOW69C20 · 04-10-2012, 12:49 PM

Quote:

Originally Posted by 67cheby

WOW...that is ALOT of lift !!

It has 11" travel front and back. It is higher than stock at full air, and 4" to frame aired out.

**67cheby** · 04-10-2012, 12:55 PM

what kind of bags do you have up front that gives that much lift ?

LOW69C20 · 04-10-2012, 01:01 PM

Quote:

Originally Posted by 67cheby

what kind of bags do you have up front that gives that much lift ?

D2600 front and rear. I think the height is because I did not use drop spindles.

LOW69C20 · 04-10-2012, 01:03 PM

**67cheby** · 04-10-2012, 01:04 PM

wow...that is huge !

LOW69C20 · 04-11-2012, 05:00 PM

Dash test fit, still have some work to do.

LOW69C20 · 04-12-2012, 10:25 AM

**67cheby** · 04-12-2012, 10:56 AM

WOW...tons of custom work , keep it up looks like you are almost done !

RexDodge · 04-12-2012, 12:14 PM

Quote:

Originally Posted by LOW69C20

Probably will be there, Have to make a list of what I need to finish my truck first. I did get several packages today from LMC, can't wait to dig into those.
Posted via Mobile Device

Can't wait to see what you got! I'm hitting the swap meet tomorrow. If that doesn't work out them I'm going Saturday.

**FRENCHBLUE72** · 04-12-2012, 08:20 PM

Looks like its getting there...

LOW69C20 · 04-15-2012, 12:11 PM

First drive yesterday in more than a year!!! put 7.5 miles on it

Had to replace the vacumn line to the transmission,
would not up-shift so I was leaving burnouts at every stop light.

it shifts great now with the new line.

Made a little progress on the gauges and interior. Found my C20 logos at the portland swap meet and saved $160.

LOW69C20 · 04-17-2012, 01:54 AM

Test drive! still need to finish grille, wheels, tailgate, and bed wood.

Hard Luck · 04-17-2012, 04:43 PM

Digg the custom look. How much do you think you pancaked the hood?

LOW69C20 · 04-18-2012, 01:32 PM

Quote:

Originally Posted by Hard Luck

Digg the custom look. How much do you think you pancaked the hood?

Thank you! I cut the front of the hood 1.5" (width of my tape roll)
Posted via Mobile Device

LOW69C20 · 05-15-2012, 11:26 AM

htt

Posted via Mobile Device
Posted via Mobile Device

RexDodge · 05-16-2012, 04:32 PM

Looks good! I'll bet it's good to be driving it. I finally found my fuel filler door. I'll start installing it this weekend. After that I can re-install my bed. Did you end up using that water pump pulley?

LOW69C20 · 07-02-2012, 03:02 PM

Dug the truck out for it's first show. Still have some body and interior work to complete, and of course wheels/ tires now that the watts link is installed but getting closer. I had one guy walk up and offer me $12K, I told him it was not for sale. Maybe if he had a more realistic number...

W.I.P.72 · 07-02-2012, 05:39 PM

I love the truck, very nice.

04-05-2012, 11:15 AM	#101
LOW69C20 Registered User Join Date: Jul 2011 Location: McMinnville, OR Posts: 83	Re: 1969 C20 Lowered Custom Got the bed on last night, had to shim the back of the bed almost 3", is there a rubber mount I am missing? Last edited by LOW69C20; 04-05-2012 at 11:20 AM.

04-05-2012, 11:43 PM	#102
LOW69C20 Registered User Join Date: Jul 2011 Location: McMinnville, OR Posts: 83	Re: 1969 C20 Lowered Custom

04-06-2012, 01:05 AM	#103
RexDodge Registered User Join Date: Apr 2008 Location: Oregon City, Oregon Posts: 741	Re: 1969 C20 Lowered Custom Very nice. Are you going to the Portland Swap meet next week?

04-07-2012, 01:23 AM	#105
LOW69C20 Registered User Join Date: Jul 2011 Location: McMinnville, OR Posts: 83	Re: 1969 C20 Lowered Custom Got Wood?

04-10-2012, 12:24 PM	#106
LOW69C20 Registered User Join Date: Jul 2011 Location: McMinnville, OR Posts: 83	Re: 1969 C20 Lowered Custom

04-10-2012, 12:46 PM	#107
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 1969 C20 Lowered Custom WOW...that is ALOT of lift !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

04-10-2012, 12:55 PM	#109
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 1969 C20 Lowered Custom what kind of bags do you have up front that gives that much lift ? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

04-10-2012, 01:03 PM	#111
LOW69C20 Registered User Join Date: Jul 2011 Location: McMinnville, OR Posts: 83	Re: 1969 C20 Lowered Custom

04-10-2012, 01:04 PM	#112
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 1969 C20 Lowered Custom wow...that is huge ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

04-11-2012, 05:00 PM	#113
LOW69C20 Registered User Join Date: Jul 2011 Location: McMinnville, OR Posts: 83	Re: 1969 C20 Lowered Custom Dash test fit, still have some work to do.

04-12-2012, 10:25 AM	#114
LOW69C20 Registered User Join Date: Jul 2011 Location: McMinnville, OR Posts: 83	Re: 1969 C20 Lowered Custom

04-12-2012, 10:56 AM	#115
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 1969 C20 Lowered Custom WOW...tons of custom work , keep it up looks like you are almost done ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

04-12-2012, 08:20 PM	#117
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,589	Re: 1969 C20 Lowered Custom Looks like its getting there... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

04-15-2012, 12:11 PM	#118
LOW69C20 Registered User Join Date: Jul 2011 Location: McMinnville, OR Posts: 83	Re: 1969 C20 Lowered Custom First drive yesterday in more than a year!!! put 7.5 miles on it Had to replace the vacumn line to the transmission, would not up-shift so I was leaving burnouts at every stop light. it shifts great now with the new line. Made a little progress on the gauges and interior. Found my C20 logos at the portland swap meet and saved $160.

04-17-2012, 01:54 AM	#119
LOW69C20 Registered User Join Date: Jul 2011 Location: McMinnville, OR Posts: 83	Re: 1969 C20 Lowered Custom Test drive! still need to finish grille, wheels, tailgate, and bed wood.



Register or Log In To remove these advertisements.

04-17-2012, 04:43 PM	#120
Hard Luck I've got grease on my mind. Join Date: Sep 2007 Location: Oly, Wa Posts: 481	Re: 1969 C20 Lowered Custom Digg the custom look. How much do you think you pancaked the hood?

05-15-2012, 11:26 AM	#122
LOW69C20 Registered User Join Date: Jul 2011 Location: McMinnville, OR Posts: 83	Re: 1969 C20 Lowered Custom htt Posted via Mobile Device Posted via Mobile Device

05-16-2012, 04:32 PM	#123
RexDodge Registered User Join Date: Apr 2008 Location: Oregon City, Oregon Posts: 741	Re: 1969 C20 Lowered Custom Looks good! I'll bet it's good to be driving it. I finally found my fuel filler door. I'll start installing it this weekend. After that I can re-install my bed. Did you end up using that water pump pulley?

07-02-2012, 03:02 PM	#124
LOW69C20 Registered User Join Date: Jul 2011 Location: McMinnville, OR Posts: 83	Re: 1969 C20 Lowered Custom Dug the truck out for it's first show. Still have some body and interior work to complete, and of course wheels/ tires now that the watts link is installed but getting closer. I had one guy walk up and offer me $12K, I told him it was not for sale. Maybe if he had a more realistic number...

07-02-2012, 05:39 PM	#125
W.I.P.72 Registered User Join Date: Jun 2012 Location: Oklahoma City, OK/ but I'm from Cali Posts: 101	Re: 1969 C20 Lowered Custom I love the truck, very nice. __________________ OKLAHOMA MEMBER MEET JUNE 15, MIDWEST CITY OK.http://67-72chevytrucks.com/vboard/s...d.php?t=559886 72 C-20 Stepside - Work In Progress

Register or Log In To remove these advertisements.