Project "Shifted" - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HotRod C/10 · 03-31-2013, 04:06 PM

Quote:

Originally Posted by rwade

Maybe I missed it, but what brand is your electric fan and shroud set up? Info on where to get it would be appreciated. Thanks
Posted via Mobile Device

http://outintheshop.com/faq/elec%20f...stallation.htm

big_al_71 · 03-31-2013, 05:08 PM

not one not two but three projects at the same time,,, Rob you are my idol!!

**Hart_Rod** · 04-01-2013, 08:54 AM

Quote:

Originally Posted by Zoomin

Always nice to get stuff in time for the weekend.

Yes sir!

Quote:

Originally Posted by Rusbuilt

Alright!

Quote:

Originally Posted by Hardesty454

Looks great!
Posted via Mobile Device

Thanks!

Quote:

Originally Posted by wutnxt

I really like the direction of this build it's very clean and updated with the original classic body lines. Nice set up.....thats going to be a very nice ride for a first ride. It's nice to see kids in the shop and them taking a intrest in it. I have 2 daughters that are in my shop often and we haven't built them a ride yet the deal is if you wanna drive it you have to help build it. Great job I wish that was in my garage......

Thanks!

Quote:

Originally Posted by HotRod C/10

http://outintheshop.com/faq/elec%20f...stallation.htm

That's the setup that it came with orginally, but I sold it and am switching to an Entropy setup.

Quote:

Originally Posted by big_al_71

not one not two but three projects at the same time,,, Rob you are my idol!!

Thanks Al! You would probably be more accurate calling me certifiably insane....

1lo67 · 04-01-2013, 10:19 AM

Nice truck.

shearjs · 04-01-2013, 05:18 PM

Very nice!

**Hart_Rod** · 04-16-2013, 10:30 PM

Quote:

Originally Posted by 1lo67

Nice truck.

Thanks!

Quote:

Originally Posted by shearjs

Very nice!

Thanks!

Well with a lot of help from BuckSS (thanks Ernie!!!), we finally got the chassis bolted back together. What do you think?

I still need to run the brake lines, fuel lines, finish welding the rear bag brackets, sandblast and paint rear end, have the driveshaft built and bolt in the fuel tank. So it shouldn't be much longer and the chassis will be ready to set the cab back on....

.

Zoomin · 04-16-2013, 10:55 PM

I just love the look of a fresh rolling chassis. If i had room in the shop, I'd do one and leave it that way.
Posted via Mobile Device

RRC · 04-16-2013, 11:03 PM

Quote:

Originally Posted by Zoomin

I just love the look of a fresh rolling chassis. If i had room in the shop, I'd do one and leave it that way.
Posted via Mobile Device

X2
Posted via Mobile Device

Rusbuilt · 04-17-2013, 06:52 AM

Looks good Rob!

cAlvis165 · 04-17-2013, 08:29 AM

I'm subscribing! Love the project. I'm hoping to do something like this with my son someday. He's only 5 now, but every time I blink he's a year older. Got to work on that blinking thing...

Enjoy the project with you son!

Chad

Bennett68C10 · 04-17-2013, 08:29 AM

Looks awesome Rob
Posted via Mobile Device

jrdv · 04-17-2013, 11:15 PM

That frame looks really good!

n2billet · 04-18-2013, 06:03 AM

Looks very NICE, will look even better with the cab on it!

**Hart_Rod** · 04-18-2013, 10:17 AM

Quote:

Originally Posted by Zoomin

I just love the look of a fresh rolling chassis. If i had room in the shop, I'd do one and leave it that way.
Posted via Mobile Device

I hear that!

Quote:

Originally Posted by RRC

X2
Posted via Mobile Device

Quote:

Originally Posted by Rusbuilt

Looks good Rob!

Thanks!

Quote:

Originally Posted by cAlvis165

I'm subscribing! Love the project. I'm hoping to do something like this with my son someday. He's only 5 now, but every time I blink he's a year older. Got to work on that blinking thing...

Enjoy the project with you son!

Chad

Thanks Chad.

Quote:

Originally Posted by Bennett--G4L

Looks awesome Rob
Posted via Mobile Device

Thanks!

Quote:

Originally Posted by jrdv

That frame looks really good!

Thanks!

Quote:

Originally Posted by n2billet

Looks very NICE, will look even better with the cab on it!

Thanks! I want to finish the brake lines, fuel lines and the driveshaft before putting the cab.

tommyd241 · 04-30-2013, 09:59 AM

Another amazing build! Subscribed!

**Hart_Rod** · 05-29-2013, 09:03 PM

Quote:

Originally Posted by tommyd241

Another amazing build! Subscribed!

Thanks Tommy!

***

I don't have a lot of pictures to post, but I have been making some minor progress on this one (even though I've been spending more time on mine...

). Doing my best N2BILLET impersonation, I finished the front brake lines. I can now drop the motor back in and finish fuel lines and rear brake lines. After that, I can put the cab back on and maybe make some real progress,

. I also have the accessory brackets figure out. I bought a set of the Holley LS bracket for my truck and it looks like they will work on his also

! PICS!!!

Bennett68C10 · 05-29-2013, 09:57 PM

Looks great rob, nice job on the brake lines. What did you use to run the brake lines through the frame. I like the way it looks.
Posted via Mobile Device

**Hart_Rod** · 05-29-2013, 10:47 PM

Quote:

Originally Posted by Bennett--G4L

Looks great rob, nice job on the brake lines. What did you use to run the brake lines through the frame. I like the way it looks.
Posted via Mobile Device

Keith, the braided lines that came with my CPP brake it has a bulkhead fitting built into it. All I had to do was drill a 5/8" hole, push the fitting through and then install the keeper. Pretty strait forward and clean.

Rusbuilt · 05-29-2013, 10:49 PM

Rob I thing N2billet will be proud! lol

**screaminchevypickup** · 05-30-2013, 12:18 AM

Looks great rob!!
Posted via Mobile Device

**Hart_Rod** · 05-30-2013, 10:10 AM

Quote:

Originally Posted by screaminchevypickup

Looks great rob!!
Posted via Mobile Device

Thanks!

Quote:

Originally Posted by Rusbuilt

Rob I thin5 N2billet will be proud! lol

I don't know about that....

, but I thought it was OK since it's been 5 or 6 years since I've bent up any lines. Here's the "extremely complex" tool I used to bend them,

.

c10Dream'n · 05-30-2013, 10:52 AM

just awesome, keep up the good work..

jasonhall · 05-30-2013, 01:50 PM

Cool tool
Posted via Mobile Device

**lolife99** · 05-30-2013, 01:57 PM

Great job on the brake lines.

I finally got access to a set of good benders.
I consider these the best.
And it really makes a difference when bending lines.
They are Swagelok brand,.. like these.

72BlckButy · 05-30-2013, 02:05 PM

Looks good Rob!

Keith... is that an internet picture or some bends you've produced recently?

03-31-2013, 05:08 PM	#102
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Project "Shifted" not one not two but three projects at the same time,,, Rob you are my idol!! __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

04-01-2013, 10:19 AM	#104
1lo67 Registered User Join Date: May 2005 Location: Morristown, Tn Posts: 275	Re: Project "Shifted" Nice truck.

04-01-2013, 05:18 PM	#105
shearjs Registered User Join Date: Mar 2011 Location: Thompsons Station, TN Posts: 700	Re: Project "Shifted" Very nice! __________________ -Jason '72 Family Hauler Rufus' Restoration - 70 GMC, LS swap - SOLD

04-16-2013, 10:55 PM	#107
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: Project "Shifted" I just love the look of a fresh rolling chassis. If i had room in the shop, I'd do one and leave it that way. Posted via Mobile Device __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

04-17-2013, 06:52 AM	#109
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Project "Shifted" Looks good Rob! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

04-17-2013, 08:29 AM	#110
cAlvis165 Registered User Join Date: Aug 2011 Location: N.E. OH Posts: 214	Re: Project "Shifted" I'm subscribing! Love the project. I'm hoping to do something like this with my son someday. He's only 5 now, but every time I blink he's a year older. Got to work on that blinking thing... Enjoy the project with you son! Chad __________________ Success is not final, failure is not fatal: it is the courage to continue that counts. Winston Churchill DD 2000 Chevy Suburban 4x4/5.3 Vortec/4L60E/4:10s, 18" Escalade rims, Electric fans Project Dooley One-Ton 4x4 on 38.5s Corn-binder build

04-17-2013, 08:29 AM	#111
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project "Shifted" Looks awesome Rob Posted via Mobile Device __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

04-17-2013, 11:15 PM	#112
jrdv Registered User Join Date: Apr 2000 Location: new mexico Posts: 948	Re: Project "Shifted" That frame looks really good! __________________ 1972 3/4T 4x4 Chevrolet (383) 1971 c-10 SWB (400 sb) 1972 4x4 Blazer 1969 SWB 4x4 GMC Projects: 1972 stepside 4x4 http://67-72chevytrucks.com/vboard/s...d.php?t=280132 http://67-72chevytrucks.com/vboard/s...d.php?t=285952 http://67-72chevytrucks.com/vboard/s...d.php?t=553672 http://67-72chevytrucks.com/vboard/s...d.php?t=522704

04-18-2013, 06:03 AM	#113
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: Project "Shifted" Looks very NICE, will look even better with the cab on it! __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold

04-30-2013, 09:59 AM	#115
tommyd241 Registered User Join Date: May 2008 Location: 505 Posts: 447	Re: Project "Shifted" Another amazing build! Subscribed! __________________ '68 SWB Fleetside '98 K1500 Silverado

05-29-2013, 09:57 PM	#117
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project "Shifted" Looks great rob, nice job on the brake lines. What did you use to run the brake lines through the frame. I like the way it looks. Posted via Mobile Device __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

05-29-2013, 10:49 PM	#119
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Project "Shifted" Rob I thing N2billet will be proud! lol __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

05-30-2013, 12:18 AM	#120
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: Project "Shifted" Looks great rob!! Posted via Mobile Device __________________ 72 chevy swb Direct dealers for.. Vintage Air, Porterbuilt, Billet Specialties,Budnik wheels ,eddie motorsports, raceline wheels, intro wheels, Dakota Digital, precision, unisteer, Trimparts, and many many more... Laid Back Recreations.. Full restoration shop and full paint and body.. Kyle http://67-72chevytrucks.com/vboard/s...d.php?t=574629

05-30-2013, 10:52 AM	#122
c10Dream'n Registered User Join Date: Dec 2012 Location: San Diego Posts: 519	Re: Project "Shifted" just awesome, keep up the good work..

05-30-2013, 01:50 PM	#123
jasonhall Registered User Join Date: May 2008 Location: Stillwater Oklahoma Posts: 829	Re: Project "Shifted" Cool tool Posted via Mobile Device



Register or Log In To remove these advertisements.

05-30-2013, 01:57 PM	#124
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,682	Re: Project "Shifted" Great job on the brake lines. I finally got access to a set of good benders. I consider these the best. And it really makes a difference when bending lines. They are Swagelok brand,.. like these. Attached Images __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

05-30-2013, 02:05 PM	#125
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Project "Shifted" Looks good Rob! Keith... is that an internet picture or some bends you've produced recently? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.