TX WTB - Heater Core retainer screws

[Jason Banks]

I have the 2 bars that go around the heater core. But, there was only 1 screw in each one. They are kind of an odd screw. I think they are a #6 but they have a bigger head. Probably so they don't go through the fiberglass easily.

I'm not opposed to buying everything. Someone please help!

[randy500]

I think those are the same screws that secure the wire gutter to the firewall and the same plastic loom on the core support.

[Jason Banks]

I just went and put calipers on the core retaining ones and they measure .065.

I put calipers on the ones that hold the gutter and they measure from .082 to .085 (couldn't get a consistent read)

However, the heads on both of them are the same. This is on a 1968 with heat only, by the way.

[Jason Banks]

That got me to looking at sheet metal screw sizes and the gutter ones must be No.2 while the ones for the heater core are No.0 or No.1

[Chevy4Life]

http://67-72chevytrucks.com/vboard/s...d.php?t=729230

I have these. I'm already missing 1 of them so PM me your address and I'll get them headed your way.