|
|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-26-2006, 04:36 PM
|
#1 |
|
Registered User
 Join Date: Apr 2006
Location: Fort Walton Beach, FL
Posts: 224
|
Update on my 68 LS project.
I havent posted for awhile due to being super busy!!! I am in the middle of a move from Wichita Falls Texas to Phoenix Arizona. I was forced to hurry up and bolt what parts I have together so I could get the truck on the trailor to move it. The pics below are of the truck just bolted together. Ignore the body lines the truck has to come back apart to paint the frame (just Por15 right now), powder coat the spindles/brake calipers, run the brake lines, and paint the whole truck. You can see what I have done so far. The truck started as a low mileadge rust free long bed. I have shortened the frame, Z-ed the rear, shortened the bed, installed, disk brakes, drop spindles, 20 by 10's, and 18 by 8's, and the Geniii motor is just sitting in there. I have not decided if Im going to run the LS motor or a Duramax. Enjoy the pics. The first 2 pics are the truck stock.
__________________
68 lwb to swb Cummins swap in the works. I promise it will be cool someday. Last edited by 68GenIII; 11-26-2006 at 04:43 PM. |
|
|
|
11-26-2006, 04:38 PM
|
#2 |
|
Registered User
Join Date: Apr 2006
Location: Fort Walton Beach, FL
Posts: 224
|
Re: Update on my 68 LS project.
Sorry the first pics didnt load here they are.
__________________
68 lwb to swb Cummins swap in the works. I promise it will be cool someday. |
|
|
|
|
11-26-2006, 04:39 PM
|
#3 |
|
Registered User
Join Date: Apr 2006
Location: Fort Walton Beach, FL
Posts: 224
|
Re: Update on my 68 LS project.
And the last of them.
__________________
68 lwb to swb Cummins swap in the works. I promise it will be cool someday. |
|
|
|
|
11-26-2006, 04:40 PM
|
#4 |
|
Senior Member
 
Join Date: Jul 2005
Location: Winters Ca. 95694
Posts: 4,552
|
Re: Update on my 68 LS project.
Looking good! I know far to well about moving and truck projects! Mine has been moved 3 times and is just now getting worked on after comming apart 6 or 7 years ago
 Kevin LFD Inc.
__________________
AccuAir PorterBuilt Street Rods LFD Inc. Lewis Fabrication Design Inc. Go to www.lewisfabricationdesign.com then Click on the Product button to purchase your own plans for the; 67-72 Tip and Flip Cab Dolly. 55-59 Tip and Flip cab dolly. One Man cab and bed lift. 67-70 Gas Pedal mounting kit. |
|
|
|
|
11-26-2006, 04:41 PM
|
#5 |
|
Registered User
Join Date: Apr 2006
Location: Fort Walton Beach, FL
Posts: 224
|
Re: Update on my 68 LS project.
Sorry the last of them are below.
__________________
68 lwb to swb Cummins swap in the works. I promise it will be cool someday. |
|
|
|
|
11-26-2006, 05:20 PM
|
#6 |
|
Insert Title Here
Join Date: Feb 2006
Location: Dyer, IN.
Posts: 5,257
|
Re: Update on my 68 LS project.
looks good... I would go with the GenIII for sure
__________________
BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all << |
|
|
|
|
11-26-2006, 05:29 PM
|
#7 |
|
Account Suspended
Join Date: Nov 2004
Location: Deer Park, Tx.
Posts: 2,527
|
Re: Update on my 68 LS project.
I like it, looks good. How hard was it to weld up the bedsides without warpage so bad?
|
|
|
|
|
11-26-2006, 05:57 PM
|
#8 |
|
Registered User
 
Join Date: Oct 2005
Location: Sacramento, CA
Posts: 1,574
|
Re: Update on my 68 LS project.
What size are your Coy's?.....and what size tires are you running?
Does the rear rim sit in a little further (in relation to the fender) than the front? Truck stance looks great!!
__________________
72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank -  My Build Thread |
|
|
|
|
11-26-2006, 06:49 PM
|
#9 |
|
Better than I Deserve...
 
Join Date: Jul 2006
Location: Central PA
Posts: 10,517
|
Re: Update on my 68 LS project.
very nice truck
|
|
|
|
|
11-26-2006, 08:30 PM
|
#10 |
|
Senior Member
Join Date: Dec 2003
Location: Colorado
Posts: 353
|
Re: Update on my 68 LS project.
Nice truck. Man, when those 68's are lowered they have a real sleek look to them. Sits well.
__________________
The Fastor Pastor '68 swb, 447 BBC/ 6-71 Weiand, Dual 950 Bigs Carbs/ 2 1/2" Header tubes - 4" collectors/ M-21 4speed: '70 swb; TH-400 - bagged & shaved. Looking for new engine or parts. Wife - Original {A Real Classic!} 
|
|
|
|
|
11-26-2006, 08:39 PM
|
#11 |
|
Senior Member
Join Date: Apr 2004
Location: Northern Arizona
Posts: 687
|
Re: Update on my 68 LS project.
Looks good man. Welcome to AZ, Im fairly new to this area as well. Sure seems to be alot of members in this state.
__________________
70 GMC shortbed fleetside with a 72 chevy costume |
|
|
|
|
11-26-2006, 08:40 PM
|
#12 |
|
Senior Member
Join Date: Jul 2006
Location: Blountville, Tn.
Posts: 2,924
|
Re: Update on my 68 LS project.
Nice truck, I am a diesel fan so I would go for the duramax. A duramax stuffed in one of these trucks as the WOW! factor written all over it.
|
|
|
|
|
11-26-2006, 10:44 PM
|
#13 |
|
Senior Member
Join Date: Dec 2003
Location: Mesa,Az
Posts: 2,306
|
Re: Update on my 68 LS project.
Welcome to AZ... if you're here yet!
I am a huge fan of the GenIII... but a Duramax would be killer! I haven't seen one in a 67-72 yet... sure it's been done, but I haven't seen it first hand yet. The truck is looking good... keep us posted on the progress.
__________________
www.dropmember.com Please E-Mail me with all technical questions and pricing requests: nathan@porterbuiltstreetrods.com Innovators of the Dropmember Authorized Dealer for Accuair Suspension Authorized Dealer for AVS Authorized Dealer for KP Components Authorized Dealer for Air Ride Technologies Authorized Dealer for ECE Authorized Dealer for CPP |
|
|
|
11-27-2006, 11:52 AM
|
#14 |
|
Parts and more parts
Join Date: Nov 2003
Location: Lebo, Kansas (middle of nowhere
Posts: 4,842
|
Re: Update on my 68 LS project.
I am presently working to put a genn III in a 68 Chevy truck, but I have many miles to go to get to your level of accomplishment. Mine is still in pieces all over the floor.
|
|
|
|
|
11-27-2006, 03:17 PM
|
#15 | |
|
Registered User
Join Date: Apr 2006
Location: Fort Walton Beach, FL
Posts: 224
|
Re: Update on my 68 LS project.
Quote:
__________________
68 lwb to swb Cummins swap in the works. I promise it will be cool someday. |
|
|
|
|
|
11-27-2006, 03:19 PM
|
#16 | |
|
Registered User
Join Date: Apr 2006
Location: Fort Walton Beach, FL
Posts: 224
|
Re: Update on my 68 LS project.
Quote:
__________________
68 lwb to swb Cummins swap in the works. I promise it will be cool someday. |
|
|
|
|
|
11-27-2006, 03:23 PM
|
#17 | |
|
Registered User
Join Date: Apr 2006
Location: Fort Walton Beach, FL
Posts: 224
|
Re: Update on my 68 LS project.
Quote:
__________________
68 lwb to swb Cummins swap in the works. I promise it will be cool someday. |
|
|
|
|
|
11-27-2006, 03:29 PM
|
#18 | |
|
Registered User
Join Date: Apr 2006
Location: Fort Walton Beach, FL
Posts: 224
|
Re: Update on my 68 LS project.
Quote:
 Its just bolted it together so I could roll it on the trailor so I could bring it to Phoenix with me for Thanksgiving. One last thing in Texas to worry about. Now I just have to worry about finishing and selling my house in Texas and finding a job in Phoenix, oh yeah and the baby we have due Feb 2!!
__________________
68 lwb to swb Cummins swap in the works. I promise it will be cool someday. |
|
|
|
|
|
11-27-2006, 03:34 PM
|
#19 |
|
Registered User
Join Date: Dec 2003
Location: Glendale Arizona
Posts: 722
|
Re: Update on my 68 LS project.
Welcome To Phoenix. Truck looks good, hope to see it at the 83 and beardlsey cruise spot once its dont and back together.
__________________
"A true hotrodder wouldn't be content untill he had created a car so violent, so hairy, so totally sick that the very act of dropping the hammer would result in instant death. Anything less results in the need to go faster." - Tony DeFeo 69 Long bed C/10 (dirty little secret)- 350 .40 over, .454" Comp Cam, 650 Edelbrock and intake, Mallory HEI, TH350 with shift kit and 2500 stall Hughes converter, Hooker Comp Headers with 2.5 duals h-pipe and Flowmaster 40's 99 Yukon (daily driver) - 4x4, 6K HID's, 3" body lift, 33" BFG KM2's on 16X10 M/T Classic Locks, dual ice cold a/c and warm heat, comfy seats, and full power options lol everything a good daily needs. |
|
|
|
|
11-27-2006, 03:34 PM
|
#20 |
|
Shaved
Join Date: Nov 2004
Location: Vernon, Tx
Posts: 115
|
Re: Update on my 68 LS project.
I just noticed you live in the Falls! I live in Vernon! Man I wish I would've known!!! Would've made arrangements to come hang out sometime...That is if you don't mind sharing some of your secrets with a kid haha...anyway, nice truck and sorry to hear about you leaving the Lone Star State.
__________________
1969 
|
|
|
|
|
11-27-2006, 06:03 PM
|
#21 |
|
Adam B
Join Date: Jul 2005
Location: Indianapolis
Posts: 143
|
Re: Update on my 68 LS project.
Man, that is one of the cooler project trucks I have seen on this site!! I love the wheel comb and stance. Additionally, the shorting of the bed with the wheel look, is spot on.
Please post pictures of how you shorten the bed and the frame, if you have some of these. It looks very hard to me, but maybe you can shed some light on how this is done. Adam |
|
|
|
|
11-27-2006, 06:07 PM
|
#22 | |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 10,177
|
Re: Update on my 68 LS project.
Quote:
?
__________________
67SWB-B.B.RetroRod 64SWB-Stella 74SWB-Driver/Tow Truck All Fleetsides http://www.hubgarage.com/mygarage/scoti Last edited by SCOTI; 11-27-2006 at 06:07 PM. |
|
|
|
|
|
11-27-2006, 07:56 PM
|
#23 |
|
Account Suspended
Join Date: Nov 2004
Location: Deer Park, Tx.
Posts: 2,527
|
Re: Update on my 68 LS project.
That's what I was thinking Scoti. LOL! Talking about having some cojones!
|
|
|
|
|
11-27-2006, 10:11 PM
|
#24 |
|
Registered User
Join Date: Oct 2005
Location: Sacramento, CA
Posts: 1,574
|
Re: Update on my 68 LS project.
What offsets are you using on the wheels?
__________________
72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread |
|
|
|
|
11-28-2006, 08:38 AM
|
#25 | |
|
Registered User
Join Date: Apr 2006
Location: Fort Walton Beach, FL
Posts: 224
|
Re: Update on my 68 LS project.
Quote:
__________________
68 lwb to swb Cummins swap in the works. I promise it will be cool someday. |
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
